Accessories

Air Strippers and Baffles (11)
Avenger Mods and Enhancements (24)
Barrel Bands (4)
Chronographs (4)
Gauntlet Tuning Items (31)
HubenPower (1)
Magazines (11)
Regulator, Tanks & Parts (58)
50 to 250
For either G30 or G30SL
G30 Barrel Service Lab
50 to 250
Select options
$4.00
Ninja fill port o’ring
Fill Port O’ring Fits Ninja
$4.00

5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators

Select options
$7.00
Gauntlet Barrel Baffle Spring
Umarex Gauntlet Baffle Spring
$7.00

Umarex Gauntlet .177, .22, or .25 Baffle Spring.

Part is not compatible with Gauntlet .30 Caliber

This is the spring that lives in your Gauntlets Shroud. It is required to keep the air stripper on the end of the barrel and allows the baffle or baffle stack to live under tension.

Select options
Sold out!
Original price was: $11.00.Current price is: $7.50.
clamps onto 20mm Pic Rail
Picatinny Rail Anti-cant level
Original price was: $11.00.Current price is: $7.50.

Bubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount

Read more
$8.00
Tank to PCP O-rings (10 Pak)
$8.00

10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT

Select options
$9.95
Burst Disk Two Pack
Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
$9.95
- 1.8k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 3k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 5k burst disk is used as the high-pressure burst disk on 3k tanks
- 7.5k burst disk is used as the high-pressure burst disk on 4.5k tanks
Actual burst disk finish may be Black, or Bright depending on availability. The Flex Reg Above is an example of 5K and 7.4K Burst Disks.

The Flex Reg Above is an example of 5K and 7.5K Burst Disks.
Select options
Sale!
Original price was: $14.99.Current price is: $9.99.
QD PORT SLING SWIVEL AND BASE
Original price was: $14.99.Current price is: $9.99.

QD Sling Mount Sling Swivel Quick Detach Release Push Button QD Sling Swivels for MLOK SLOTS.

Quick Disconnect

Select options
Sale!
$10.99 – $99.99
Dead Center Pellets
JTS Dead Center Pellets
$10.99 – $99.99
JTS Dead Center Pellets are the result of 2 years of development resulting in a premium airgun pellet line that utilizes the latest manufacturing equipment and processes to ensure quality and consistency. JTS engineers used aerodynamic principles when designing these pellets to ensure that every shot you make is accurate.

Even the screw-off lid on the tin is designed with air gunners in mind. The pellets are packed in each tin with foam on top and on the bottom to help keep these old boys pristine when you are ready to load them.

Best shipping value is realized when you buy in four sleeve quantities.

Available in:
- .22 caliber 18.1 gr 250 pcs per tin
- .25 caliber 25.3 gr 150 pcs per tin.
View the video below to see these pellets in action from our TacVenger Bullpup bottle gun at 50 yards!
Select options
$11.00 – $20.00
For G1 G2 & G30 Variants
Umarex Gauntlet Tune O-ring Kit
$11.00 – $20.00
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

Now includes two of my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

Some of the NO-Ring seals have the leading edge precision ground.

These tapered / precision ground types need to be installed as shown below

(Images are of the .30 caliber NO RING)

You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
Select options
$11.00
A2 Pistol Grip
GRIP
$11.00

A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

Material: Dupont Zytel 30% glass filled nylon

Made in the USA

Select options
$11.00 – $22.00
Nate Chrony Custom Adapters
Nate Chrony Custom Adapters
$11.00 – $22.00

Airgun Specific Custom Adapters

Select options
$12.00
Battery for Firefly 8SE Camera
$12.00

Description:
1.This Li-ion Battery is designed for the Hawkeye Firefly 8S 8SE Camera

Select options
$12.50
PatchWorm Pocket Field Kit
$12.50

The PatchWorm Pocket Field Kit (PFK) is made entirely of durable nylon and is designed to pull a clean patch with every stroke. It’s a far more refined alternative to pulling a dirty snake through your barrel…
This universal cleaning kit is so compact, it fits comfortably in a shirt pocket. Standard rifle rods are 36″ long from tip to head (not including the extra “tail” for easy extraction should the rod get stuck for any reason) and will clean up to 28″ barrels.
The rifle version has 8 color-coded cleaning heads:

.20 cal (green) – permanently attached
.22 cal (white)
.243 – .284 cal (black)
.308 – .348 cal (red)
.355 – .40 cal (purple)
.41 – .45 cal (orange)
.50 – .54 cal (blue)
12 gauge (yellow)

The PFK comes with dozens of wet (with Ballistol Sportsman’s Oil) and dry patches (7/8″ diameter), suitable for all bore sizes through .35 caliber. Larger 1 1/4″ diameter patches are available separately for the larger calibers. Reusable flip-lid containers are included for convenient storage.

Fouling is most easily removed while the barrel is still warm. Slide on a cleaning head, pierce 1 wet patch, feed into the chamber, and pull straight from the muzzle. Flip patch, pull again, remove the wet patch. Pierce 1 dry patch, repeat. Where a range of calibers is specified for a cleaning head, a second patch can be added (stacked on top of the first) for the larger caliber to achieve a tight finishing stroke.

Select options
Sale!
Original price was: $18.00.Current price is: $12.50.
Open Door for Firefly 8SE Case
Original price was: $18.00.Current price is: $12.50.

Description:
This skeletonized rear door allows you to use your touch screen without opening the case.

Direct replacement no modifications required.

It is recommended that you remove the white silicone gasket on the door so it is easier to close and does not impart too much stress on the hinges or the latch assembly. After all, we are not trying to achieve a waterproof assembly anyway.

*Firefly camera is not included and is shown for reference.

Select options
$13.00
Fits Notos / HajiNotos
NOTOS FIBER OPTIC SIGHTS
$13.00
The Umarex Notos was designed to be flexible to your shooting needs. The Notos has plenty of accessory rail on the top side of the rifle allowing shooters to install the optic of their choice or, a set of fixed sights. The high-contrast Fiber Optic elements pick up plenty of available light for quick accurate shooting in all lighting conditions. These Fiber Optic sights can be installed in just minutes.
Umarex Notos Fiber Optic Sights

Front and Rear Fiber Optic Sights

Compatible with Umarex Notos PCP Airgun

NOT COMPATIBLE WITH HAJIMOTO MAGAZINE FOR THE NOTOS
Select options
Sale!
Original price was: $17.95.Current price is: $14.00.
Stock Umarex Magazine
Umarex Gauntlet Rotary Magazine
Original price was: $17.95.Current price is: $14.00.
The Gauntlet Rotary Magazine advances each pellet with the operation of the bolt on the Umarex Gauntlet PCP air rifle.

Features
- .177 = 12 shots
- .22 = 10 shots
- .25 = 8 shots
- .30 = 7 shots
Select options
$14.00
Aluminum Latch for Firefly Case
$14.00

Aluminum Latch Buckle for camera case

Description:
A direct replacement camera case latch buckle but made from aluminum.

This is my aluminum CNC’d camera case latch replacement. Eventually, the lightweight plastic latch that comes on the Firefly Camera case fails and that means your camera is not held in place and you are not able to record your shots through your scope camera assembly. This part requires your original wire hinge piece which typically never breaks.

CLEAR CAMERA CASE NOT INCLUDED. LATCH ONLY

Select options
Sold out!
$14.00
Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00

Zero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.

Read more
$14.00 – $18.00
Adapter for NateChrony V2
NateChrony Variable Adapter
$14.00 – $18.00

A variable adapter for barrels that are not threaded. The variable adapter is simply pushed onto the end of the barrel & tightened in place with the thumb screws.
The bore & outer barrel MUST be concentric! Otherwise damage or injury could occur.

Select the maximum outer diameter of the barrel from the options. The adapters can be adjusted from its maximum diameter down to the minimum diameter by changing the internal inserts.

The barrel MUST make contact at FOUR points, as close as possible to the top & bottom of the barrel. If the adapter is making contact at the middle of the barrel mis-alignment can occur.

Thumb screws are aluminum & supplied with either knurled or printed tabs.

Price is for 1 adapter, with 1 set of screws.

Select options
$14.50 – $34.00
Battery Charger for Firefly 8SE
$14.50 – $34.00

Description:
Dual Battery Quick Charger for Firefly 8SE Camera Batteries.

Available in 3 configurations with or without extra camera batteries.

Use a 5V 2A output USB port to charge 2 batteries.

Select options
$15.00 – $70.00
Bipod and Picatinny Rail
$15.00 – $70.00

Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

Select options
$15.00
Clamp for bipod mount
Beeman 1358 / 1357 Bipod Clamp
$15.00

A quick and simple all-aluminum clamp that allows Beeman 1357/1358 owners a way to mount a bipod.

