-
TIP System
This interface to pay any outstanding service balances, odd nonlisted item purchases, or if you simply want to leave a donation, this is the place to do that.
Easy 1-2-3 process
- Please use the NOTES section to tell us what the Payment is for.
- Please include an order number if the payment is related to an existing order.
- Enter the payment amount.
- Add the transaction to the Cart.
- Click on VIEW CART to review.
- If you are satisfied with the cart contents, click on CHECKOUT.
Thank you!
-
Ninja fill port o’ring
Fill Port O’ring Fits Ninja
$4.00Select options5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators
-
Sold out!
clamps onto 20mm Pic Rail
Picatinny Rail Anti-cant level
$11.00Original price was: $11.00.$7.50Current price is: $7.50.Bubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount
-
Tank to PCP O-rings (10 Pak)
$8.00Select options10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT
-
Sale!
Dead Center Pellets
JTS Dead Center Pellets
$10.99 – $99.99Select optionsJTS Dead Center Pellets are the result of 2 years of development resulting in a premium airgun pellet line that utilizes the latest manufacturing equipment and processes to ensure quality and consistency. JTS engineers used aerodynamic principles when designing these pellets to ensure that every shot you make is accurate.
Even the screw-off lid on the tin is designed with air gunners in mind. The pellets are packed in each tin with foam on top and on the bottom to help keep these old boys pristine when you are ready to load them.
Best shipping value is realized when you buy in four sleeve quantities.
Available in:
- .22 caliber 18.1 gr 250 pcs per tin
- .25 caliber 25.3 gr 150 pcs per tin.
View the video below to see these pellets in action from our TacVenger Bullpup bottle gun at 50 yards!
-
Sold out!
Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00Read moreZero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.
-
20oz Double wall Stainless
Hajimoto Productions Hot or Cold 20oz Tumbler
$14.50Select optionsHajimoto Merch
The tumbler capacity 600 ml/ 20 oz, the insulated cup can hold cold or hot beverages, like water, tea, milk, wine, boiled water, coffee, juice, and more.
Clever and Practical Design: the coffee tumblers are made of quality 304 stainless steel material, with a reliable double wall design to insulate the interior beverage in an ideal temperature, and the lids are made of quality ABS material, equipped with a detachable rubber ring to achieve a better sealing effect, and there is a hole on the lids for inserting straws(not included), and the push lid design prevents drinks from spilling.
Fits most cup holders.
Dimensions:
- Top Width: 3.25″
- Height: 6.65″
- Bottom width: 2.75″
-
Bipod and Picatinny Rail
$15.00 – $70.00Select optionsInstallation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
-
Gauntlet 1 and Gauntlet 2
Umarex Gauntlet Tune O-ring Kit
$17.00Select optionsHajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
-
Sold out!DISCONTINUED
Ninja Magna Cap Fill Nipple Cover – BLACK
$17.00Read morePatented Magnetic design Lightweight Aluminum Helps to keep the dirt out!
MADE IN THE USA!!!!
-
Umarex Gauntlet Regulator Shim Pak
$18.50Select optionsHajimoto Productions Regulator Shim Kit For Umarex Gauntlet
I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.
The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
(Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.
You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.
If you rapid fill, there is a good chance you will pop your burst disc.
-
HP Baffle Stack For Umarex Gauntlet
Rated 5.00 out of 5$20.00Select optionsPart fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
-
Ninja Regulator Rebuild Kit Part #NINJARBK
$21.95Select optionsNinja Paintball Tank Regulator Replacement Part #NINJARBK – Rebuild Kit for Ninja NON Pro Regulators.
User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)
-
3/4″ Black face 3000PSI gauge
3000PSI 1/8″ NPT Pressure Gauge
$21.95Select options- 1/8″ NPT THREAD
- 3000PSI DIAL MAX
-
30mm Long Quick Connecter
Extended Fill Coupler
$22.00Select options- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
-
Ninja Paintball X Reg Rebuild Kit #NINJARBKX
$24.95 – $30.00Select optionsNinja Paintball Tank Regulator Replacement Part #X_REG_RBLDKT – This Rebuild Kit for Ninja X Regulators ONLY.
Like the one below:Other variants are for the Gauntlet 2 in .22 caliber, .25 caliber, and .30 caliber. Be sure to select the proper kit type. User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)
There is a Flex Reg option but it requires photos so we can be sure what variant you have.
-
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5$28.00Select optionsPart fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
-
Fits Gauntlet 1, 2 even the .30 Cal
HP Barrel Band For Umarex Gauntlet
Rated 5.00 out of 5$30.00 – $35.00Select options -
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00Select optionsThis part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.
The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same
-
Sale!
WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
$45.00Original price was: $45.00.$30.00Current price is: $30.00.Westhunter Adjustable height scope rings
- Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
- The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
- The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
- Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
- The finishing touch to the dovetail rail and optic combination.
- Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.
Specifications listed below