Sumo 1.6 x 6.25 inches

$150.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

Clear
SKU: HPDFLSUM Categories: , , , Tags: , , , ,

Description

  • Latest model with swappable rear endcaps.
  • Mono-core design to increase accuracy and limit the chances of pellet clipping
  • No moving parts or epoxy that may become loose after 1000’s of rounds
  • Precision CNC’d by professional machinist
  • Sand blasted and anodized for maximum durability
  • Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
  • Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
  • Comes pre-wrapped in felt
  • Machined grooves on the outside for easy handling.
  • Weight 5.6 oz

Additional information

Weight 6 oz
Dimensions 6.25 × 1.6 × 1.6 in
Caliber

, ,

Reviews

There are no reviews yet.

Be the first to review “Sumo 1.6 x 6.25 inches”

Related products

  • Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00

    Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

    This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

    If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

    This part is designed and manufactured by DonnyFL

    Select options
  • Bipod and Picatinny Rail
    $15.00 – $70.00
    Bipod and Picatinny Rail
    $15.00 – $70.00

    Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

    Select options
  • $45.00

    Regulator Service or Pressure Change

    Regulator Service or Pressure Change
    $45.00

    This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

    Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

    Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

    When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

    This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

    Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.