Gauntlet Barrel Chambering Correction

For G30, G30SL or Any Gen Gauntlet

For G30, G30SL or Any Gen Gauntlet

$50.00

Service to correct the Gauntlet series of PCP’s. Calibers include .177, .22, 25, 30, or the 30SL, hard chambering of slugs issues.

SKU: HPSRVBRLCMBR Categories: , , , , Tags: , ,

Description

The service executes the following:

  • The barrel chamber depth and finish are corrected which allow for better loading of projectiles.
  • This can be added to a custom build order or can be a send in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

Once the order is received, a follow-up email will be provided and depending on the service request will contain detailed shipping instructions which will include shipping addresses and label information information.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need calculated and communicated to you prior to the order shipping back.

This balance will need to be paid before the shipping of the order.

Reviews

There are no reviews yet.

Be the first to review “Gauntlet Barrel Chambering Correction”

You may also like…

  • G30 Barrel Shorten and Recrown
    $110.00

    For G30 and G30SL

    G30 Barrel Shorten and Recrown
    $110.00

    Service to reduce barrel length removing the barrel choke making the barrel better for slugs.

    Select options
  • $110.00
    Gauntlet Barrel Tune
    $110.00

    This service is for all Umarex Gauntlets regardless of generation or caliber. Including all .177, .22, .25 and .30 caliber versions.

    Service to increase the airflow of the air rifle to allow for better power, performance, and efficiency. Barrel transfer port increased, Barrel leade is properly set & polished, Bore is lapped and polished, and the crown is machined and polished.

    Select options

Related products

  • HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00
    HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00

    Part fits either the original Gauntlet or the Gauntlet 2

    You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

    Air Stripper comes with o-ring and silicone grease for installation.

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options
  • Bipod and Picatinny Rail
    $15.00 – $70.00
    Bipod and Picatinny Rail
    $15.00 – $70.00

    Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.