Select options
$15.00
NOTOS Barrel O-Rings
NOTOS Barrel O-rings
$15.00

Umarex NOTOS Barrel O-Rings

This kit provides you with six barrel o-rings.

If you have removed your barrel before, you will quickly learn that scalping the rings on the breach block assembly is easy.

Select options
Sold out!
$17.00
DISCONTINUED
Ninja Magna Cap Fill Nipple Cover – BLACK
$17.00

Patented Magnetic design Lightweight Aluminum Helps to keep the dirt out!

MADE IN THE USA!!!!

Read more
$18.50
Umarex Gauntlet Regulator Shim Pak
$18.50
Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
  (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.

DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

If you rapid fill, there is a good chance you will pop your burst disc.
Select options
$19.00
Swagalicous Hajimoto Productions Flat Bill Cap
Hajimoto Productions Flat Brim Cap
$19.00
Hajimoto Logo is located on the wearer’s left just as shown here:
- Solid Color or Camo
- 65% Acrylic, 35% Terylene
- Flat Bill, Hip Hop Style.
- Plastic Adjustable Snapback, One Size fits Most Head Sizes.
- 6 Panels
Select options
$20.00
HP Baffle Stack For Umarex Gauntlet
Rated 5.00 out of 5
$20.00

Part fits either the original Gauntlet or the Gauntlet 2

THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

Select options
$20.00 – $27.00
Eaglevision
Eaglevision Tube Adapter Rings
$20.00 – $27.00

This is high quality 30mm to 1″ or 34mm to 30mm scope tube adaptors, made of aluminium.

Designed To Works With All Eaglevision Scope Mounts.

Select options
$20.00 – $22.00
Ninja X Reg Rebuild Kit
Ninja Paintball X Reg Rebuild Kit
$20.00 – $22.00
This Kit Contains All Of The Most Consumable Parts in a NINJA X Reg
This Kit is for the Large X-Reg Piston Variant that measures 13.90mm in diameter at the flange of the large piston.
The Small section of the piston is 7.90mm in diameter.
- 1 – User-selectable Burst Disk (1.8k, 3k, 5k, 7.5k
  
  1 – Large Upper Large Piston O-Ring
  
  1 – Small Lower Large Piston O-Ring
  
  2 – Regulator Bonnet O-Rings
  
  1 – Fill port o-ring
Select options
$21.95
Ninja Regulator Rebuild Kit Part #NINJARBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #NINJARBK – Rebuild Kit for Ninja NON Pro Regulators.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
Ninja PRO V2 Regulator Rebuild Kit Part #PRORBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #PRORBK – This Rebuild Kit for Ninja Pro V2 Regulators ONLY.

Like the one below:

This rebuild kit is not for the Umarex Gauntlet Stock Regulator.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
Mini 5000PSI face
Ninja Black Mini Gauge
$21.95

Ninja Paintballs mini pressure gauge.

Face is black and the dial reads to 5000PSI

Select options
Sale!
Original price was: $25.00.Current price is: $21.95.
Inline high pressure filter
Mini Oil-Water Filter
Original price was: $25.00.Current price is: $21.95.

Mini high pressure inline oil and water separator.

While it is not the largest and most effective oil-water separator, it offers some protection from moisture, oil, and dirt that would otherwise be pushed right into your PCP.

Due to the small capacity of the filter be sure to open the unit up, remove all the filters, and allow them to dry between uses else you run the risk of etching the cylinder or saturating the filters and forcing the trapped water, oil and debris into your PCP

Select options
$21.95
NINJAMFV
Ninja Mini Fill Valve
$21.95
Select options
$21.95
NINJAOFV
Ninja O-ring Boss Fill Valve
$21.95
Select options
$21.95
UX 6000PSI GAUGE
Umarex 6K Gauge
$21.95

This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

This gauge will not fit the Ninja Paintball Version

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
Sold out!
$23.00
AR Pistol Grip
Magpul Beaver Tail Grip
$23.00

A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

Material: Dupont Zytel 30% glass filled nylon

Made in the USA

Read more
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 5000psi WHITE
24MM Mini Gauge 5K (WHITE)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 5000psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 3500psi COLOR
24MM Mini Gauge 3.5K (COLOR)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 3500psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
$24.00
Waterproof Case for Firefly 8SE 90 Degrees
$24.00

Clear waterproof camera Case for the Hawkeye Firefly 8SE version camera.

Select options
Sale!
Original price was: $45.00.Current price is: $24.00.
8mm Threaded 6000psi mini gauge
24MM Mini Gauge 6K
Original price was: $45.00.Current price is: $24.00.

Small 8mm threaded 6000psi PCP gauge.

Fits Avenger PCP

Select options
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
Sale!
$25.00 – $35.00
Includes G1, G2, G30, G2SL, & G30SL variants
HP Barrel Band For Umarex Gauntlet
Rated 4.67 out of 5
$25.00 – $35.00

Available in the classic Picatinny rail version or the 15mm thick rail less version.

Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!

Select options
Sold out!
$25.00
One Pair Dovetail to Picatinny Adapters
Eaglevision Picatinny to Dovetail
$25.00
These are 26mm long by 11mm Dovetail to Picatinny Adaptors
Made from aluminum

Package includes:
- 2x 26mm adapter
- 2x allen key
- 4x top grab screws (2 different lengths)
- 4x spare ending grab screws
Read more
Sale!
$30 to $1000
Gauntlet 30 SERVICE Builder
$30 to $1000
Hajimoto Productions Gauntlet .30 Service Selector/Builder

Important Information:
This builder is used for G30 OWNERS who understand that they will be sending in their G30 to have modifications performed. If you are looking to purchase any of the parts listed below, you will want to leave SERVICE and use the SEARCH for the PART you want.

So you didn’t know we offered turnkey G30 packages? So you already own a G30 and wish you could get were able to have some of the service modifications that are available on some of our Airgun Packages? Well, we got you covered with this G30 specific Service Builder.

This menu system allows you to select only what you want. When you’re done selecting, you add to cart and checkout. In the end you have a complete turnkey service request for your Gauntlet .30 Caliber!
- The Gauntlet 30 Caliber
  Shortly after your order is received, we will respond with the shipping information as well as what your shipping label needs to contain.
The shipping you pay at checkout is only a placeholder and the actual shipping fees associated with this order will be adjusted so that you only pay what is required once we receive your package and calculate the actual size and weight of your package. In some cases, you will be required to pay more and in others, you will receive a refund.

Please note that this service is exempt from any discount campaigns.
Select options
Sale!
$25.00 – $30.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Stock Barrel)
$25.00 – $30.00
** THIS BARREL BAND IS FOR THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE – CLICK HERE IF YOU HAVE THE HAJIMOTO MODIFIED BARREL**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with stock barrel suppressor installed.
Select options
Sale!
$25.00 – $30.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Modded Barrel)
$25.00 – $30.00
** THIS BARREL BAND IS FOR THE HAJIMOTO MODIFIED BARREL – CLICK HERE IF YOU HAVE THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with a Hajimoto modified barrel installed.
Select options
$27.00
5 Piece Stak Pak W/Spring
Barra 1100z Stak Pak W/Spring
$27.00

Only fits the 19.25″ barrel length version. Middle to late 2023 produced 1100Z barrels were increased in length to 22.25″ eliminating the free space that used to allow a spring and baffles to fit.

Help quiet down your Barra 1100z with our custom-fit HP 5-piece Baffle Stak and tension spring. There are two different-sized baffles to help eliminate patterned harmonics in the air stream.

Select options
$28.00
Adjustable Butt Stock
Butt Stock
$28.00

Buttstock Assembly, 6 Position, Mil Spec, Carbine, Black

Select options
$30.00
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00

This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

Select options
Sale!
Original price was: $45.00.Current price is: $30.00.
WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
Original price was: $45.00.Current price is: $30.00.
Westhunter Adjustable height scope rings
- Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
- The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
- The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
- Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
- The finishing touch to the dovetail rail and optic combination.
- Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.
Specifications listed below
Select options
$30.00
Tube and Nut
Buffer Tube with Castle nut
$30.00

Made in the USA Mil Spec buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock

Select options
$30.00
Oil Water Separator Cartiridge
$30.00

Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.

Select options
$30.00
From 7/8″-14 to M18x1.5
Saber Tactical Tank Valve adapter
$30.00

This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks.

Select options
$30.00
Haji-Notos Mag 11 rounds
Notos Expanded Magazine
$30.00

Introducing the Haji-Notos 11 Shot Expanded Magazine!

This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

Please note that our design loads from the right.

Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

The Haji-Notos magazine works with a red-dot or optic but does not work with Umarex fixed fiber optic sights.

