Uncategorized

TIP System
This interface to pay any outstanding service balances, odd nonlisted item purchases, or if you simply want to leave a donation, this is the place to do that.

Easy 1-2-3 process
- Please use the NOTES section to tell us what the Payment is for.
- Please include an order number if the payment is related to an existing order.
- Enter the payment amount.
- Add the transaction to the Cart.
- Click on VIEW CART to review.
- If you are satisfied with the cart contents, click on CHECKOUT.
Thank you!
Select options
50 to 250
For either G30 or G30SL
G30 Barrel Service Lab
50 to 250
Select options
$4.00
Ninja fill port o’ring
Fill Port O’ring Fits Ninja
$4.00

5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators

Select options
Sold out!
Original price was: $11.00.Current price is: $7.50.
clamps onto 20mm Pic Rail
Picatinny Rail Anti-cant level
Original price was: $11.00.Current price is: $7.50.

Bubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount

Read more
$8.00
Tank to PCP O-rings (10 Pak)
$8.00

10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT

Select options
Sale!
$10.99 – $99.99
Dead Center Pellets
JTS Dead Center Pellets
$10.99 – $99.99
JTS Dead Center Pellets are the result of 2 years of development resulting in a premium airgun pellet line that utilizes the latest manufacturing equipment and processes to ensure quality and consistency. JTS engineers used aerodynamic principles when designing these pellets to ensure that every shot you make is accurate.

Even the screw-off lid on the tin is designed with air gunners in mind. The pellets are packed in each tin with foam on top and on the bottom to help keep these old boys pristine when you are ready to load them.

Best shipping value is realized when you buy in four sleeve quantities.

Available in:
- .22 caliber 18.1 gr 250 pcs per tin
- .25 caliber 25.3 gr 150 pcs per tin.
View the video below to see these pellets in action from our TacVenger Bullpup bottle gun at 50 yards!
Select options
Sold out!
$14.00
Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00

Zero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.

Read more
$14.50
20oz Double wall Stainless
Hajimoto Productions Hot or Cold 20oz Tumbler
$14.50
Hajimoto Merch

The tumbler capacity 600 ml/ 20 oz, the insulated cup can hold cold or hot beverages, like water, tea, milk, wine, boiled water, coffee, juice, and more.

Clever and Practical Design: the coffee tumblers are made of quality 304 stainless steel material, with a reliable double wall design to insulate the interior beverage in an ideal temperature, and the lids are made of quality ABS material, equipped with a detachable rubber ring to achieve a better sealing effect, and there is a hole on the lids for inserting straws(not included), and the push lid design prevents drinks from spilling.

Fits most cup holders.

Dimensions:
- Top Width: 3.25″
- Height: 6.65″
- Bottom width: 2.75″
Select options
$15.00 – $70.00
Bipod and Picatinny Rail
$15.00 – $70.00

Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

Select options
$17.00
Gauntlet 1 and Gauntlet 2
Umarex Gauntlet Tune O-ring Kit
$17.00
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

Some of the NO-Ring seals have the leading edge precision ground.

These tapered / precision ground types need to be installed as shown below

(Images are of the .30 caliber NO RING)

You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
Select options
Sold out!
$17.00
DISCONTINUED
Ninja Magna Cap Fill Nipple Cover – BLACK
$17.00

Patented Magnetic design Lightweight Aluminum Helps to keep the dirt out!

MADE IN THE USA!!!!

Read more
$18.50
Umarex Gauntlet Regulator Shim Pak
$18.50
Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
  (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.

DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

If you rapid fill, there is a good chance you will pop your burst disc.
Select options
$20.00
HP Baffle Stack For Umarex Gauntlet
Rated 5.00 out of 5
$20.00

Part fits either the original Gauntlet or the Gauntlet 2

THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

Select options
$21.95
Ninja Regulator Rebuild Kit Part #NINJARBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #NINJARBK – Rebuild Kit for Ninja NON Pro Regulators.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
Ninja PRO V2 Regulator Rebuild Kit Part #PRORBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #PRORBK – This Rebuild Kit for Ninja Pro V2 Regulators ONLY.

Like the one below:

This rebuild kit is not for the Umarex Gauntlet Stock Regulator.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
3/4″ Black face 3000PSI gauge
3000PSI 1/8″ NPT Pressure Gauge
$21.95
- 1/8″ NPT THREAD
- 3000PSI DIAL MAX
Select options
$21.95
Mini 5000PSI face
Ninja Black Mini Gauge
$21.95

Ninja Paintballs mini pressure gauge.

