Air Rifle Mods/Parts

  • G30 Barrel Service Lab
    50 to 250

    For either G30 or G30SL

    G30 Barrel Service Lab
    50 to 250
    Select options
  • Umarex Gauntlet Baffle Spring
    $7.00

    Gauntlet Barrel Baffle Spring

    Umarex Gauntlet Baffle Spring
    $7.00

    Umarex Gauntlet .177, .22, or .25 Baffle Spring.

    Part is not compatible with Gauntlet .30 Caliber

    This is the spring that lives in your Gauntlets Shroud. It is required to keep the air stripper on the end of the barrel and allows the baffle or baffle stack to live under tension.

     

    Select options
  • Sale!
    QD PORT SLING SWIVEL AND BASE
    Original price was: $14.99.Current price is: $9.99.
    QD PORT SLING SWIVEL AND BASE
    Original price was: $14.99.Current price is: $9.99.

    QD Sling Mount Sling Swivel Quick Detach Release Push Button QD Sling Swivels for MLOK SLOTS.

    Quick Disconnect 

    Select options
  • $11.00
    GRIP
    $11.00

    Basic starter Grip for TacVenger Build

    Select options
  • $12.50
    PatchWorm Pocket Field Kit
    $12.50
    The PatchWorm Pocket Field Kit (PFK) is made entirely of durable nylon and is designed to pull a clean patch with every stroke. It’s a far more refined alternative to pulling a dirty snake through your barrel…
    This universal cleaning kit is so compact, it fits comfortably in a shirt pocket. Standard rifle rods are 36″ long from tip to head (not including the extra “tail” for easy extraction should the rod get stuck for any reason) and will clean up to 28″ barrels.
    The rifle version has 8 color-coded cleaning heads:

    .20 cal (green) – permanently attached
    .22 cal (white)
    .243 – .284 cal (black)
    .308 – .348 cal (red)
    .355 – .40 cal (purple)
    .41 – .45 cal (orange)
    .50 – .54 cal (blue)
    12 gauge (yellow)

    The PFK comes with dozens of wet (with Ballistol Sportsman’s Oil) and dry patches (7/8″ diameter), suitable for all bore sizes through .35 caliber. Larger 1 1/4″ diameter patches are available separately for the larger calibers. Reusable flip-lid containers are included for convenient storage.
    Fouling is most easily removed while the barrel is still warm. Slide on a cleaning head, pierce 1 wet patch, feed into the chamber, and pull straight from the muzzle. Flip patch, pull again, remove the wet patch. Pierce 1 dry patch, repeat. Where a range of calibers is specified for a cleaning head, a second patch can be added (stacked on top of the first) for the larger caliber to achieve a tight finishing stroke.
    Select options
  • Sale!
    Original price was: $17.95.Current price is: $14.00.

    Stock Umarex Magazine

    Umarex Gauntlet Rotary Magazine
    Original price was: $17.95.Current price is: $14.00.

    The Gauntlet Rotary Magazine advances each pellet with the operation of the bolt on the Umarex Gauntlet PCP air rifle.

    Features

    • .177 = 12 shots
    • .22 = 10 shots
    • .25 = 8 shots
    • .30 = 7 shots
    Select options
  • Bipod and Picatinny Rail
    $15.00 – $70.00
    Bipod and Picatinny Rail
    $15.00 – $70.00

    Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options
  • Umarex Gauntlet Regulator Shim Pak
    $18.50
    Umarex Gauntlet Regulator Shim Pak
    $18.50

    Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

    I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

    The shim kit contains:

    • 2 – #5 Shims.
    • 1 – #3 Shim.
    • 2 – #2 Shims.
      (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

    To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
    To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
    The included two #2 shims are for minor adjustments if you have a finicky regulator.

    DETAILED LESSON/EXAMPLE:
    Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

    Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

    You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

    If you rapid fill, there is a good chance you will pop your burst disc.