LOADING THE NOTOS MAGAZINE

Select options
$30.00
Small 13ci (213cc) 3000psi
13ci 3K PSI TANK
$30.00

A 3000psi 13ci (213cc) aluminum paintball style tank.
This is an industry standard 5/8″- 18 threaded bottle with a flat bottom.

This is the same bottle installed on the Original Gauntlet 1 in .177, .22 or .25 caliber PCP as shown below.

Airgun is not included

Select options
$33.00
Gauntlet Mini Magazine
HP Gauntlet Mini Mag
$33.00
Introducing the HP Mini Magazine.

The old lidless design is being phased out. As inventory is exhausted, we will switch to the new magnetic lid style, as shown for the .177 and.22 caliber versions.

Fits all generations of Gauntlet

New Magnetic Lid Design! Smooth and reliable magazine that is shorter to allow a fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 caliber. It extends your capabilities by increasing the number of shots before requiring a reload.

The stands only 40.90mm (1.610″)

This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

Features
- An easy to load.
- Easy partial fill design.
- .177 = 16 shots.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ )
Select options
$33.00
Benjamin Marauder Mini Magazine
HP MROD Mini Mag
$33.00
Introducing the HP Mini Magazine.

The same reliable design as our expanded magazine but is slightly shorter to allow the magazine to fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Benjamin Marauder in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots between reloads. The magazine’s operation is smoother and offers a more reliable chambering of rounds.

WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

The stands only 40.90mm (1.610″ a little less than 5/8″)

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

Features
- Easy-to-load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = Holds 13 shots (Stock Mag Holds 10 Shots)
- .25 = Holds 11 shots (Stock Mag Holds 8 Shots)
- The magazine height is 40.90mm (1.610″ a little less than 1-5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$33.00
Avenger/Origin Mini Magazine
HP Avenger Mini Mag
$33.00
Introducing the HP Mini Magazine.

The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

The stands only 40.90mm (1.610″ a little less than 5/8″)

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ a little less than 5/8″)
- Mags also fit the Avenger Bullpup II
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$33.00 – $35.00
Beeman 1358 Mini Magazine
Hajimoto’s Beeman 1358 Mini Magazine
$33.00 – $35.00
Introducing the HP Mini Magazine.

New magnetic lid design! This magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

The stands only 40.90mm (1.610″ a little less than 5/8″)

Removeable magnetic lid allows you to drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

Features
- An easy to load design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .177 = 18 shots
- The magazine height is 40.90mm (1.610″ a little less than 5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
Sold out!
$33.95
Avenger Shroud Adapter
$33.95

The Newer Avengers use a threaded plastic shroud adapter which the shroud screws onto. The stock plastic mount is weak and prone to breaking if over tightened which means you cannot tighten it down adequately. This can lead to the shroud being able to move around a bit which will affect accuracy. This high-quality adapter will fix those issues and create a more consistent shooting airgun. Or just replace a broken or damaged shroud mount.

The AE Swede adapter is CNC machined from 7075 high-strength aluminum part and utilizes two set screws. You can clock the piece however you want and do not need the stock barrel detents to lock in place. This helps when holes have been drilled in the shroud at the rear for extra sound deadening ability.

Read more
Sold out!
$35.00
Evanix Rainstorm II Baffle Stack
$35.00

Evanix Rainstorm II Baffle Stack

Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

Baffles should be pointing towards the breech

<= Towards the breech —— Towards the Muzzle of shroud =>

[░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
SO SC NC NC SC SC NC NC

SO = STAND OFF
NC = NORMAL CONE
SC = SHORT CONE

Select options
$35.00 – $40.00
For Gauntlet .177, .22, .25 and .30 Calibers
Hajimoto’s Gauntlet Expanded Magazine
Rated 4.00 out of 5
$35.00 – $40.00
Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

Features
- An easy to load NO LID design or the new magnetic lidded version.
- No pre-winding is necessary.
- Easy partial fill design.
- .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
- .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
- The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
- The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
Sale!
Original price was: $39.99.Current price is: $35.00.
HP Stak Pak for Hatsan QE
Rated 5.00 out of 5
Original price was: $39.99.Current price is: $35.00.

Stak Pak for Hatsan QE shrouds (.357, .457, or QE screwed in place open sights Not Included)

Unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the first full-sized baffle and then arrange the stack as shown in the packaging.

A ten-piece kit that directly replaces the two hair curler style baffles inside any Hatsan with a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove noise and turbulence in the air stream. The baffle stack rides on a high-tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357, .457, and models with the fixed sight on the QE swell that are screwed into an internal ring.

The result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.

If your QE shroud has a fixed sight that is screwed to a ring that is inside the QE swell section of the shroud, you cannot use the HP STAK PAK.

Installation video is listed in the DESCRIPTION section below

Select options
$35.00
RTI Priest 2 Shroud Extender #A66
RTI Priest 2 Shroud Extender #A66
$35.00
If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so.

Features:
- 6061 T6 aluminum
- Knurled cap
- Matte black anodize
Select options
Sold out!
$35.00
DonnyFL KOI/Tanto Endcaps
$35.00

KOI and Tanto End caps in 1/2 x 20 threads

Select options
$35.00 – $40.00
Fits both Avenger and Origin
HP Avenger Exp Mag
$35.00 – $40.00
New redesigned HP 2.0 magnetic lid design is available for the .22 and .25 Caliber!

Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177, .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

Features
- An easy to load NO LID design.
- New magnetic lid design available for .22.
- No pre-winding is necessary.
- Easy partial fill design.
- .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of all calibers is 50.25MM (1.978″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$35.00
Air Venturi Avenger Bottle Conversion Barrel Band
Avenger Bottle Conversion – Barrel Band
$35.00
Available in two sizes:
- Small 59-61.5mm Diameter CF Tank (Typically fits 0.35L (350cc), 0.36L (360cc), 0.42L (420cc), 0.45L (450cc), 0.50L (500cc), & 0.70L (700cc) cylinders)
- Large 62-63mm Diameter CF Tank (Typically fits: 0.38L (380cc), 0.48L (480cc) & 0.58L (580cc) Cylinders)
** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **

The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.
Select options
$35.00
The MROD, Expanded Magazine
HP MROD Exp Mag
$35.00
Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

New magnetic lid. This magazine fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it.

Features
- Redesigned magnetic lid design available for .177, .22, and in .25 calibers now.
- Drop in loading.
- Easy partial fill design.
- .177 – 21 shots, an increase of 110% over the stock mag. The magazine’s height is 50.25MM (1.978″)
- .22 = 17 shots, an increase of 70% more shots over the stock mag. The magazine’s height is 50.25MM (1.978″)
- .25 = 14 shots which is an increase of almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$35.00 – $40.00
Airacuda & Airacuda Max .22/.25
Hajimoto’s Airacuda, Expanded Magazine
$35.00 – $40.00
Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
- The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
- Available in right-side loading for the .22 caliber soon to come for the .25 cal.
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
Sale!
$35.00 – $40.00
Buck Rail Suppressor
BUCK-RAIL 1/2 X 20 SUPPRESSOR
$35.00 – $40.00
Genuine Buck-Rail Product
- Designed to be compatible with 1/2-20 UNF male threads
- Stocked in 177/22 caliber
- 3d printed in Polycarbonate plastic in the US by a veteran-owned business
- Utilizes high quality EZ Lok steel inserts for extra durable threads
- 7 cone-shaped interior baffle design with large muzzle exit expansion chamber
- Dramatically reduces the report without diminishing accuracy or muzzle velocity
Note: Photos that show a part installed are for reference only. The product shown does not include the airgun or the adapter. This listing is for the suppressor only.
Select options
$40.00
For the Gauntlet 1 or 2
Umarex Gauntlet 1/2 x 20 adapter #A23
$40.00

This part is designed and manufactured by DonnyFL

Select options
$40.00
Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
$40.00

Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

This part is designed and manufactured by DonnyFL

Select options
$40.00
Hatsan Blitz M18X1 Adapter A117
$40.00

This part is designed and manufactured by DonnyFL

This adapter allows you to screw on an airgun suppressor with M18x1 threads.

Select options
$40.00
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00

Fits the Benjamin Akela and Kratos PCP’s

This part is designed and manufactured by DonnyFL

Select options
$40.00
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00

INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$40.00
Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00

This part is designed and manufactured by DonnyFL

Select options
$40.00
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

This adapter does not fit on the Umarex Hammer Carbine.

Select options
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$45.00
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00

Specifically for the AV Avenger

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This part is designed and manufactured by DonnyFL

Select options
$45.00
HP Strip Stak Pak for PP750
$45.00

Strip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada

Select options
$45.00
Beeman Underlever 1357 | 1358 Adapter #A86
$45.00

Specifically for the Beeman 1357 / 1358

This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.

