-
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00Select optionsIncludes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.
PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI RegulatorStock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 RegulatorThis setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!
NINJA REGULATORS ARE MADE IN THE USA!
-
Sold out!
2 x 4.25 inches Fatboy 2.0
Fat Boy 2 x 4.25 inches
$175.00Read moreTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
2 x 4.25 inches Fatboy 2.0
Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.
Features:
- Compatible with .177 to .30 calibers
- Includes 3 interchangeable air strippers
- Redesigned 1/2 x 20 rear cap for easy gripping
- Can be used with the 6.25 inch extender for more hush power
- Measure 4.25 inches long by 2 inches in diameter
- Weighs only 6.7 oz
-
Shogun 1.6 x 8 inches
$185.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end. -
Ronin 2 x 6.25 inch
Rated 5.00 out of 5$185.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.
The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.
We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPsIf you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.
-
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$195.00Select optionsIntroducing a Hajimoto Productions Exclusive offer!
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSIIf you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.
A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
-
Sale!
0.5L/500cc CE Certified CF Tank
0.50L Carbon Fiber Tank 4500PSI
$260.00Original price was: $260.00.$220.00Current price is: $220.00. -
DonnyFL EMPEROR V3 Moderator
Emperor 2 x 11 inch
$239.99Select optionsTHIS IS AN AIRGUN ONLY PART
Introducing the largest DonnyFL suppressor catered to the big bore guns.
Overall length 11 inches and weighs in at 1 lb.
This thing is built like a tank to tame those power hungry shooters.
-
NEW MODEL
WestHunter WHT 4-16×44 FFP Scope
$240.00Select optionsThe WHT Tactical First Focal Plane 4-16×44 Rifle Scope
Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model
Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Sun Shade
- Front and rear flip up lens covers
- Large Magnification Wheel (Removable)
Optional adjustable height scope rings are available
Features
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
- This optic has passed very strict WestHunter performance testing.
Specifications listed below
-
Sale!NEW MODEL
WestHunter WHT 6-24×44 FFP Scope
$325.00Original price was: $325.00.$260.00Current price is: $260.00.The WHT Tactical First Focal Plane 6-24×44 Rifle Scope
Do not confuse this optic with the less robust Westhunter HD 6-24×50 Scope
Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Honeycomb sunshade/diffuser
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- Shorter, lighter and brighter than the previous HD model.
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior WHT image clarity makes this a slam dunk when it comes to value for the dollar.
Specifications listed below
-
Sale!
0.7L/700cc CE Certified CF Tank
0.70L Carbon Fiber Tank 4500PSI
$390.00Original price was: $390.00.$280.00Current price is: $280.00.0.7L/700cc CE Certified CF Tank
Perfect fit for your custom build.
M18x1.5 Threaded
If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.
Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE
-
Sold out!
Flex Reg on 18ci/295cc/.29L CE Certified CF Tank
Power Flex Combo 18.3ci Carbon Fiber 4500PSI
$339.00Original price was: $339.00.$295.00Current price is: $295.00.Introducing a Hajimoto Productions Exclusive offering!
18ci/295cc/.29L CE Certified CF TankFits the Gauntlet 2 without any modifications.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. An 18.3ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet! The massive volume of air afforded you is mind-blowing.
The diameter of the tank is 54-55mm across so a modification to the forearm is required if you desire to continue to use the Gauntlets tank shroud. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
Gauntlet Bottle Shroud Mod
Please see the examples provided in the accompanying photos.
The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. Please be careful if you have accessories on any of the MLok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!.
The cylinder’s outside dimension is slightly larger than the stock aluminum tank so my standard HP Barrel Band does not fit. You will need to use the HP Barrel Band CFT version
Regulator is Made in the USA! The Power Flex Combo is set to either of the two Gauntlet configurations. Simply select the proper configuration. Power Flex Combo Configuration For .177/.22 Cal Flex Reg set to 700 to 1500PSI
Power Flex Combo Configuration For .25 Cal Flex Reg set to 1600 to 2400PSI
DO NOT USE Power Flex Combo Configuration For .25 CONFIG on .177 or .22 they are not capable of handling the pressures. Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
-
500cc CF Tank with Adjustable Reg
Flex Reg RTI Version & Tank
$310.00 – $350.00Select optionsFlex Reg designed and configured specifically for RTI PCP’S such as Prophet, Priest, & Priest 2
This Flex Reg comes paired with a brand-new Carbon fiber 4500PSI tank. The regulator is externally adjustable and has an effective adjustable range of 900PSI (62bar).Using the slider you select what the maximum output will be and because the regulator has the ability to adjust, you can reduce that maximum output pressure down as much as 900PSI (62bar). You can of course set the pressure anywhere along that 900PSI (62bar) range to suit your tuning requirements. The regulator will not have a pin or ball seal in the bonnet. The tank cannot be removed while under pressure and must be degassed.