     

    Select options
  • $20.00
    HP Baffle Stack For Umarex Gauntlet
    $20.00

    Part fits either the original Gauntlet or the Gauntlet 2

    THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

    Select options
  • Buffer Tube with Castle nut
    $25.00

    Tube and Nut

    Buffer Tube with Castle nut
    $25.00

    Commercial grade buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock

    Select options
  • Barra 1100z Stak Pak W/Spring
    $27.00

    5 Piece Stak Pak W/Spring

    Barra 1100z Stak Pak W/Spring
    $27.00

    Only fits the 19.25″ barrel length version. Middle to late 2023 produced 1100Z barrels were increased in length to 22.25″ eliminating the free space that used to allow a spring and baffles to fit.
    Help quiet down your Barra 1100z with our custom-fit HP 5-piece Baffle Stak and tension spring. There are two different-sized baffles to help eliminate patterned harmonics in the air stream.

     

     

    Select options
  • HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00
    HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00

    Part fits either the original Gauntlet or the Gauntlet 2

    You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

    Air Stripper comes with o-ring and silicone grease for installation.

    Select options
  • HP Barrel Band For Umarex Gauntlet
    $30.00 – $35.00

    Fits Gauntlet 1, 2 even the .30 Cal

    HP Barrel Band For Umarex Gauntlet
    $30.00 – $35.00

    Available in the classic Picatinny rail version or the 15mm thick rail less version.

    Fits both the original Gauntlet as well as the Gauntlet 2 including the G30 or G30SL!

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options
  • Sold out!
    Notos Expanded Magazine
    $30.00

    Haji-Notos Mag 11 rounds

    Notos Expanded Magazine
    $30.00
    Introducing the Haji-Notos 11 Shot Expanded Magazine!

    This is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

    Please note that our design loads from the right.

    Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

    The Haji-Notos magazine works with a red-dot or optic but does not work with Umarex fixed fiber optic sights.

     

    Read more
  • HP Gauntlet, Mini Mag
    $33.00

    Gauntlet 1 or Gauntlet 2 Mini Magazine

    HP Gauntlet, Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .25 = 11 shots
    • The magazine height is 40.90mm (1.610″ )

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP MROD Mini Mag
    $33.00

    Benjamin Marauder Mini Magazine

    HP MROD Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but is slightly shorter to allow the magazine to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Benjamin Marauder in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots between reloads. The magazine’s operation is smoother and offers a more reliable chambering of rounds.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • Easy-to-load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = Holds 13 shots (Stock Mag Holds 10 Shots)
    • .25 = Holds 11 shots (Stock Mag Holds 8 Shots)
    • The magazine height is 40.90mm (1.610″ a little less than 1-5/8″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP Avenger Mini Mag
    $33.00

    Avenger/Origin Mini Magazine

    HP Avenger Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .25 = 11 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto’s Beeman 1358 Mini Magazine
    $33.00

    Beeman 1358 Mini Magazine

    Hajimoto’s Beeman 1358 Mini Magazine
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .177 = 18 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sold out!
    Avenger Shroud Adapter
    $33.95
    Avenger Shroud Adapter
    $33.95

    The Newer Avengers use a threaded plastic shroud adapter which the shroud screws onto. The stock plastic mount is weak and prone to breaking if over tightened which means you cannot tighten it down adequately. This can lead to the shroud being able to move around a bit which will affect accuracy. This high-quality adapter will fix those issues and create a more consistent shooting airgun. Or just replace a broken or damaged shroud mount.

    The AE Swede adapter is CNC machined from 7075 high-strength aluminum part and utilizes two set screws. You can clock the piece however you want and do not need the stock barrel detents to lock in place. This helps when holes have been drilled in the shroud at the rear for extra sound deadening ability.

    Read more
  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sold out!
    Artemis PP750 1/2 x 20 #A68
    $35.00
    Artemis PP750 1/2 x 20 #A68
    $35.00

    Fits the Artemis PP750 PCP

    This part is designed and manufactured by DonnyFL

    Read more
  • Sale!
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.