This part is designed and manufactured by DonnyFL

Select options
$45.00
Bipod Picatinny
ATLAS LIKE Bipod
$45.00

Atlas Like Bipod

Select options
$45.00
Hatsan QE Big Bore .357/.457 M18x1 Adapter A54 #A54
$45.00

This part is designed and manufactured by DonnyFL

Select options
Sale!
Original price was: $65.00.Current price is: $45.00.
AR Stock Folder
Side Folding Stock Adapter
Original price was: $65.00.Current price is: $45.00.
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.

FEATURES
- Aerospace grade aluminum. Matte Black Anodized finish.
- Modifiable for pass-through for hammer adjusters.
- Designed to fold to the left but can be made to fold right as well.
- Locks in the open and closed positions*.
- Compatible with AR15 and AR308 extension tubes.
- Works perfectly for the HajiNotos and Tactical Gauntlet Kits.
(* The hinge does have a certain amount of play when locked in either position.)
Select options
$46.00
EagleVision 1/2.3″ 12MM LENS GoPro 2, 3 and 4
GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
$46.00
This Lens fits the GoPro 2, 3 and 4

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/1.8″ version which is a much better lens that allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Select options
$47.00
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00

UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Avenger

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$47.00
Origin .22/.25
HP Strip Stak Pak for Origin
Rated 4.33 out of 5
$47.00

NEW ENHANCED DESIGN

UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$48.00 – $96.00
Two Bar System or Extra Clamps
Eaglevision Twobar or Clamps (Scope Cam)
$48.00 – $96.00
These parts are for you if:
- You already have an Eaglevision Scope Camera System and want to convert it to the new Two Bar Configuration
- You need additional clamps to eliminate the need to constantly swap a clamp to another scope.
This is high quality 30mm to 25mm (1″) or 34mm to 30mm scope tube adaptors, made of aluminum.

Here is a top-quality installation video from AirBuks.

Be sure to go by his YouTube channel and watch some of his awesome air gunning content.

Designed To Work With All Eaglevision Scope Mounts.
Select options
$49.00
Needed to install a bottle
Avenger Bull Pup Primary Adapter
$49.00

Here is our primary adapter that allows the installation of the Doux Tech on the Avenger Bull Pup PCP.
The primary adapter replaces the lower pressure tube adapter allowing the bottle adapter to be installed on the airgun.

You will transfer the o-ring from the Avengers pressure tube to the Primary Adapter.

Select options
Sale!
Original price was: $80.00.Current price is: $49.00.
Custom length 47″ Fill Hose
Huben Power – High Pressure Fill Whip
Original price was: $80.00.Current price is: $49.00.
This is a high quality heavy duty high pressure fill whip that Hajimoto Productions had made to 47″, which provides a more reasonable amount of slack and distance when using a portable compressor or fill tanks than other whips on the market.
- Heavy Duty 4500 PSI Assembly.
- Rugged and durable material wrapping.
- Replaceable/Serviceable Stainless Steel threaded high pressure fittings.
- Fits the typical 8mm fill nipple on PCPs and Paintball equipment.
- Available in two configurations: Female on both ends or Male on one Female on the other.
Select options
Sale!
Original price was: $60.00.Current price is: $49.00.
M8, M10, and 1/8″ Threaded Digital Gauge
28mm Digital Pressure Gauge
Original price was: $60.00.Current price is: $49.00.
- 28MM Diameter
- M8, M10, or 1/8″BSP and 1/8″ NPT Threaded versions available
- Display in PSI
- Auto Shut off in 30 secs
- Digital Display 1% Accuracy
- Black Rubber Protective Sleeve
- Working pressure 0-4500psi
- Weight 32g
- Gauge body is made from high-grade brass
Select options
$50.00
Reg Pressure Tester
HubenPower Regulator Tester
$50.00
High quality HubenPower reg tester.

Features
- Micro threaded activation knob.
- Built in quick action pressure relief knob.
- High pressure gauge to 6000 psi.
Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.
Select options
$50.00
Eaglevison Firefly Camera Carrier
Firefly 8SE to Eaglevision Scope Cam
$50.00

For the user that has an Eaglevision Scope Cam Setup and would like to use a FireFly with it. Some images show the camera case with the optional open door installed. This is not an included option.

Select options
$50.00
DonnyFL A115 JTS Adapter
JTS Airacuda Adapter #A115
$50.00
Specifically for the Airacuda Standard or the Max in any Caliber (.22, .25, or .30)

Because this adapter was made to fit both the Standard and Max versions of the AiraCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not affect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design with this flexibility to overcome the challenges of this airgun’s shroud design so that moderators could be used.

Key Features:
- Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
- Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
This part is designed and manufactured by DonnyFL
Select options
$50.00
For G30, G30SL or Any Gen Gauntlet
Gauntlet Barrel Chambering Correction
$50.00

Service to correct the Gauntlet series of PCP’s. Calibers include .177, .22, 25, 30, or the 30SL, hard chambering of slugs issues.

Select options
$50.00
For all G barrels in all calibers
G Barrel Transfer Port Work
$50.00

Service to improve the barrels transfer port by enlarging and polishing the inlet. All calibers benefit from this service when trying to achieve maximum power and efficiency from your build.

Select options
Sale!
Original price was: $129.00.Current price is: $50.00.
AR Stock Folder Style #2
Side Folding Stock Adapter #2
Original price was: $129.00.Current price is: $50.00.
A robust and reliable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This style #2 folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.

FEATURES
- Aerospace grade aluminum. Matte Black Anodized finish.
- Low hinge stays out of the way when charging the weapon
- Adjustable hinge tension
- Set screw to prevent adapter loosening from receiver
- Quick detach sling attachment point
- Tool-less bolt carrier extension
- Adds about 1.7” length of pull
- Includes installation tool
- Works perfectly for the HajiNotos and Tactical Gauntlet Kits.
(* Much tighter tolerances than style #1 folder)
Select options
$55.00
Trigger work
$55.00

The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your trigger group, you simply decock and degas the Gauntlet, remove it from the stock, and remove the two fasteners that hold the group to the bottom of the pressure tube.

If you elect the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

Select options
$55.00
11.4cc plenum expansion for Avenger
Doux – Avenger Power Plenum
$55.00
AVENGER/LEVIATHAN POWER PLENUM:
- SIZE: 11.4cc
- STACKABLE
- BLACK ANODIZED WITH MATT BLACK GUN COATING
- TYPICAL PERFORMANCE INCREASE IS AROUND 20FT/S WITH NO OTHER MODIFICATIONS.
THIS PLENUM IS NOT DESIGNED TO NOT FIT THE BULL PUP VERSION

INSTALLATION CAN BE MADE USING TYPICAL SNAP RING PLIERS

MADE IN SOUTH AFRICA

Installation video below
Select options
$59.95 – $69.95
Microbore 4500PSI Extension
Ninja Microbore Fill Whip
$59.95 – $69.95
- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Select options
$59.99
Side Shot Scope Clamps
$59.99

The clamps come in 1″, 30mm and 34mm to fit your scope tube. They allow you to mount have multiple clamps already installed on your rifles so all you need to do is slide on the Side-Shot, tighten the thumbscrews and record!

These parts are 100% American-made, precision CNC’d parts! These clamps are precision machined, sent in to be anodized, and then back for assembly.

Solid, Secure and its stainless steel parts keep it from rusting.

Select options
$59.99
Clamp with Pic rail
Saber Tactical 55mm Clamp
$59.99

If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

Fits perfectly for Umarex Gauntlets Stock tanks.

This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

Select options
Sold out!
$60.00
DISCONTINUED
HP Strip Stak Pak for Evanix Air Speed
$60.00

Evanix Air Speed Air Stripper and Baffle Stack _
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$60.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
Rated 5.00 out of 5
$60.00

Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

This part is designed and manufactured by DonnyFL

Select options
$60.00
GOPRO Camera Housing
Eaglevision GOPRO Camera Housing
$60.00
EV GoPro Camera Housings.
- Camera Case model for GoPro 5-6-7
- Camera Case for 9-10-11-12
Select options
Sold out!
$60.00
Adjustable Butt Stock
Hogue Butt Stock
$60.00

SPECS
• Precision fit for military specification buffer tubes (diameter = 1.15″ / length = 7.25″)
• Material: OverMolded^® rubber / reinforced polymer
• Color: Black

FEATURES
• Perfect compatibility with Hogue OverMolded grips and forends
• Light-weight skeletonized reinforced polymer construction
• Anti-rattle and beard-safe design
• Collapses to user’s preferred shoulder position
• Polymer cap provides snag-free shouldering
• Rubber/polymer hybrid butt pad cushions recoil
• Multiple swivel sleeve and sling mounting positions

Read more
$60.00
7XRGB20 Tri-Color Dot Sight
Axeon Optics
$60.00
Select options
$60.00
Tactical Grip Adapter – NOTOS
Buck Rail Notos Grip Adapter
$60.00
- Made in the USA Laser Fused PA12 Nylon construction
- Add a Milspec AR Stock and Grip to the Notos & PP750
- Grip available in Black
- Backed by a LIFETIME WARRANTY
Installation Video Below. Video compliments of the Airgun Advisor Channel on Youtube
Select options
Sale!
Original price was: $82.00.Current price is: $68.00.
Collet system goes over diopter
Eaglevision USH-46 Collet
Original price was: $82.00.Current price is: $68.00.

