Uncategorized

  • Ninja Microbore Fill Whip
    $59.95 – $69.95

    Microbore 4500PSI Extension

    Ninja Microbore Fill Whip
    $59.95 – $69.95
    • 30% Lighter and Smaller than standard HPA hoses
    • Extremely flexible 30 or 46 inch hose
    • 4500 PSI working pressure
    • Works with any HPA or CO2 system
    • Made in USA
    Select options
  • Side Shot Scope Clamps
    $59.99
    Side Shot Scope Clamps
    $59.99

    The clamps come in 1″, 30mm and 34mm to fit your scope tube. They allow you to mount have multiple clamps already installed on your rifles so all you need to do is slide on the Side-Shot, tighten the thumbscrews and record!

    These parts are 100% American-made, precision CNC’d parts! These clamps are precision machined, sent in to be anodized, and then back for assembly.

    Solid, Secure and its stainless steel parts keep it from rusting.

    Select options
  • Saber Tactical 55mm Clamp
    $59.99

    Clamp with Pic rail

    Saber Tactical 55mm Clamp
    $59.99

    If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

    Fits perfectly for Umarex Gauntlets Stock tanks.

    This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

    Select options
  • Sold out!
    $60.00
    DISCONTINUED
    HP Strip Stak Pak for Evanix Air Speed
    $60.00

    Evanix Air Speed Air Stripper and Baffle Stack _
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options
  • Emperor/Ronin Extender
    $60.00

    V3 6.26 inch Extension

    Emperor/Ronin Extender
    $60.00

    THIS IS AN AIRGUN ONLY PART

     

    Is the 10.5 inch Emperor v3 still too loud for you? If so add this 6.25 inch expansion chamber to the rear of the Emperor to make it even quieter. This increases the air volume that gets captured inside the suppressor. Works with the latest version of the Ronin as well. If it has the grooves in the front cap, it’s the latest model.

    Select options
  • $60.00

    GOPRO Camera Housing

    Eaglevision GOPRO Camera Housing
    $60.00

    EV GoPro Camera Housings.

    • Camera Case model for GoPro 5-6-7
    • Camera Case for 9-10-11-12

     

    Select options
  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options
  • Sale!
    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $85.00

    Gauntlet STK

    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $85.00

    THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
    IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

    The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

    Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1) 

    For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
    BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

    CONTENTS:

    • Adjuster Plug Assembly.
    • Smaller, Lighter Composite Poppet.
    • Hajimoto Hammer Spring (Black Long)
    • Lighter Trigger Spring (Bright Small).
    • 5/64″ Allen Wrench For Adjusting Power.

    The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
    Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

    Be sure to follow my written instructions in the document below.
    Use the video to install but follow these written instructions to adjust and tune the STK:

    Written Detailed Tuning Instructions for the STK

    More details below.
    Always read the content below because any revised instructions, video, photos, or other links will be there.

    Select options
  • FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00
    FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00

    FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

    You will want these rings if you are planning on using my Expanded Magazine.

    Select options
  • $99.00

    Tanto 1.22 x 5 inches

    Tanto 1.22 x 5 inches
    $99.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Sale!
    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    With or Without Cylinder

    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    Convert your Air Venturi Avenger into a bottle PCP!

    • Adapter Threaded for M18 x 1.5 Air Cylinder.
    • Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
    • All Stainless Steel Construction.

    Made in South Africa

     

    Installation video below:

    Select options
  • FX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Tatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • Sold out!
    Eaglevision Side-Cam SPLITTER ONLY
    $134.00

    SC-40 ONLY not a full kit

    Eaglevision Side-Cam SPLITTER ONLY
    $134.00
    Please note:
    This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)
    Select options
  • Gauntlet Tactical Conversion Kit
    $139.99

    For G1, G2/22, G2/25, G30, SL22, SL25 or SL30

    Gauntlet Tactical Conversion Kit
    $139.99

    Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!

    • Laser Sintered Nylon construction. LIFETIME WARRANTY
    • Made in the USA by a veteran-owned business
    • Add an AR Pistol Grip and Adjustable Buttstock to your Gauntlet
    • Compatible with Gauntlet G1, G2, and SL30
    • Accepts Milspec or Commercial AR15/AR308 Extension Tubes
    • Handguard accepts M Lok accessories
    • Over 1 pound of weight savings over OEM stock

    Installation video is listed below

     

     

    Select options
  • $144.95

    Ninja X Reg Custom Output Regulator up to 3100psi

    Ninja High Pressure 5/8″-18UNF Custom Output Regulator
    $144.95

    5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

    We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

    You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

    This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber

    Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
    Select options
  • Ninja Pro V3 Regulator 5/8″ Thread
    $148.00
    NEW MODEL

    Pro V3 for 3K and 4.5K Cylinders

    Ninja Pro V3 Regulator 5/8″ Thread
    $148.00

    The All New Hajimoto Pro V3 in 5/8”-18UNF Thread with Stainless Steel Cap Threads

    Ninja's Pro V3 with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
    Select options
  • Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    5/8″-18UNF Threaded Unit

    Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
    Say goodbye to only one fixed output pressure!
    The user has an 800PSI adjustment swing!
    Requires minor forestock modification.
    The regulator thread is 5/8-18UNF

    The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
    If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

    How to read the below configurations
    Example: Flex Reg .22 | 4500/1600 to 2400 psi
    Flex Reg .22 = Regulator Type for .22 caliber
    4500/ = The bottle’s maximum fill pressure
    1600 to 2400 psi = The output range of the Flex Reg

    Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex Reg .177/.22 |3000/700 to 1500PSI

    Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex Reg .25 | 3000/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
    Stock .22 | 4500/1900PSI Regulator
    Flex Reg .22 | 4500/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
    Stock .25 | 4500/2100PSI Regulator
    Flex Reg .25 | 4500/1600 to 2400PSI

    Flex Reg Configuration For G30 Cal
    Stock .30 | 4500/2800PSI Regulator
    Flex Reg .30 | 4500/2100 to 3100PSI

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Select options
  • $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Ninja High Pressure Metric M18 Custom Output
    $154.95 – $155.00
    Ninja High Pressure Metric M18 Custom Output
    $154.95 – $155.00

    The Hajimoto M18*1.5 Thread can be used on 3000PSI bottles as well. Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to switch over to these polished brass version once all the black steel bonnets are gone.

    This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

    We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

    You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

    Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
    Select options
  • Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator
    $155.00
    NEW MODEL

    PRO V3 REG WITH 13CI TANK

    Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator
    $155.00 

    Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

    This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator
    Select options
  • Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Flex Reg on 13ci Aluminum 3K

    Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Introducing a Hajimoto Productions Exclusive offer!

    13ci/213cc/.21L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1600 to 2400PSI

    Installs on the Gauntlet with minor tank shroud modifications.

    A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.