    Stak Pak for Hatsan QE shrouds (.357 & .457 Not Included)

    Simply unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the very first full-sized baffle and then arrange the stack as shown in the packaging.

    A ten-piece kit that directly replaces the two hair curler style baffles that come inside any Hatsan that has a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove both noise and turbulence in the air stream. The baffle stack rides on a high tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357 & .457 models.

    The end result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.

    Installation video is listed in the DESCRIPTION section below

     

    Select options
  • HP Avenger Exp Mag
    $35.00 – $40.00

    Fits both Avenger and Origin

    HP Avenger Exp Mag
    $35.00 – $40.00

    New new redesigned HP 2.0 magnetic lid design is available for the .22 Caliber!

    Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177,  .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • New magnetic lid design available for .22.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of all calibers is 50.25MM (1.978″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP MROD Exp Mag
    $35.00

    The MROD, Expanded Magazine

    HP MROD Exp Mag
    $35.00

    Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    Features

    • Redesigned magnetic lid design available in .22 only for now.
    • Drop in loading.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock mag. The magazine height is 50.25MM (1.978″)
    • .22 = 17 shots which is an increase of 70% more shots over the stock mag. The magazine height is 50.25MM (1.978″)
    • .25 = 14 shots which is an increase of  almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Airacuda & Airacuda Max .22/.25

    Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
    • The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
    • Available in right-side loading for the .22 caliber soon to come for the .25 cal.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • $35.00

    Replacement end caps

    Emperor/Ronin End Caps
    $35.00

    THIS IS AN AIRGUN ONLY PART

    Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

    Select options
  • Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00

    Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

    This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

    If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

    This part is designed and manufactured by DonnyFL

    Select options
  • $40.00

    1/2 x 20 UNF Adapter for Akela/Kratos

    Benjamin Akela/Kratos 1/2 x 20 Adapter A8
    $40.00

    Fits the Benjamin Akela and Kratos PCP’s

    This part is designed and manufactured by DonnyFL

    Select options
  • HP Strip Stak Pak for Akela/Kratos
    $40.00

    Akela/Kratos Strip Stak Pak

    HP Strip Stak Pak for Akela/Kratos
    $40.00

    INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

    Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
    A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
    The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.     

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
    Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

    Air Stripper comes with o-ring and silicone grease for installation.

     

     

    Select options
  • Sold out!
    Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
    $45.00
    Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
    $45.00

    Specifically for the AV Avenger

    Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

    This part is designed and manufactured by DonnyFL

    Read more
  • HP Strip Stak Pak for PP750
    $45.00
    HP Strip Stak Pak for PP750
    $45.00

    Strip Stak Pak for the Artemis PP750
    A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
    Air Stripper comes with o-ring and silicone grease for installation.  Not available for Canada

    Select options
  • Umarex Origin 1/2 x 20 Adapter #A70
    $45.00
    Umarex Origin 1/2 x 20 Adapter #A70
    $45.00

    Specifically for the Umarex Origin

    Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

    This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.

    This part is designed and manufactured by DonnyFL

    Select options
  • Beeman Underlever 1357 | 1358 Adapter #A86
    $45.00
    Beeman Underlever 1357 | 1358 Adapter #A86
    $45.00

    Specifically for the Beeman 1357 / 1358

    This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.

    This part is designed and manufactured by DonnyFL

    Select options
  • HP Strip Stak Pak for Avenger
    $47.00

    Air Stripper, Tension Spring and Baffle Stack

    HP Strip Stak Pak for Avenger
    $47.00

    UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Avenger

    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options
  • HP Strip Stak Pak for Origin
    $47.00

    Origin .22/.25

    HP Strip Stak Pak for Origin
    $47.00

    NEW ENHANCED DESIGN

    UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Umarex Origin
    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options
  • JTS Airacuda Adapter #A115
    $50.00

    DonnyFL A115 JTS Adapter

    JTS Airacuda Adapter #A115
    $50.00

    Specifically for the Airacuda Standard or the Max in any Caliber (.22, .25, or .30)

    Because this adapter was made to fit both the Standard and Max versions of the AiraCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not affect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design with this flexibility to overcome the challenges of this airgun’s shroud design so that moderators could be used.

