Gauntlet Sidelever Install

Installation of our Sidelever on G2 or G1
Sale!

Installation of our Sidelever on G2 or G1

Original price was: $220.00.Current price is: $195.00.

This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

See below for detailed shipping instructions and preparation videos.

 

Clear
SKU: HPSL Categories: , , , , , , Tags: , , ,

Description

The sidelever cocking system is a CNC 6061 aluminum assembly with a hard anodized finish that comes in two different configurations. The Sidelever system is no longer being offered for .20 caliber variants.

  • The Gauntlet 1 
    All black stock .177, .22 or .25
    Prep Video
  • The Gauntlet 2
    Sand Tan color stock .22 or .25 caliber
    Prep Video
  • Shortly after your order is received, we will respond with the shipping information as well as what  your shipping label needs to contain. Please note that this service is exempt from any discount campaigns.
Ship us your action

Watch the proper PREP VIDEO above for your version of Gauntlet which shows you exactly what you need to do to prep your Gauntlets action so we perform the upgrade.

The shipping associated with this service is based on a USPS Medium Flate Rate Box so any items received that are larger than that would require a shipping price adjustment prior to shipping the action back to you.

The below video demonstrates our sidelever cocking system in action on Gauntlet 1,  Gauntlet 2 .177/.22 OR .25 Caliber PCPs.

Additional information

Weight 48 oz
Dimensions 12 × 4 × 4 in
Generation

Gauntlet 1, Gauntlet 2

Reviews

There are no reviews yet.

Be the first to review “Gauntlet Sidelever Install”

Related products

  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options
  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible wit the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options
  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.