Face is black and the dial reads to 5000PSI

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
$24.95 – $30.00
Ninja Paintball X Reg Rebuild Kit #NINJARBKX
$24.95 – $30.00

Ninja Paintball Tank Regulator Replacement Part #X_REG_RBLDKT – This Rebuild Kit for Ninja X Regulators ONLY.
Like the one below:

Other variants are for the Gauntlet 2 in .22 caliber, .25 caliber, and .30 caliber. Be sure to select the proper kit type. User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

There is a Flex Reg option but it requires photos so we can be sure what variant you have.

Select options
$28.00
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5
$28.00

Part fits either the original Gauntlet or the Gauntlet 2

You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$30.00 – $35.00
Fits Gauntlet 1, 2 even the .30 Cal
HP Barrel Band For Umarex Gauntlet
Rated 5.00 out of 5
$30.00 – $35.00

Available in the classic Picatinny rail version or the 15mm thick rail less version.

Fits both the original Gauntlet as well as the Gauntlet 2 including the G30 or G30SL!

Select options
$30.00
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00

This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

Select options
Sale!
Original price was: $45.00.Current price is: $30.00.
WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
Original price was: $45.00.Current price is: $30.00.
Westhunter Adjustable height scope rings
- Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
- The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
- The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
- Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
- The finishing touch to the dovetail rail and optic combination.
- Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.
Specifications listed below
Select options
Sold out!
$35.00
Evanix Rainstorm II Baffle Stack
$35.00

Evanix Rainstorm II Baffle Stack

Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

Baffles should be pointing towards the breech

<= Towards the breech —— Towards the Muzzle of shroud =>

[░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
SO SC NC NC SC SC NC NC

SO = STAND OFF
NC = NORMAL CONE
SC = SHORT CONE

Select options
Sold out!
$35.00
Artemis PP750 1/2 x 20 #A68
$35.00

Fits the Artemis PP750 PCP

This part is designed and manufactured by DonnyFL

Read more
Sale!
Original price was: $39.99.Current price is: $35.00.
HP Stak Pak for Hatsan QE
Rated 5.00 out of 5
Original price was: $39.99.Current price is: $35.00.

Stak Pak for Hatsan QE shrouds (.357 & .457 Not Included)

Simply unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the very first full-sized baffle and then arrange the stack as shown in the packaging.

A ten-piece kit that directly replaces the two hair curler style baffles that come inside any Hatsan that has a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove both noise and turbulence in the air stream. The baffle stack rides on a high tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357 & .457 models.

The end result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.

Installation video is listed in the DESCRIPTION section below

Select options
Sold out!
$35.00
DonnyFL KOI/Tanto Endcaps
$35.00

KOI and Tanto End caps in 1/2 x 20 threads

Select options
$35.00
Air Venturi Avenger Bottle Conversion Barrel Band
Avenger Bottle Conversion – Barrel Band
$35.00
Available in two sizes:
- Small 59-61mm Diameter CF Tank (Typically fits 0.35L (350cc), 0.36L (360cc), 0.42L (420cc), 0.45L (450cc), 0.50L (500cc), & 0.70L (700cc) cylinders)
- Large 62-63mm Diameter CF Tank (Typically fits: 0.38L (380cc), 0.48L (480cc) & 0.58L (580cc) Cylinders)
** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **

The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.
Select options
$35.00
HP Avenger Exp Mag .22
$35.00

Expanded Magazine for the .22 Caliber Avenger

Select options
$35.00
HP Avenger Exp Mag .177
$35.00

Expanded Magazine for the .177 Caliber Avenger

Select options
$35.00
HP Avenger Exp Mag .25
$35.00

Expanded Magazine for the .25 Caliber Avenger

Select options
$35.00
Replacement end caps
Emperor/Ronin End Caps
$35.00

THIS IS AN AIRGUN ONLY PART

Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

Select options
$40.00
Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
$40.00

Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

This part is designed and manufactured by DonnyFL

Select options
$40.00
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00

Fits the Benjamin Akela and Kratos PCP’s

This part is designed and manufactured by DonnyFL

Select options
$40.00
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00

INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$40.00
HP Avenger Exp Mag .22 RED/BLACK
$40.00

Expanded Magazine for the .22 Caliber Avenger RED/BLACK

Select options
$40.00
HP Avenger Exp Mag .25 RED/BLACK
$40.00

Expanded Magazine for the .25 Caliber Avenger RED/BLACK

Please be sure to measure your free area or clearance between the bottom of your scope to the top of the magazine well.