    Key Features:

    • Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
    • Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.

    This part is designed and manufactured by DonnyFL

    Select options
  • $55.00

    11.4cc plenum expansion for Avenger

    Doux – Avenger Power Plenum
    $55.00

    AVENGER/LEVIATHAN POWER PLENUM:

    • SIZE: 11.4cc
    • STACKABLE
    • BLACK ANODIZED WITH MATT BLACK GUN COATING
    • TYPICAL PERFORMANCE INCREASE IS AROUND 20FT/S WITH NO OTHER MODIFICATIONS.

    THIS PLENUM IS NOT DESIGNED TO NOT FIT THE BULL PUP VERSION

    INSTALLATION CAN BE MADE USING TYPICAL SNAP RING PLIERS

    MADE IN SOUTH AFRICA

    Installation video below

    Select options
  • Saber Tactical 55mm Clamp
    $59.99

    Clamp with Pic rail

    Saber Tactical 55mm Clamp
    $59.99

    If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

    Fits perfectly for Umarex Gauntlets Stock tanks.

    This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

    Select options
  • Sold out!
    $60.00
    DISCONTINUED
    HP Strip Stak Pak for Evanix Air Speed
    $60.00

    Evanix Air Speed Air Stripper and Baffle Stack _
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options
  • Emperor/Ronin Extender
    $60.00

    V3 6.26 inch Extension

    Emperor/Ronin Extender
    $60.00

    THIS IS AN AIRGUN ONLY PART

     

    Is the 10.5 inch Emperor v3 still too loud for you? If so add this 6.25 inch expansion chamber to the rear of the Emperor to make it even quieter. This increases the air volume that gets captured inside the suppressor. Works with the latest version of the Ronin as well. If it has the grooves in the front cap, it’s the latest model.

    Select options
  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options
  • Sale!
    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $85.00

    Gauntlet STK

    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $85.00

    THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
    IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

    The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

    Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1) 

    For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
    BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

    CONTENTS:

    • Adjuster Plug Assembly.
    • Smaller, Lighter Composite Poppet.
    • Hajimoto Hammer Spring (Black Long)
    • Lighter Trigger Spring (Bright Small).
    • 5/64″ Allen Wrench For Adjusting Power.

    The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
    Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

    Be sure to follow my written instructions in the document below.
    Use the video to install but follow these written instructions to adjust and tune the STK:

    Written Detailed Tuning Instructions for the STK

    More details below.
    Always read the content below because any revised instructions, video, photos, or other links will be there.

    Select options
  • FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00
    FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00

    FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

    You will want these rings if you are planning on using my Expanded Magazine.

    Select options
  • Sold out!
    AE Swede Avenger Bottle Adapter
    $88.00 – $325.00

    Allows for a dual Reg Setup

    AE Swede Avenger Bottle Adapter
    $88.00 – $325.00

    This is AE Swede’s bottle adapter and plug that allows the user to run dual regulators.
    Here is where you will find the reg you need. Just select 3000PSI output.

    Select options
  • $99.00

    Tanto 1.22 x 5 inches

    Tanto 1.22 x 5 inches
    $99.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Real 2 Stage Trigger for the Gauntlet
    $110.00

    Fits the G1, G2 or G30

    Real 2 Stage Trigger for the Gauntlet
    $110.00

    Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.

    • The Trigger Is Stainless Steel 17-4 Through Hardened
    • The Trigger Shoe Is Aluminum 6061-T6

    Please see the installation video below for more details.

    Super Tune Kit Users
    You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.