The USH-46 is designed to hold all the scopes with or without threads on eye relief and will connect to the Eaglevision scope camera mounting system.

This unit can be connected to 99% of the scopes with a dimension of 40mm to 46.5mm and it will find the center automatically while you are tightening it.

Select options
$70.00
Install Super Tune Kit
$70.00

Please note that these are services to your rifle and not just the parts. If your looking for parts only head to the PRODUCTS section of the website.

The service of installing the Super Tune Kit does not include shipping. Return shipping will be calculated and added at check out. Shipping cost will be based on a complete rifle sent to Hajimoto Productions in the original box and packing materials. Stock modification is part of the STK install which is why you need to send the entire rifle to us not just the action. If the rifle is received in something heavier than the typical 14lbs, additional shipping costs will need to be paid prior to the rifle being shipped back to the customer.

Select options
Sale!
$75.00 – $93.00
Gauntlet STK
Super Tune Kit (STK) for Gauntlet 1 and 2
Rated 5.00 out of 5
$75.00 – $93.00
THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile. (Power examples given are the .22 caliber version Gauntlet 1)

For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

CONTENTS:
- Adjuster Plug Assembly.
- Smaller, Lighter Composite Poppet.
- Hajimoto Hammer Spring (Black Long)
- Lighter Trigger Spring (Bright Small).
- 5/64″ Allen Wrench For Adjusting Power.
The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

Be sure to follow my written instructions in the document below.
Use the video to install but follow these written instructions to adjust and tune the STK:

Written Detailed Tuning Instructions for the STK

More details below.
Always read the content below because any revised instructions, video, photos, or other links will be there.
Select options
Sale!
Original price was: $130.00.Current price is: $80.00.
Avenger Grip Adapter V2 by Buck Rail
Avenger Grip Adapter V2
Original price was: $130.00.Current price is: $80.00.
The Grip Adapter is made from SLS Fused PA12 Nylon. It accepts AR Grips with or without beavertails. It accepts AR15 or AR308 extension tubes and threaded side folders. It uses an innovative two-point attachment method for a rock-solid attachment. This listing is for the Grip Adapter only, there is no grip, hand gaurd, buffer tube, folder, or butt stock included. All those items are available separately.

Made in the USA. SLS fused PA12 Nylon Construction. Lifetime Warranty

Supports both AR Grip or Beavertail Grip Styles (Not Included)

1-3/16×16 Threaded receiver accepts AR15 and AR 308 extension tubes (Not Included)

Innovative two-point attachment method makes for a rock-solid mount

Compatible with plenum and bottle conversions.
Select options
Sold out!
$88.00 – $325.00
Allows for a dual Reg Setup
AE Swede Avenger Bottle Adapter
$88.00 – $325.00

This is AE Swede’s bottle adapter and plug that allows the user to run dual regulators.
Here is where you will find the reg you need. Just select 3000PSI output.

Select options
$99.00
Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$99.00
Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$99.00
Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$99.00
Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$110.00
Fits the G1, G2 or G30
Real 2 Stage Trigger for the Gauntlet
Rated 5.00 out of 5
$110.00
Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
- The Trigger Is Stainless Steel 17-4 Through Hardened
- The Trigger Shoe Is Aluminum 6061-T6
Please see the installation video below for more details.

Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.
Select options
$110.00
For G30 and G30SL
G30 Barrel Shorten and Recrown
$110.00
Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

The service executes the following:
- Reduce barrel length by 2.5″ to remove the choke.
- Recrown barrel.
- We provide a new shorter replacement barrel shroud.
This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

Any outstanding balance must be paid before we ship out the service order.
Select options
Sold out!
$110.00 – $175.00
PCP Air Compressor Filter 4500psi Oil Water Separator
$110.00 – $175.00

A quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.

Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.

Made from high-quality aircraft aluminum and is rated for safe use.

Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.

Select options
$110.00
MDSR1 Micro Dot Sight with Riser
Axeon Optics
$110.00
Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

Features:
- 1X Magnification
- 20mm Objective
- Red Dot LED Reticle
- .50 MOA Adjustment Size
- Adjustable Windage and Elevation
Select options
Sold out!
$112.00
EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4
GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
$112.00
Lens fits the GoPro 2, 3 and 4.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Read more
Sale!
$115.00 – $424.00
With or Without Cylinder
Doux Avenger Bottle Adapter
$115.00 – $424.00
Convert your Air Venturi Avenger into a bottle PCP!
- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa

Installation video below:
Select options
Sold out!
Original price was: $130.00.Current price is: $120.00.
EagleVision 1/1.8″ 12MM LENS
GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
Original price was: $130.00.Current price is: $120.00.
Lens fits the GoPro 5, 6 and 7.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

Just click HERE to be redirected to this product on his website.
Be sure to tell Bob that Hajimoto sent ya ?
Read more
From $125.00
This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00

This is where you can build your own TacVenger Kit to install on your existing Avenger.

Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.

then you simply add the items you want in your kit and you are all set!

The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

Select options
Sale!
$125.00 – $130.00
Chronograph by Nate
NateChrony V2
$125.00 – $130.00

The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles. It is accurate, affordable, super easy to use, and best of all – no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.
Using your mobile phone as the screen and battery, means you get the best display on the market and never get surprised by a flat battery in your Chronograph.

The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, and has four additional save slots – all of which retain the data when power is lost. You can configure pellet weight, display hold time, and adjust the NateChrony readings to match another Chronograph.

Specifications

Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
Resolution: <0.1fps shot to shot at 1,000fps
Air powered guns only
CO2 power can cause vapour, not recommended
Maximum caliber: ~45-50 cal (depending on power)
Maximum power: 150 fpe

Select options
Sale!
$125.00 – $130.00
300CC 4.5K PSI M18 Threaded CF Tank
0.30L M18 Thread Carbon Fiber Tank
$125.00 – $130.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 300cc/0.30L capacity
- Available in Gloss Or Matte
- 251mm x 55mm
- M18 Threaded
Shown Below On the HajiNotos
Select options
$130.00 – $215.00
for .177, .22 and .25 NOT .30
Gauntlet Short Shroud Combo
$130.00 – $215.00
This part is designed and manufactured by DonnyFL for airgun use only

Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

If Your Gauntlet is:
- .177 Get a .177/.22 Supressor
- .22 Get a .22/.25 Supressor
- .25 Get a .25/.30 Supressor
Get it?
Select options
Sale!
Original price was: $150.00.Current price is: $130.00.
User adjustable M18 regulator
Huben Power Black Hawk Pro
Original price was: $150.00.Current price is: $130.00.
The Huben Power Black Hawk Pro is a very stable, high-flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to what is required for the application. The quality of materials and craftsmanship is top-tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Streamline and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high-pressure gauge input.
- Regulating output pressure range 500psi~3600psi
- Comes with a standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may randomly be green or black.
- The regulator has a high airflow rate, is lightweight, easily operational, re-buildable, and designed for use with HPA/CO2.
Select options
Sold out!
$134.00
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Select options
Sale!
$135.00 – $140.00
360CC 4.5K PSI M18 Threaded CF Tank
0.36L M18 Thread Carbon Fiber Tank
$135.00 – $140.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 360cc/0.36L capacity
- Available in Gloss Or Matte
- 9″ x 2.4″ (228mm x 61.5mm)
- M18 Threaded
Shown Below On the HajiNotos
Select options
138 to 338
Build your own Tactical Gauntlet Kit
Gauntlet Tactical Combo Builder
138 to 338

Gauntlet Tactical Builder!

If you just want the Tactical Grip Adapter Product Page Click HERE

PLEASE USE THE NOTES SECTION BELOW TO TELL US YOUR GAUNTLET VERSION AND CALIBER.
ALSO IF YOU WANT A LOGO VERSION OR NO LOGO VERSION OF THE CHASSIS

You select the parts you want to addon to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

The builder starts with the Grip Adapter, fore grip and included pistol grip.