The magazine’s height is 50.25MM (1.978″)

Our Mini mag .25 holds 11 rounds is only 1.6″ tall

Select options
$40.00
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

This adapter does not fit on the Umarex Hammer Carbine.

Select options
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$45.00
Regulator Service or Pressure Change
Regulator Service or Pressure Change
$45.00

This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

Select options
Sold out!
$45.00
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00

Specifically for the AV Avenger

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This part is designed and manufactured by DonnyFL

Read more
$45.00
HP Strip Stak Pak for PP750
$45.00

Strip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada

Select options
$45.00
Umarex Origin 1/2 x 20 Adapter #A70
$45.00

Specifically for the Umarex Origin

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.

This part is designed and manufactured by DonnyFL

Select options
$45.00
Beeman Underlever 1357 | 1358 Adapter #A86
$45.00

Specifically for the Beeman 1357 / 1358

This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.

This part is designed and manufactured by DonnyFL

Select options
$47.00
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00

UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Avenger

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$47.00
Origin .22/.25
HP Strip Stak Pak for Origin
Rated 4.33 out of 5
$47.00

NEW ENHANCED DESIGN

UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$50.00
DonnyFL A115 JTS Adapter
JTS Airacuda Adapter #A115
$50.00
Specifically for the Airacuda Standard or the Max in any Caliber (.22, .25, or .30)

Because this adapter was made to fit both the Standard and Max versions of the AiraCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not affect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design with this flexibility to overcome the challenges of this airgun’s shroud design so that moderators could be used.

Key Features:
- Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
- Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
This part is designed and manufactured by DonnyFL
Select options
$59.95 – $69.95
Microbore 4500PSI Extension
Ninja Microbore Fill Whip
$59.95 – $69.95
- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Select options
$59.99
Side Shot Scope Clamps
$59.99

The clamps come in 1″, 30mm and 34mm to fit your scope tube. They allow you to mount have multiple clamps already installed on your rifles so all you need to do is slide on the Side-Shot, tighten the thumbscrews and record!

These parts are 100% American-made, precision CNC’d parts! These clamps are precision machined, sent in to be anodized, and then back for assembly.

Solid, Secure and its stainless steel parts keep it from rusting.

Select options
$59.99
Clamp with Pic rail
Saber Tactical 55mm Clamp
$59.99

If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

Fits perfectly for Umarex Gauntlets Stock tanks.

This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

Select options
Sold out!
$60.00
DISCONTINUED
HP Strip Stak Pak for Evanix Air Speed
$60.00

Evanix Air Speed Air Stripper and Baffle Stack _
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$60.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
Rated 5.00 out of 5
$60.00

Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

This part is designed and manufactured by DonnyFL

Select options
$60.00
V3 6.26 inch Extension
Emperor/Ronin Extender
$60.00

THIS IS AN AIRGUN ONLY PART

Is the 10.5 inch Emperor v3 still too loud for you? If so add this 6.25 inch expansion chamber to the rear of the Emperor to make it even quieter. This increases the air volume that gets captured inside the suppressor. Works with the latest version of the Ronin as well. If it has the grooves in the front cap, it’s the latest model.

Select options
$60.00
GOPRO Camera Housing
Eaglevision GOPRO Camera Housing
$60.00
EV GoPro Camera Housings.
- Camera Case model for GoPro 5-6-7
- Camera Case for 9-10-11-12
Select options
$65.00
Gauntlet Regulator Tester
$65.00

Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

Select options
Sale!
$75.00 – $85.00
Gauntlet STK
Super Tune Kit (STK) for Gauntlet 1 and 2
Rated 5.00 out of 5
$75.00 – $85.00
THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1)

For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

CONTENTS:
- Adjuster Plug Assembly.
- Smaller, Lighter Composite Poppet.
- Hajimoto Hammer Spring (Black Long)
- Lighter Trigger Spring (Bright Small).
- 5/64″ Allen Wrench For Adjusting Power.
The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

Be sure to follow my written instructions in the document below.
Use the video to install but follow these written instructions to adjust and tune the STK:

Written Detailed Tuning Instructions for the STK

More details below.
Always read the content below because any revised instructions, video, photos, or other links will be there.
Select options
$79.00 – $99.00
FX No Limit Scope Rings 1″, 30mm and 34mm
$79.00 – $99.00

FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

You will want these rings if you are planning on using my Expanded Magazine.