    Select options
  • Sale!
    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    With or Without Cylinder

    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    Convert your Air Venturi Avenger into a bottle PCP!

    • Adapter Threaded for M18 x 1.5 Air Cylinder.
    • Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
    • All Stainless Steel Construction.

    Made in South Africa

     

    Installation video below:

    Select options
  • FX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Tatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • $144.95

    Ninja X Reg Custom Output Regulator up to 3100psi

    Ninja High Pressure 5/8″-18UNF Custom Output Regulator
    $144.95

    5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

    We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

    You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

    This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber

    Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
    Select options
  • Ninja Pro V3 Regulator 5/8″ Thread
    $148.00
    NEW MODEL

    Pro V3 for 3K and 4.5K Cylinders

    Ninja Pro V3 Regulator 5/8″ Thread
    $148.00

    The All New Hajimoto Pro V3 in 5/8”-18UNF Thread with Stainless Steel Cap Threads

    Ninja's Pro V3 with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
    Select options
  • Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    5/8″-18UNF Threaded Unit

    Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
    Say goodbye to only one fixed output pressure!
    The user has an 800PSI adjustment swing!
    Requires minor forestock modification.
    The regulator thread is 5/8-18UNF

    The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
    If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

    How to read the below configurations
    Example: Flex Reg .22 | 4500/1600 to 2400 psi
    Flex Reg .22 = Regulator Type for .22 caliber
    4500/ = The bottle’s maximum fill pressure
    1600 to 2400 psi = The output range of the Flex Reg

    Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex Reg .177/.22 |3000/700 to 1500PSI

    Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex Reg .25 | 3000/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
    Stock .22 | 4500/1900PSI Regulator
    Flex Reg .22 | 4500/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
    Stock .25 | 4500/2100PSI Regulator
    Flex Reg .25 | 4500/1600 to 2400PSI

    Flex Reg Configuration For G30 Cal
    Stock .30 | 4500/2800PSI Regulator
    Flex Reg .30 | 4500/2100 to 3100PSI

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Select options
  • $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Ninja High Pressure Metric M18 Custom Output
    $154.95 – $155.00
    Ninja High Pressure Metric M18 Custom Output
    $154.95 – $155.00

    The Hajimoto M18*1.5 Thread can be used on 3000PSI bottles as well.

    The Bonnet is Steel not aluminum for maximum strength and low wear.

    This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

    We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

    You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

    Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
    Select options
  • Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator
    $155.00
    NEW MODEL

    PRO V3 REG WITH 13CI TANK

    Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator
    $155.00 

    Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

    This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator
    Select options
  • Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Flex Reg on 13ci Aluminum 3K

    Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Introducing a Hajimoto Productions Exclusive offer!

    13ci/213cc/.21L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1600 to 2400PSI

    Installs on the Gauntlet with minor tank shroud modifications.

    A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options
  • Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
    $173.00 – $175.00
    NEW MODEL

    PRO V3 ON 22ci 3K Cylinder

    Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
    $173.00 – $175.00

    Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded  36o° rotational Cap.
    Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

    This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

    PRESSURE – STOCK AND RECOMMENDED
    Stock .177/.22 | 22ci/3000/1100PSI Regulator
    Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

    Stock .25 | 22ci/3000/1900PSI Regulator
    Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

    This setup is for the original Umarex Gauntlet 1 with the Black stock.
    A complete regulator rebuild kit is included!

    NINJA REGULATORS ARE MADE IN THE USA!

    Select options
  • Sold out!
    Fat Boy 2 x 4.25 inches
    $175.00

    2 x 4.25 inches Fatboy 2.0

    Fat Boy 2 x 4.25 inches
    $175.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    2 x 4.25 inches Fatboy 2.0

    Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.