Installation video is listed below

Select options
$139.99
For G1, G2/22, G2/25, G30, SL22, SL25 or SL30
Gauntlet Tactical Conversion Kit
Rated 5.00 out of 5
$139.99
Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
Kit does not include collapsible butt stock or buffer tube. Due to multiple options/styles, you select and add to the cart.

If you would rather use the Gauntlet Tactical Builder Interface, click HERE
- Includes AR Pistol Grip
- Laser Sintered Nylon construction. LIFETIME WARRANTY
- Made in the USA by a veteran-owned business
- Kit allows the ability to add an AR Pistol Grip and Adjustable Buttstock to your Gauntlet!
- Compatible with Gauntlet G1, G2, SL22, SL25, and SL30
- Accepts Milspec or Commercial AR15/AR308 Extension Tubes
- Handguard accepts M Lok accessories
- Typical Stock, Buffer Tube, Grip, and Tactical Kit weighs 21.5 oz. G2/G2SL OEM Precision Style stock weighs 41.0 oz
  The Gauntlet Tactical shaves off 1.21 Pounds (19.5 oz) of weight!
Accessory options include a Buffer tube and Collapsible Butt Stock

Installation video is listed below
Select options
$144.95
Ninja X Reg Custom Output Regulator up to 3100psi
Ninja High Pressure 5/8″-18UNF Custom Output Regulator
$144.95
5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
```
Select options

Sold out!

$146.00

NEW MODEL

Pro V3 for 3K and 4.5K Cylinders

Ninja Pro V3 Regulator 5/8″ Thread

$146.00

The Hajimoto Ninja Paintball Pro V3 SHP in 5/8”-18UNF Thread with Stainless Steel Cap Threads

Ninja's Pro V3 SHP with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
Dont confuse the this regulator with the lower pressure SLP versions out there, there is a difference.

Select options

$150.00
EagleVision 1/1.8″ 12MM LENS
GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$150.00

Lens fits the GoPro 9, 10, 11 and 12.

GoPro 9, 10, 11, and 12 cannot be used on the scope cam without changing the lens.
In order to use this product as intended, you MUST watch the below video on how to change the lens.
Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.

Your camera will be out of warranty if you remove the lens.

DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.

The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. You will need a T4 screwdriver or T4 screwdriver bit to do the installation.

This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.

We are not responsible for any damage you may cause to your camera when doing the lens swap.

Lens swap video

Select options
$150.00
Umarex Zelos Regulator by HubenPower
HubenPower Zelos Regulator
$150.00
- For Umarex Zelos
- Can be installed in 300bar/4500psi tank，Provides pressure reduction function for Umarex Zelos’ 300bar tank, reducing the 300bar/4500psi tank pressure to below 250bar/3625psi
- Installs directly without modification
- Rotary joint design, easy to adjust the position of the pressure gauge and fill nipple.
- Stainless steel material, strong and durable
- The factory set output pressure is approximately 22~24Mpa (3190~3480psi). This is not the final shooting pressure, Do not adjust!. （Do not turn the bottom adjustment knob if you are not sure what you are doing.）
- Umarex Zelos has an internal regulator. When you need to adjust the pressure for actual shooting, adjust the internal Zelos original regulator.
- Please do not adjust the output pressure of this product to more than 250bar (3625 psi)
- Comes equipped with a standard 8mm quick disconnect male foster fitting adapter for filling.
- The regulator has a high air flow rate, lightweight, easy operation, and re-buildable.
- Compatible with Air/CO2.
Select options
$154.95 – $155.00
Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

The ball and spring are provided but removed from the regulator.
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
```
Select options

Sold out!

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

NEW MODEL

PRO V3 REG WITH 13CI TANK

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator

Select options

$159.00 – $169.00
5/8″-18UNF Threaded Unit
Flex Reg Hajimoto Configurations
Rated 4.00 out of 5
$159.00 – $169.00

Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800 – 900 psi adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF (Bottle Thread) and Typical Paintball Threads of .825-14 NGO (PCP Thread).

Please note the Flex regulator can be used with any Air, Co2, or Nitrogen driven air gun not just the Gauntlet, providing it has the correct threading.

The Ninja Flex regulator is available in any 900 psi spread to a maximum of 3100 psi output but for the Gauntlet select from the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg

Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/600 to 1500PSI

Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1500 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1500 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1500 to 2400PSI

Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Select options
Sale!
Original price was: $210.00.Current price is: $159.00.
G1 Regulator, 22ci Tank and Barrel Band
Gauntlet 1 Power Bundle
Original price was: $210.00.Current price is: $159.00.
Our Gauntlet 1 Power Bundle! For the Umarex Gauntlet 1 in .177, .22 or .25 Calibers (Bundle is not for the Gauntlet 2)

The Bundle Consists of the following:
- Brand New Ninja Regulator (1100psi, 1300psi, 1900psi, or 2100psi)
- Brand New 22ci 3000psi Aluminum Tank for 70% more air volume!
- Our HP Barrel Band with Picatinny Rail for Flashlight or Bipod.
All for the cost of a regulator alone!

PCP/CALIBER STOCK PRESSURE BOOSTED PRESSURE

G1 .177 1100PSI 1300PSI

G1 .22 1100PSI 1300PSI

G1 .25 1900PSI 2100PSI
Select options
Sale!
Original price was: $175.00.Current price is: $160.00.
Used as the Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.Current price is: $160.00.
THE TK VALVE ONLY IS CURRENTLY OUT OF STOCK
IF YOU WANT THE POWER PLANT COMBO, WE DO HAVE STOCK
CLICK HERE

Genuine Huben Power Regulator with Power Plenum

This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
Select options
Sold out!
$173.00 – $175.00
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00

Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

Stock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

This setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!

NINJA REGULATORS ARE MADE IN THE USA!

Select options
$179.00
Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
$179.00

Introducing a Hajimoto Productions Exclusive offer!

13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSI

Installs on the Gauntlet with minor tank shroud modifications.

A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sold out!
Original price was: $245.00.Current price is: $185.00.
Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
Original price was: $245.00.Current price is: $185.00.
Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*

Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!

Description:
Brand Name: Hawkeye Series
Name: Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: Yes
Features:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,
– Supports WiFi
– Support for Bluetooth connection remote control (not included).

Package Includes:

1 x Camera

1 x Waterproof Case

1 x Waterproof Case Front Cover Case

1 x Bicycle Stand 1 x J Base 4 x Strap

1 x Plastic Tie

1 x Long Connector with Screws

1 x Short Connector with Screws

1 x 1/4 inch Adapters Set

2 x Mounting Base

2 x Adhesive Tape

1 x Metal Cable Tie

1 x Cleaning Cloth

1 x Lens Protection Frame

1 x Lens Protective Cover

1 x Microphone

1x English User Manual

All/any warranties are manufacturer-provided.

English Manual,
Click Here

*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Read more
Sale!
Original price was: $220.00.Current price is: $195.00.
Installation of our Sidelever on G2 or G1
Gauntlet Sidelever Install
Original price was: $220.00.Current price is: $195.00.

This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

See below for detailed shipping instructions and preparation videos.

Select options
$200.00
Tank Valve ST0031
Saber Tactical Tank Valve
$200.00

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze

Select options
$205.00
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$205.00

Introducing a Hajimoto Productions Exclusive offer!

22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI

If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sold out!
$210.00
370cc/.37L CE 5/8″ Threaded
22.5ci Carbon Fiber 4500PSI Tank
$210.00
Introducing a Hajimoto Productions Exclusive offer!
- Shaves a pound of weight off your G2 or G30.
- 22.5ci/370cc/.37L CE Certified CF Tank.
- 5/8”-18UNF Threaded so Stock Gauntlet Regulators will thread directly to this bottle.
  
  Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This is a 22.5ci / 370cc carbon fiber 4500psi max fill cylinder.

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
Read more
Sale!
$220.00 – $230.00
0.5L/500cc CE Certified CF Tank
0.50L Carbon Fiber Tank 4500PSI
$220.00 – $230.00

Half a liter of air, right here!

0.5L/500cc CE Certified CF Tank
Tank weight is 19.4 oz
Perfect fit for your custom build.

M18x1.5 Threaded

This is the same bottle we use on the TacVenger builds we offer.

Select options
Sale!
$230.00 – $385.00
Hajimoto Side Shot for Firefly 8SE 90 Degrees
$230.00 – $385.00

Hajimoto Side Shot for Firefly 8SE 90 Degrees

The Side Shot Firefly setup all done for you! Hajimoto professionally modified and installed a Firefly 8SE case so all you need to do is install your scope clamp drop in your Firefly 8SE 9o degree distortionless camera and go. You can also go with the complete turnkey solution which includes the Firefly Camera as well!