Select options
$99.00
Tanto 1.22 x 5 inches
Tanto 1.22 x 5 inches
$99.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

Select options
Sale!
$115.00 – $424.00
With or Without Cylinder
Doux Avenger Bottle Adapter
$115.00 – $424.00
Convert your Air Venturi Avenger into a bottle PCP!
- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa

Installation video below:
Select options
$120.00
DonnyFL FX Suppressor
FX/DonnyFL 1.36 x 5 inches
$120.00

THIS IS AN AIRGUN ONLY PART

This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

Select options
$130.00
Tatsu 1.6 x 4.25 inches
Tatsu 1.6 x 4.25 inches
Rated 5.00 out of 5
$130.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

Select options
$130.00 – $215.00
for .177, .22 and .25 NOT .30
Gauntlet Short Shroud Combo
$130.00 – $215.00
This part is designed and manufactured by DonnyFL for airgun use only

Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

If Your Gauntlet is:
- .177 Get a .177/.22 Supressor
- .22 Get a .22/.25 Supressor
- .25 Get a .25/.30 Supressor
Get it?
Select options
Sold out!
$134.00
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Select options
$144.95
Ninja X Reg Custom Output Regulator up to 3100psi
Ninja High Pressure 5/8″-18UNF Custom Output Regulator
$144.95
5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
```
Select options

$148.00

NEW MODEL

Pro V3 for 3K and 4.5K Cylinders

Ninja Pro V3 Regulator 5/8″ Thread

$148.00

The All New Hajimoto Pro V3 in 5/8”-18UNF Thread with Stainless Steel Cap Threads

Ninja's Pro V3 with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.

Select options

$149.00 – $159.00
5/8″-18UNF Threaded Unit
Flex Reg Hajimoto Configurations
$149.00 – $159.00

Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800PSI adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF

The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg

Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/700 to 1500PSI

Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1600 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1600 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1600 to 2400PSI

Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Select options
$150.00
Sumo 1.6 x 6.25 inches
$150.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

Select options
$154.95 – $155.00
Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00
The Hajimoto M18*1.5 Thread can be used on 3000PSI bottles as well.

The Bonnet is Steel not aluminum for maximum strength and low wear.

This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
```
Select options

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

NEW MODEL

PRO V3 REG WITH 13CI TANK

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator

Select options

$169.00
Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
$169.00

Introducing a Hajimoto Productions Exclusive offer!

13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSI

Installs on the Gauntlet with minor tank shroud modifications.

A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
$173.00 – $175.00
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00

Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

Stock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

This setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!

NINJA REGULATORS ARE MADE IN THE USA!

Select options
Sold out!
$175.00
2 x 4.25 inches Fatboy 2.0
Fat Boy 2 x 4.25 inches
$175.00
THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

2 x 4.25 inches Fatboy 2.0

Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.

Features:
Compatible with .177 to .30 calibers

Includes 3 interchangeable air strippers

Redesigned 1/2 x 20 rear cap for easy gripping

Can be used with the 6.25 inch extender for more hush power

Measure 4.25 inches long by 2 inches in diameter

Weighs only 6.7 oz
Read more
$185.00
Shogun 1.6 x 8 inches
$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

Select options
$185.00
Ronin 2 x 6.25 inch
Rated 5.00 out of 5
$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.

The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.

We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.

If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs

If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.

Select options
$195.00
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$195.00

Introducing a Hajimoto Productions Exclusive offer!

22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI

If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sale!
Original price was: $260.00.Current price is: $220.00.
0.5L/500cc CE Certified CF Tank
0.50L Carbon Fiber Tank 4500PSI
Original price was: $260.00.Current price is: $220.00.

Half a liter of air, right here!

0.5L/500cc CE Certified CF Tank
Perfect fit for your custom build.

M18x1.5 Threaded

This is the same bottle we use on the TacVenger builds we offer.

Select options
$239.99
DonnyFL EMPEROR V3 Moderator
Emperor 2 x 11 inch
$239.99

THIS IS AN AIRGUN ONLY PART

Introducing the largest DonnyFL suppressor catered to the big bore guns.