    Features:

    • Compatible with .177 to .30 calibers 
    • Includes 3 interchangeable air strippers
    • Redesigned 1/2 x 20 rear cap for easy gripping
    • Can be used with the 6.25 inch extender for more hush power
    • Measure 4.25 inches long by 2 inches in diameter
    • Weighs only 6.7 oz
    Read more
  • Shogun 1.6 x 8 inches
    $185.00
    Shogun 1.6 x 8 inches
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    Select options
  • Ronin 2 x 6.25 inch
    $185.00
    Ronin 2 x 6.25 inch
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.

    The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.

    We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.

    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
    The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs

    If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.

    Select options
  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options
  • Sale!
    Original price was: $220.00.Current price is: $195.00.

    Installation of our Sidelever on G2 or G1

    Gauntlet Sidelever Install
    Original price was: $220.00.Current price is: $195.00.

    This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

    Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

    There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

    The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

    Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

    One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

    See below for detailed shipping instructions and preparation videos.

     

    Select options
  • Sale!
    0.50L Carbon Fiber Tank 4500PSI
    Original price was: $260.00.Current price is: $220.00.

    0.5L/500cc CE Certified CF Tank

    0.50L Carbon Fiber Tank 4500PSI
    Original price was: $260.00.Current price is: $220.00.

    Half a liter of air, right here!

    0.5L/500cc CE Certified CF Tank
    Perfect fit for your custom build.

    M18x1.5 Threaded

    This is the same bottle we use on the TacVenger builds we offer.

     

    Select options
  • $239.99

    DonnyFL EMPEROR V3 Moderator

    Emperor 2 x 11 inch
    $239.99

    THIS IS AN AIRGUN ONLY PART

     

    Introducing the largest DonnyFL suppressor catered to the big bore guns.

    Overall length 11 inches and weighs in at 1 lb.

    This thing is built like a tank to tame those power hungry shooters.

    Select options
  • Sale!
    FX Pocket Chronograph Mini V2
    Original price was: $279.00.Current price is: $249.00.
    FX Pocket Chronograph Mini V2
    Original price was: $279.00.Current price is: $249.00.

    FX Pocket Chronograph v2

    The original FX Chronograph changed airguns by providing the
    most important tool a modern shooter must have, in a compact, portable unit. Now FX Airguns is pleased to introduce the even smaller and improved FX Pocket Chronograph v2.

    The v2 Pocket Chronograph is more pocket sized than ever at just
    under the size of a 2” cube. It now has an internal battery that is recharged through an included USB-C cord. Multiple mounts are also included that allow the shooter to attach the chronograph to their rifle in multiple ways.

    The chronograph itself can be used for more than just airguns. Any
    projectile traveling under 1250 FPS can be accurately measured. This includes subsonic rifles, pistols, CO2 air rifles, paintball, and more. Since the unit uses radar technology, the Pocket Chronograph can be used in any weather condition without external accessories.

    The setup is the same as the older version. To learn how to use it, follow the link here to watch the tutorial video.

    All/any warranties are manufacturer provided.

    Select options
  • Ninja Reg on 18ci Carbon Fiber Bottle
    $274.00

    4.5K PSI Ninja Reg on a 18ci/295cc/.29L CE Certified CF Tank

    Ninja Reg on 18ci Carbon Fiber Bottle
    $274.00

    Direct replacement with no modifications required for the Umarex Gauntlet 2!
    18ci/295cc/.29L 4500 PSI Carbon Fiber Bottle

    Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

    Includes Ninja’s HP regulator.
    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure.  This 4500 PSI carbon fiber bottle is 18ci and is absolutely gorgeous on the Gauntlet 1 or Gauntlet 2.

    The Gauntlet 1 will need to have its tank shroud inside diameter increased to allow the foregrip/tank cover to side over this carbon fiber tank.

    Operating Pressure Recommendations

    Gauntlet 1:
     .177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
    .25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.


    Gauntlet 2:
     .22 Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.
    .25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2300PSI.

    NINJA REGULATORS ARE MADE IN THE USA!

    Select options
  • Sale!
    Original price was: $390.00.Current price is: $280.00.