Installation video from Jeremiah @ Bullfrog Airguns check his YouTube Channel out, a very cool air gunner.

Select options
Sale!
Original price was: $240.00.Current price is: $230.00.
NEW MODEL
WestHunter WHT 4-16×44 FFP Scope
Original price was: $240.00.Current price is: $230.00.
The WHT Tactical First Focal Plane 4-16×44 Rifle Scope

Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Sun Shade
- Front and rear flip up lens covers
- Large Magnification Wheel (Removable)
Optional adjustable height scope rings are available

Features
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
- This optic has passed very strict WestHunter performance testing.
Specifications listed below
Select options
$239.00
GoPro 2-3-4 scope cam
Side Shot for GoPro 2-3-4
$239.00

Side Shot for GoPro 2-3 or4

The world famous Side Shot scope camera system but designed to support your GoPro!

The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

Select options
Sold out!
Original price was: $279.00.Current price is: $249.00.
FX Pocket Chronograph Mini V2
Original price was: $279.00.Current price is: $249.00.

FX Pocket Chronograph v2

The original FX Chronograph changed airguns by providing the
most important tool a modern shooter must have, in a compact, portable unit. Now FX Airguns is pleased to introduce the even smaller and improved FX Pocket Chronograph v2.

The v2 Pocket Chronograph is more pocket sized than ever at just
under the size of a 2” cube. It now has an internal battery that is recharged through an included USB-C cord. Multiple mounts are also included that allow the shooter to attach the chronograph to their rifle in multiple ways.

The chronograph itself can be used for more than just airguns. Any
projectile traveling under 1250 FPS can be accurately measured. This includes subsonic rifles, pistols, CO2 air rifles, paintball, and more. Since the unit uses radar technology, the Pocket Chronograph can be used in any weather condition without external accessories.

The setup is the same as the older version. To learn how to use it, follow the link here to watch the tutorial video.

All/any warranties are manufacturer provided.

Read more
$249.99 – $309.99
300cc, 580cc or 700cc Bottles
Air Marksman Carbon Fiber Tanks
$249.99 – $309.99
- M18x1.5 neck thread.
- 300cc (.3 Liter), 580cc (.58 Liter), or 700cc (.7 Liter)
- 300 bar fill pressure (4351 PSI)
- Bottle only no regulator or adapters included.
Select options
Sale!
Original price was: $325.00.Current price is: $260.00.
NEW MODEL
WestHunter WHT 6-24×44 FFP Scope
Original price was: $325.00.Current price is: $260.00.
The WHT Tactical First Focal Plane 6-24×44 Rifle Scope

Do not confuse this optic with the less robust Westhunter HD 6-24×50 Scope

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Honeycomb sunshade/diffuser
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- Shorter, lighter and brighter than the previous HD model.
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior WHT image clarity makes this a slam dunk when it comes to value for the dollar.
Specifications listed below
Select options
Sale!
$265.00 – $365.00
Huben Power Dream-Notos TK with 0.30L, 0.36L, 0.50L CF Tank
Haji-Notos Power Plant Combo
$265.00 – $365.00
Genuine Huben Power Dream-Notos TK mounted on a .30L (300cc) 0.36L (360CC) or .50L (500cc)

A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Includes 0.30L, 0.36l or 0.50L 4500psi Carbon Fiber Bottle in Gloss or Matte Black.
- Optional Barrel Band support to provide structural support for the Power Plant.
- Extremely stable externally adjustable regulator Output 500psi~3600psi
- Provides over 130 shots.
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Power Increase on the fly but decrease requires degassing the plenum.
See details below
Select options
$274.00
4.5K PSI Ninja Reg on a 18ci/295cc/.29L CE Certified CF Tank
Ninja Reg on 18ci Carbon Fiber Bottle
$274.00

Direct replacement with no modifications required for the Umarex Gauntlet 2 & G30/G30SL!
18ci/295cc/.29L 4500 PSI Carbon Fiber Bottle

Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

Includes Ninja’s HP regulator.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 18ci and is absolutely gorgeous on the Gauntlet 1 or Gauntlet 2.

The Gauntlet 1 will need to increase its tank shroud inside diameter to allow the foregrip/tank cover to side over this carbon fiber tank.

Operating Pressure Recommendations

Gauntlet 1:
.177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
.25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.

Gauntlet 2:
.22 Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.
.25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2300PSI.

Gauntlet 30/30SL:
Stock operating pressure 2800PSI Max Recommended pressure is 3100PSI.

NINJA REGULATORS ARE MADE IN THE USA!

Select options
$279.00
GoPro Side Shot 5-6-7
Side Shot for GoPro 5-6-7
$279.00

Side Shot for GoPro 5-6 or 7

The world famous Side Shot scope camera system but designed to support your GoPro!

The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

Select options
Sale!
Original price was: $390.00.Current price is: $280.00.
0.7L/700cc CE Certified CF Tank
0.70L Carbon Fiber Tank 4500PSI
Original price was: $390.00.Current price is: $280.00.

0.7L/700cc CE Certified CF Tank
Perfect fit for your custom build.

M18x1.5 Threaded

If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.

Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE

Select options
Sale!
$285.00 – $295.00
Huben Power Adjustable reg on a 300cc/.30L CF Tank
Huben Power on 300cc Carbon Fiber Bottle
$285.00 – $295.00
Direct replacement with no modifications required for the Umarex Gauntlet 2/G30/G30SL other than the fill nipple access hole that is discussed in the video below!
19ci/300cc/.30L 4500 PSI Carbon Fiber Bottle in two finishes.

Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Stream line and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high pressure gauge input.
- Regulating output pressure range 500psi~3600psi
- Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may be green or black randomly.
- Tank optional finish gloss or matt.
- The regulator has a high air flow rate, is light weight, easily operational, re-buildable, designed for use with HPA/CO2.
Includes the Huben Power Black Hawk Pro regulator.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 19ci and is absolutely gorgeous on the Gauntlet.
Select options
$289.00 – $390.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for GP 5,6,7 Hero Black
$289.00 – $390.00
A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x 2B-USH which includes:
  Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
  34 mm to 30 mm Ring Adaptor
  34 mm to 25 mm Ring Adaptor
- 1 x 2B-UCH which includes:
  2 x Aluminium Bars (17 mm long)
  1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
  2 x Ball Screws
  2 x Ball Grab Screws
- 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

Here is another video that shows the Eaglevision Scope Cam USH system being installed.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
$294.00 – $405.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for GP 9,10,11,12 Hero Black
$294.00 – $405.00
A very high-quality scope camera unit made to support the GoPro 9, 10, 11. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x GOPRO Housing 9, 10 ,11 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10 and 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x 2B-USH which includes:
  Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
  34 mm to 30 mm Ring Adaptor
  34 mm to 25 mm Ring Adaptor
- 1 x 2B-UCH which includes:
  2 x Aluminium Bars (17 mm long)
  1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
  2 x Ball Screws
  2 x Ball Grab Screws
- 1 x GOPRO Housing 9,10,11, 12 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10, 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case The new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a great video from Eaglevision Cam demonstrating how to replace the lens on your GoPro 9-11 or 12 Camera

Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
Sold out!
$294.00
NEW MODEL
PRO V3 Reg on a 22.5ci/370cc/.37L CE Certified CF Tank
Ninja Pro V3 Reg on 22.5ci Carbon Fiber Bottle
$294.00

ALL NEW!

Direct replacement with no modifications required for the Umarex Gauntlet 2 and Gauntlet 30 Cal!
22.5ci/370cc/.37L CE Certified CF Tank
Shaves off 1/2 a pound of weight compared to the 4500psi stock aluminum tank.
A complete regulator rebuild kit is included!

Includes the New Hajimoto Pro V3 regulator with Stainless Steel rotational bonnet.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 22.5ci and is absolutely gorgeous on the Gauntlet series of PCP.

The Gauntlet 1 will need to have its tank shroud inside diameter increased slightly to allow the foregrip/tank cover to side over this carbon fiber tank or simply remove the tank shroud.

Operating Pressure Recommendations

Gauntlet 1:
.177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
.25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2300PSI.

Gauntlet 2:
.22 Stock operating pressure 1900PSI Max Recommended pressure is 2150PSI.
.25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2400PSI.

NINJA REGULATORS ARE MADE IN THE USA!

Select options
Sold out!
Original price was: $339.00.Current price is: $295.00.
Flex Reg on 18ci/295cc/.29L CE Certified CF Tank
Power Flex Combo 18.3ci Carbon Fiber 4500PSI
Original price was: $339.00.Current price is: $295.00.
Introducing a Hajimoto Productions Exclusive offering!
18ci/295cc/.29L CE Certified CF Tank

Fits the Gauntlet 2 without any modifications.

