Hajimoto’s Gauntlet Expanded Magazine

For Gauntlet .177, .22, .25 and .30 Calibers
(1 customer review)

For Gauntlet .177, .22, .25 and .30 Calibers

$35.00 – $40.00

Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

Features

  • An easy to load NO LID design.
  • No pre-winding is necessary.
  • Easy partial fill design.
  • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
  • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
  • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
  • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
  • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
  • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

Clear
SKU: HPGNTHCMAG Categories: , , , , , , Tags: , , ,

Description

Please be sure to measure your free area or clearance between the bottom of your scope to the top of the magazine well.

The height for the .177, .22, & .25 magazine is 50.25MM (1.978") and the magazine height for the .30 is 46.20MM (1.820")

and the photo below shows the magazine in a Umarex Gauntlet 2 with a typical set of fixed scope rings under a WestHunter 4-16×44 FFP Scope

If you do not have adjustable rings or if the expanded mag is too tall, consider our Mini mag which is shorter but still holds more rounds than the stock mag.


HP Magazine installed on a G2 with typical fixed scope rings.

Additional information

Weight 1.1 oz
Dimensions 2 × 2 × 1 in
Generation

Gauntlet 1, Gauntlet 2
Caliber

, , ,

Color

Black, Tan & Black, Red & Black, Green & Black

1 review for Hajimoto’s Gauntlet Expanded Magazine

  1. doyleliz40 (verified owner) –

    I’m sorry to say $45 with shipping is to much for an additional 4 shots I could have gotten almost 2 regular mags also the way it is loaded is touted as a plus but I prefer the stock mags way. The 3d printing is a little crude but seems durable enough but needed a little touch up on some rough edges I’m not displeased enough to send it back but I don’t think I’ll be ordering another. I’m giving the rating for the aforementioned reasons. But will consider changing it after I’ve run a few hundred slugs through it.

Add a review

You may also like…

  • $79.00
    FX No Limit Scope Rings 1″, 30mm and 34mm – 30mm/Picatinny
    $79.00

    Tube/Rail Option: 30mm/Picatinny

    Add to cart
  • Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision INS Mount

    Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spears screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Select options
  • $79.00
    FX No Limit Scope Rings 1″, 30mm and 34mm – 30mm/Dovetail
    $79.00

    Tube/Rail Option: 30mm/Dovetail

    Add to cart

Related products

  • HP Barrel Band For Umarex Gauntlet
    $30.00 – $35.00

    Fits Gauntlet 1, 2 even the .30 Cal

    HP Barrel Band For Umarex Gauntlet
    $30.00 – $35.00

    Available in the classic Picatinny rail version or the 15mm thick rail less version.

    Fits both the original Gauntlet as well as the Gauntlet 2 including the G30 or G30SL!

    Select options
  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.