    0.7L/700cc CE Certified CF Tank

    0.70L Carbon Fiber Tank 4500PSI
    Original price was: $390.00.Current price is: $280.00.

    0.7L/700cc CE Certified CF Tank
    Perfect fit for your custom build.

    M18x1.5 Threaded

    If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.

    Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE

     

     

    Select options
  • Ninja Pro V3 Reg on 22.5ci Carbon Fiber Bottle
    $294.00
    NEW MODEL

    PRO V3 Reg on a 22.5ci/370cc/.37L CE Certified CF Tank

    Ninja Pro V3 Reg on 22.5ci Carbon Fiber Bottle
    $294.00

    ALL NEW!

    Direct replacement with no modifications required for the Umarex Gauntlet 2 and Gauntlet 30 Cal!
    22.5ci/370cc/.37L CE Certified CF Tank
    Shaves off 1/2 a pound of weight compared to the 4500psi stock aluminum tank.
    A complete regulator rebuild kit is included!

    Includes the New Hajimoto Pro V3 regulator with Stainless Steel rotational bonnet.
    Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 22.5ci and is absolutely gorgeous on the Gauntlet series of PCP.

    The Gauntlet 1 will need to have its tank shroud inside diameter increased slightly to allow the foregrip/tank cover to side over this carbon fiber tank or simply remove the tank shroud.

    Operating Pressure Recommendations

    Gauntlet 1:
     .177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
    .25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2300PSI.


    Gauntlet 2:
     .22 Stock operating pressure 1900PSI Max Recommended pressure is 2150PSI.
    .25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2400PSI.

    NINJA REGULATORS ARE MADE IN THE USA!

    Select options
  • Sold out!
    Power Flex Combo 18.3ci Carbon Fiber 4500PSI
    Original price was: $339.00.Current price is: $295.00.

    Flex Reg on 18ci/295cc/.29L CE Certified CF Tank

    Power Flex Combo 18.3ci Carbon Fiber 4500PSI
    Original price was: $339.00.Current price is: $295.00.

    Introducing a Hajimoto Productions Exclusive offering!
    18ci/295cc/.29L CE Certified CF Tank

    Fits the Gauntlet 2 without any modifications.

    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. An 18.3ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet! The massive volume of air afforded you is mind-blowing.

    The diameter of the tank is 54-55mm across so a modification to the forearm is required if you desire to continue to use the Gauntlets tank shroud. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    Gauntlet Bottle Shroud Mod

    Please see the examples provided in the accompanying photos.

    The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. Please be careful if you have accessories on any of the MLok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!.

    The cylinder’s outside dimension is slightly larger than the stock aluminum tank so my standard HP Barrel Band does not fit. You will need to use the HP Barrel Band CFT version

    
Regulator is Made in the USA!
The Power Flex Combo is set to either of the two Gauntlet configurations.
Simply select the proper configuration.

Power Flex Combo Configuration For .177/.22 Cal
Flex Reg set to 700 to 1500PSI
    Power Flex Combo Configuration For .25 Cal
Flex Reg set to 1600 to 2400PSI
    DO NOT USE Power Flex Combo Configuration For .25 CONFIG on .177 or .22
they are not capable of handling the pressures.
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
    Select options
  • Flex Reg RTI Version & Tank
    $310.00 – $350.00

    500cc CF Tank with Adjustable Reg

    Flex Reg RTI Version & Tank
    $310.00 – $350.00

    Flex Reg designed and configured specifically for RTI PCP’S such as Prophet, Priest, & Priest 2
    This Flex Reg comes paired with a brand-new Carbon fiber 4500PSI tank. The regulator is externally adjustable and has an effective adjustable range of 900PSI (62bar). 

    Using the slider you select what the maximum output will be and because the regulator has the ability to adjust, you can reduce that maximum output pressure down as much as 900PSI (62bar). You can of course set the pressure anywhere along that 900PSI (62bar) range to suit your tuning requirements. The regulator will not have a pin or ball seal in the bonnet. The tank cannot be removed while under pressure and must be degassed.