The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. An 18.3ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet! The massive volume of air afforded you is mind-blowing.

The diameter of the tank is 54-55mm across so a modification to the forearm is required if you desire to continue to use the Gauntlets tank shroud. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Gauntlet Bottle Shroud Mod

Please see the examples provided in the accompanying photos.

The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. Please be careful if you have accessories on any of the MLok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!.

The cylinder’s outside dimension is slightly larger than the stock aluminum tank so my standard HP Barrel Band does not fit. You will need to use the HP Barrel Band CFT version
```
Regulator is Made in the USA!
The Power Flex Combo is set to either of the two Gauntlet configurations.
Simply select the proper configuration.

Power Flex Combo Configuration For .177/.22 Cal
Flex Reg set to 700 to 1500PSI
```
```
Power Flex Combo Configuration For .25 Cal
Flex Reg set to 1600 to 2400PSI
```
```
DO NOT USE Power Flex Combo Configuration For .25 CONFIG on .177 or .22
they are not capable of handling the pressures.
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
```
Select options
$299.00 – $495.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for Firefly 8SE 90°
$299.00 – $495.00
Hawkeye FireFly 8SE 90° Nondistortion Camera is optional. Some images show the camera case with the optional open door installed. This is not an included option.

A very high-quality scope camera unit made to support the Firefly. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
- 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.
Two Bar System includes:
- 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
- 1 x 2B-USH.
- 1 x 2B-UCH.
- 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
- 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system. Installation of the FireFly or GoPro is the same.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
$310.00 – $350.00
500cc CF Tank with Adjustable Reg
Flex Reg RTI Version & Tank
$310.00 – $350.00

Flex Reg designed and configured specifically for RTI PCP’S such as Prophet, Priest, & Priest 2
This Flex Reg comes paired with a brand-new Carbon fiber 4500PSI tank. The regulator is externally adjustable and has an effective adjustable range of 900PSI (62bar).

Using the slider you select what the maximum output will be and because the regulator has the ability to adjust, you can reduce that maximum output pressure down as much as 900PSI (62bar). You can of course set the pressure anywhere along that 900PSI (62bar) range to suit your tuning requirements. The regulator will not have a pin or ball seal in the bonnet. The tank cannot be removed while under pressure and must be degassed.

Because of practical limitations, regulator max output will be +/- 50PSI (3.5bar) within the requested maximum output.

Comes with a spanner wrench for adjusting the output on the fly.

** This regulator is 5/8″-18UNF threaded and will not fit M18 threaded bottles. This configured Reg is not sold separately.

Select options
Sale!
Original price was: $375.00.Current price is: $330.00.
Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank
Power Flex Combo 22.5ci Carbon Fiber 4500PSI
Original price was: $375.00.Current price is: $330.00.

Introducing a Hajimoto Productions Exclusive offer!

22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder. Installation video at the bottom of the page.

The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.

The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 75PSI to the requested output.

Select options
$350.00 – $435.00
Huben Power Adjustable reg on a 500cc or 700 CF Tank
Huben Power on 500 or 700cc Carbon Fiber Bottle
$350.00 – $435.00
Extrax Large Air Capacity for the Umarex Gauntlet 2/G30/G30SL !
Available in 500cc or 700cc PSI Carbon Fiber Bottle in two finishes.
The tanks are 4500PSI pressure vessels and much lighter than steel or aluminum tanks.

Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Stream line and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high pressure gauge input.
- Regulating output pressure range 500psi~3600psi (End user is responsible for any pressures beyond the PCP’s stated Maximum)
- Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may be green or black randomly.
- Tank optional finish gloss or matte.
- The regulator has a high air flow rate, is light weight, easily operational, re-buildable, designed for use with HPA/CO2.
Includes the Huben Power Black Hawk Pro regulator.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 500 or 700cc and is absolutely gorgeous on the Gauntlet.
Select options
Sale!
Original price was: $440.00.Current price is: $351.00.
TD 5-30X56 FFP 34mm W/Zero Stop
WestHunter TD 5-30X56 SFIR FFP Scope
Original price was: $440.00.Current price is: $351.00.
The Westhunter TD 5-30X56 SFIR FFP

Package includes:
- Scope
- 1 set of 34mm Picatinny Scope Rings
- Sunshade
- Large focus wheel.
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Massive 30x Magnification
- Incredibly large 56mm objective lens
- As close as 10 yards on the focus
- Zero Stop Turret.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior TD image clarity makes this a slam dunk when it comes to value for the dollar.
Here is a link to instructions for the ZERO STOP FEATURE

Specifications listed below
Select options
Sale!
$359.00 – $369.00
Flex reg and 30ci/500cc/.5L CE Certified CF Tank
Power Flex Combo 30ci/.5L Carbon Fiber 4500PSI
$359.00 – $369.00

Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation.

Introducing a Hajimoto Productions Exclusive offer!

30ci/500cc/.5L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This includes a 30ci/500cc/.5L CE Certified 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 900PSI!

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

Select options
Sale!
$360.00 – $560.00
Complete with Cylinder, Power Plenum, Bottle Adapter and Barrel Band!
Avenger Power Pak Bundle
$360.00 – $560.00
Introducing the Hajimoto Productions Air Venturi Avenger Bottle Conversion Power Pak Bundle!

You get everything you need to convert your Avenger into a lean mean bottle toting machine in days not weeks.

In the Bundle you get:
- User selected .30Liter (300cc), .50Liter (500cc), .58Liter (580cc), or .70Liter (700cc) 4500PSI Alsafe Carbon Fiber CE Certified Cylinder
- Doux Technologies Stainless Steel Bottle Adapter Kit
- Doux Technologies Power Plenum
- Hajimoto Productions Barrel Band with Picatinny Rail for your Bipod
Bundles save you big money!

You receive all your parts in one box typically in 4 days or less …….. not weeks!

INSTALL VIDEOS LISTED BELOW
Select options
Sale!
$360.00 – $419.00
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
$360.00 – $419.00

Awesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!

Ninja Paintball High Pressure Regulator mounted on a quality 0.37L (370 cc), 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.

Please be advised that if you use the 370 cc bottle and want to continue to use your stuck bottle shroud, be sure to remove any MSLOT accessories off the tank shroud before sliding it over your new carbon fiber tank as it will scratch it.

Watch my video below that goes over how to modify the brass inserts so they don’t scratch the tank also.

We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI

All custom built pressure units will have a +/- 75 psi tolerance.

Select options
Sold out!
Original price was: $460.00.Current price is: $419.00.
DISCONTINUED
HP M18 Reg and 700cc/.7L CE Certified CF Tank
NINJA DISCONTINUED (MORE)
Original price was: $460.00.Current price is: $419.00.

REPLACED WITH THE HUBENPOWER COMBO

Ninja Paintball discontinued the regulator (2/2025)

The Power 700 Combo is a 4500PSI Ninja High-Pressure M18 reg mounted on a 0.7L/700cc Carbon Fiber 4500PSI Cylinder.

The High-Pressure reg paired with the 700cc cylinder means shots galore!

Please note that this combo will not fit a Gauntlet or Gauntlet 2 as the tank diameter is larger than the rifle’s tank shroud will allow. This combo is intended for builds that do away with the tank shroud or to be used on other PCP’s that allow for a typical paintball regulator installation. Use the Notes if you are looking for a lower PSI than 2800PSI as we can build the reg to ANY PSI 3100PSI and lower.

Consider adding our Barrel Band made for the Power 700 Combo!

Because of practical limitations, regulator output will be +/- 75PSI (3.5bar) within the requested output.

Select options
Sale!
$450.00 – $660.00
HP G30 Copper
Hajimoto Gauntlet 30 – Copper Package
$450.00 – $660.00
This is the Copper Gauntlet 30 caliber build.

All of the packages we offer whether it is the Ultimate Package or the simple Copper Package, all ship to you after we completely check and verify that the rifle is not leaking, all fasteners are checked, and the entire rifle is inspected for missing parts or damage.

We make sure the action is performing correctly as well as shooting the rifle three times and reporting the shot string details and target.

The barrels are inspected and thoroughly cleaned prior to shooting so when you receive your dirty 30 is ready to deliver some hurty!

What you get in this Package:
- 1 new Umarex Gauntlet 30 Caliber ready to go.
- Optional externally adjustable regulator which comes with the extended fill fitting.
- Optional Build with Umarex Sidelever Cocking
See below for a detailed breakdown of what is included.

Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet 30 caliber. Please use the notes section to communicate any special requests like trigger preferences.

Lastly, if an item you want is out of stock and therefore you are unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.

When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Select options