Overall length 11 inches and weighs in at 1 lb.

This thing is built like a tank to tame those power hungry shooters.

Select options
$240.00
NEW MODEL
WestHunter WHT 4-16×44 FFP Scope
$240.00
The WHT Tactical First Focal Plane 4-16×44 Rifle Scope

Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Sun Shade
- Front and rear flip up lens covers
- Large Magnification Wheel (Removable)
Optional adjustable height scope rings are available

Features
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
- This optic has passed very strict WestHunter performance testing.
Specifications listed below
Select options
Sale!
Original price was: $325.00.Current price is: $260.00.
NEW MODEL
WestHunter WHT 6-24×44 FFP Scope
Original price was: $325.00.Current price is: $260.00.
The WHT Tactical First Focal Plane 6-24×44 Rifle Scope

Do not confuse this optic with the less robust Westhunter HD 6-24×50 Scope

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Honeycomb sunshade/diffuser
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- Shorter, lighter and brighter than the previous HD model.
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior WHT image clarity makes this a slam dunk when it comes to value for the dollar.
Specifications listed below
Select options
Sale!
Original price was: $390.00.Current price is: $280.00.
0.7L/700cc CE Certified CF Tank
0.70L Carbon Fiber Tank 4500PSI
Original price was: $390.00.Current price is: $280.00.

0.7L/700cc CE Certified CF Tank
Perfect fit for your custom build.

M18x1.5 Threaded

If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.

Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE

Select options
Sold out!
Original price was: $339.00.Current price is: $295.00.
Flex Reg on 18ci/295cc/.29L CE Certified CF Tank
Power Flex Combo 18.3ci Carbon Fiber 4500PSI
Original price was: $339.00.Current price is: $295.00.
Introducing a Hajimoto Productions Exclusive offering!
18ci/295cc/.29L CE Certified CF Tank

Fits the Gauntlet 2 without any modifications.

The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. An 18.3ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet! The massive volume of air afforded you is mind-blowing.

The diameter of the tank is 54-55mm across so a modification to the forearm is required if you desire to continue to use the Gauntlets tank shroud. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Gauntlet Bottle Shroud Mod

Please see the examples provided in the accompanying photos.

The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. Please be careful if you have accessories on any of the MLok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!.

The cylinder’s outside dimension is slightly larger than the stock aluminum tank so my standard HP Barrel Band does not fit. You will need to use the HP Barrel Band CFT version
```
Regulator is Made in the USA!
The Power Flex Combo is set to either of the two Gauntlet configurations.
Simply select the proper configuration.

Power Flex Combo Configuration For .177/.22 Cal
Flex Reg set to 700 to 1500PSI
```
```
Power Flex Combo Configuration For .25 Cal
Flex Reg set to 1600 to 2400PSI
```
```
DO NOT USE Power Flex Combo Configuration For .25 CONFIG on .177 or .22
they are not capable of handling the pressures.
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
```
Select options
$310.00 – $350.00
500cc CF Tank with Adjustable Reg
Flex Reg RTI Version & Tank
$310.00 – $350.00

Flex Reg designed and configured specifically for RTI PCP’S such as Prophet, Priest, & Priest 2
This Flex Reg comes paired with a brand-new Carbon fiber 4500PSI tank. The regulator is externally adjustable and has an effective adjustable range of 900PSI (62bar).

Using the slider you select what the maximum output will be and because the regulator has the ability to adjust, you can reduce that maximum output pressure down as much as 900PSI (62bar). You can of course set the pressure anywhere along that 900PSI (62bar) range to suit your tuning requirements. The regulator will not have a pin or ball seal in the bonnet. The tank cannot be removed while under pressure and must be degassed.

Because of practical limitations, regulator max output will be +/- 50PSI (3.5bar) within the requested maximum output.

Comes with a spanner wrench for adjusting the output on the fly.

** This regulator is 5/8″-18UNF threaded and will not fit M18 threaded bottles. This configured Reg is not sold separately.

Select options
Sale!
Original price was: $375.00.Current price is: $330.00.
Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank
Power Flex Combo 22.5ci Carbon Fiber 4500PSI
Original price was: $375.00.Current price is: $330.00.

Introducing a Hajimoto Productions Exclusive offer!

22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder. Installation video at the bottom of the page.

The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.

The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 75PSI to the requested output.