    Because of practical limitations, regulator max output will be +/- 50PSI (3.5bar) within the requested maximum output.

    Comes with a spanner wrench for adjusting the output on the fly.

    ** This regulator is 5/8″-18UNF threaded and will not fit M18 threaded bottles. This configured Reg is not sold separately.

     

    Select options
  • Sale!
    Power Flex Combo 22.5ci Carbon Fiber 4500PSI
    Original price was: $375.00.Current price is: $330.00.

    Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank

    Power Flex Combo 22.5ci Carbon Fiber 4500PSI
    Original price was: $375.00.Current price is: $330.00.

    Introducing a Hajimoto Productions Exclusive offer!

    22.5ci/370cc/.37L CE Certified CF Tank
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder.  Installation video at the bottom of the page.

    The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.

    The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 75PSI to the requested output.

    Select options
  • Sale!
    Power Flex Combo 30ci/.5L Carbon Fiber 4500PSI
    $349.00 – $360.00

    Flex reg and 30ci/500cc/.5L CE Certified CF Tank

    Power Flex Combo 30ci/.5L Carbon Fiber 4500PSI
    $349.00 – $360.00

    Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation.

    Introducing a Hajimoto Productions Exclusive offer!

    30ci/500cc/.5L CE Certified CF Tank
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

     

     

    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This includes a 30ci/500cc/.5L CE Certified 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 900PSI!

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

    Select options
  • Sale!
    Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
    $360.00 – $419.00

    Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank

    Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
    $360.00 – $419.00

    Awesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!

    Ninja Paintball High Pressure Regulator mounted on a quality 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.

    We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI

    All custom built pressure units will have a +/- 75 psi tolerance.

    Select options
  • Sale!
    Power 700 Combo
    Original price was: $460.00.Current price is: $419.00.

    HP M18 Reg and 700cc/.7L CE Certified CF Tank

    Power 700 Combo
    Original price was: $460.00.Current price is: $419.00.

    The Power 700 Combo is a 4500PSI Ninja High-Pressure M18 reg mounted on a 0.7L/700cc Carbon Fiber 4500PSI Cylinder.

    The High-Pressure reg paired with the 700cc cylinder means shots galore!

    Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation. Use the Notes if you are looking for a lower PSI than 2800PSI as we can build the reg to ANY PSI 3100PSI and lower.

    Consider adding our Barrel Band made for the Power 700 Combo!

    Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

    Select options
  • Sale!
    Gauntlet 30 SERVICE Builder
    $30 to $1000
    Gauntlet 30 SERVICE Builder
    $30 to $1000

     

    Hajimoto Productions Gauntlet .30 Service Selector/Builder

    Important Information:
    This builder is used for G30 OWNERS who understand that they will be sending in their G30 to have modifications performed. If you are looking to purchase any of the parts listed below, you will want to leave SERVICE and use the SEARCH for the PART you want. 

    So you didn’t know we offered turnkey G30 packages? So you already own a G30 and wish you could get were able to have some of the service modifications that are available on some of our Airgun Packages? Well, we got you covered with this G30 specific Service Builder.

    This menu system allows you to select what you want or what you don’t want and when you’re done you have a complete turnkey service request for your Gauntlet .30 Caliber!

     

    • The Gauntlet 30 Caliber
      Shortly after your order is received, we will respond with the shipping information as well as what your shipping label needs to contain.

    The shipping you pay at checkout is only a placeholder and the actual shipping fees associated with this order will be adjusted so that you only pay what is required once we receive your package and calculate the actual size and weight of your package. In some cases, you will be required to pay more and in others, you will receive a refund.

    Please note that this service is exempt from any discount campaigns.

     

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.

BACK FROM RMAC

PLEASE BE PATIENT WITH US

AS WE GET CAUGHT UP

 

This will close in 20 seconds