Because of practical limitations, regulator max output will be +/- 50PSI (3.5bar) within the requested maximum output.
Comes with a spanner wrench for adjusting the output on the fly.
** This regulator is 5/8″-18UNF threaded and will not fit M18 threaded bottles. This configured Reg is not sold separately.
-
Sale!
Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank
Power Flex Combo 22.5ci Carbon Fiber 4500PSI
$375.00Original price was: $375.00.$330.00Current price is: $330.00.Introducing a Hajimoto Productions Exclusive offer!
22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder. Installation video at the bottom of the page.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 75PSI to the requested output.
-
Sale!
Flex reg and 30ci/500cc/.5L CE Certified CF Tank
Power Flex Combo 30ci/.5L Carbon Fiber 4500PSI
$349.00 – $360.00Select optionsPlease note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation.
Introducing a Hajimoto Productions Exclusive offer!
30ci/500cc/.5L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This includes a 30ci/500cc/.5L CE Certified 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 900PSI!
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.
-
Sale!
TD 5-30X56 FFP 34mm W/Zero Stop
WestHunter TD 5-30X56 SFIR FFP Scope
$440.00Original price was: $440.00.$351.00Current price is: $351.00.The Westhunter TD 5-30X56 SFIR FFP
Package includes:
- Scope
- 1 set of 34mm Picatinny Scope Rings
- Sunshade
- Large focus wheel.
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Massive 30x Magnification
- Incredibly large 56mm objective lens
- As close as 10 yards on the focus
- Zero Stop Turret.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior TD image clarity makes this a slam dunk when it comes to value for the dollar.
Here is a link to instructions for the ZERO STOP FEATURE
Specifications listed below
-
Sale!
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
$360.00 – $419.00Select optionsAwesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!
Ninja Paintball High Pressure Regulator mounted on a quality 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.
We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.
-
Sale!
HP M18 Reg and 700cc/.7L CE Certified CF Tank
Power 700 Combo
$460.00Original price was: $460.00.$419.00Current price is: $419.00.The Power 700 Combo is a 4500PSI Ninja High-Pressure M18 reg mounted on a 0.7L/700cc Carbon Fiber 4500PSI Cylinder.
The High-Pressure reg paired with the 700cc cylinder means shots galore!
Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation. Use the Notes if you are looking for a lower PSI than 2800PSI as we can build the reg to ANY PSI 3100PSI and lower.
Consider adding our Barrel Band made for the Power 700 Combo!
Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.
-
NEW MODEL
JTS COMP1 Portable HPA Compressor
$499.00 – $650.00Select optionsJTS COMP1 Portable PCP Compressor
- Max. pressure: up to 4,500 PSI.
- Power converter is built inside unit.
- Exclusive heat pipe cooling system.
- Adjustable auto-shutoff.
- Power source: 12V car battery or 110V/220V outlet.
- Moisture filter.
- The compressor includes carrying handle.
- Thermal dissipation system with high-flow fan cooling.
- No oil required.
- Built-in water separator.
- Jumper cables included.
- Includes fill hose.
- Sealed needle-style crankshaft roller bearing.
CONSIDER THE PACKAGE DEAL FOR AWESOME SAVINGS
Package deal includes Compressor, Large Filter with two Cartridges, and Microbore fill whip!Here are the COMP1 OWNERS MANUAL and schematic for your use and reference.
The oil to use for this compressor is 100% synthetic and can be purchased through AMAZON at the following LINK
This lubrication has high thermal and oxidation stability assuring long fluid life in both operating and storage conditions; Excellent performance in high temperature, high load, and continuous operating conditions.The JTS COMP1 compressor is exempt from any other published discounts or coupon codes.
All/any warranties are manufacturer provided.Please follow the CUSTOMER REPAIR REQUEST information found on the JTS website
. -
Hajimoto Tune My Gauntlet G1 or G2
$625.00Select optionsWe completely tune your supplied Gauntlet 1 or 2 which includes everything listed in the section below.
The service includes a very detailed and time-consuming incoming inspection report that includes photos and other relevant information that detail the condition of the airgun and all of its pieces and parts. This report is provided to you and you must be reviewed and authorized in order for the work to continue.
Ordering procedures:
- Add all services and items to your cart.
- Be sure to use the notes section to communicate any known issues or special instructions.
- Check out.
Shortly after the order is received, you will receive an email notification containing shipping information that will include labeling and packaging requirements.
To better understand how the Gauntlet is transformed from a static you get what you get type of airgun, into an adjustable power and tunable PCP, take a look at this video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition in order to get it to fly at the best rate of travel for that particular ammunition.
HOW TO ADJUST POWER WITH STKWe will build your order based on the information provided from the questionnaire as well as any specific requests, and before the airgun ships, any credits or additional charges will be settled.