Select options
Sale!
$349.00 – $360.00
Flex reg and 30ci/500cc/.5L CE Certified CF Tank
Power Flex Combo 30ci/.5L Carbon Fiber 4500PSI
$349.00 – $360.00

Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation.

Introducing a Hajimoto Productions Exclusive offer!

30ci/500cc/.5L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This includes a 30ci/500cc/.5L CE Certified 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 900PSI!

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

Select options
Sale!
Original price was: $440.00.Current price is: $351.00.
TD 5-30X56 FFP 34mm W/Zero Stop
WestHunter TD 5-30X56 SFIR FFP Scope
Original price was: $440.00.Current price is: $351.00.
The Westhunter TD 5-30X56 SFIR FFP

Package includes:
- Scope
- 1 set of 34mm Picatinny Scope Rings
- Sunshade
- Large focus wheel.
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Massive 30x Magnification
- Incredibly large 56mm objective lens
- As close as 10 yards on the focus
- Zero Stop Turret.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior TD image clarity makes this a slam dunk when it comes to value for the dollar.
Here is a link to instructions for the ZERO STOP FEATURE

Specifications listed below
Select options
Sale!
$360.00 – $419.00
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
$360.00 – $419.00

Awesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!

Ninja Paintball High Pressure Regulator mounted on a quality 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.

We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI

All custom built pressure units will have a +/- 75 psi tolerance.

Select options
Sale!
Original price was: $460.00.Current price is: $419.00.
HP M18 Reg and 700cc/.7L CE Certified CF Tank
Power 700 Combo
Original price was: $460.00.Current price is: $419.00.

The Power 700 Combo is a 4500PSI Ninja High-Pressure M18 reg mounted on a 0.7L/700cc Carbon Fiber 4500PSI Cylinder.

The High-Pressure reg paired with the 700cc cylinder means shots galore!

Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation. Use the Notes if you are looking for a lower PSI than 2800PSI as we can build the reg to ANY PSI 3100PSI and lower.

Consider adding our Barrel Band made for the Power 700 Combo!

Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

Select options
$499.00 – $650.00
NEW MODEL
JTS COMP1 Portable HPA Compressor
$499.00 – $650.00
JTS COMP1 Portable PCP Compressor
- Max. pressure: up to 4,500 PSI.
- Power converter is built inside unit.
- Exclusive heat pipe cooling system.
- Adjustable auto-shutoff.
- Power source: 12V car battery or 110V/220V outlet.
- Moisture filter.
- The compressor includes carrying handle.
- Thermal dissipation system with high-flow fan cooling.
- No oil required.
- Built-in water separator.
- Jumper cables included.
- Includes fill hose.
- Sealed needle-style crankshaft roller bearing.
CONSIDER THE PACKAGE DEAL FOR AWESOME SAVINGS
Package deal includes Compressor, Large Filter with two Cartridges, and Microbore fill whip!

Here are the COMP1 OWNERS MANUAL and schematic for your use and reference.

The oil to use for this compressor is 100% synthetic and can be purchased through AMAZON at the following LINK
This lubrication has high thermal and oxidation stability assuring long fluid life in both operating and storage conditions; Excellent performance in high temperature, high load, and continuous operating conditions.

The JTS COMP1 compressor is exempt from any other published discounts or coupon codes.
All/any warranties are manufacturer provided.

Please follow the CUSTOMER REPAIR REQUEST information found on the JTS website
.
Select options
$625.00
Hajimoto Tune My Gauntlet G1 or G2
$625.00
We completely tune your supplied Gauntlet 1 or 2 which includes everything listed in the section below.

The service includes a very detailed and time-consuming incoming inspection report that includes photos and other relevant information that detail the condition of the airgun and all of its pieces and parts. This report is provided to you and you must be reviewed and authorized in order for the work to continue.

Ordering procedures:
- Add all services and items to your cart.
- Be sure to use the notes section to communicate any known issues or special instructions.
- Check out.
Shortly after the order is received, you will receive an email notification containing shipping information that will include labeling and packaging requirements.

To better understand how the Gauntlet is transformed from a static you get what you get type of airgun, into an adjustable power and tunable PCP, take a look at this video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition in order to get it to fly at the best rate of travel for that particular ammunition.
HOW TO ADJUST POWER WITH STK

We will build your order based on the information provided from the questionnaire as well as any specific requests, and before the airgun ships, any credits or additional charges will be settled.
Select options