Parts

  • Notos Barrel ServiceNotos Barrel Service
    $110.00

    Barrel Service Notos

    Notos Barrel Service
    $110.00

    Notos Barrel Service

    This is what we do to our Haji-Notos Custom Builds. but you can have the same service performed on your Notos barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.

    You ship us your Notos Barrel and we execute the following:

    • Remove the fixed molded plastic suppressor (the suppressor is destroyed in the process).
    • Increase and polish the barrel transfer port.
    • Two new barrel o-rings are provided.
    • Clean up and polish the barrel crown.
    • 1/2 x 20 UNF Threaded Adapter Included.
    • Barrel Shroud End Cap and Barrel Guide Included.
    • Thoroughly clean and silicone barrel bore.

    Notos Barrel Removal

    Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.

    Shipping

    When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your barrel for modification.

     

    Select options
  • Sold out!
    FX/DonnyFL 1.36 x 5 inchesFX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page
  • TacVenger DIY KIT CUSTOMTacVenger DIY KIT CUSTOM
    From $125.00

    This Builder Starts With the Tactical Adapter

    TacVenger DIY KIT CUSTOM
    From $125.00

    This is where you can build your own TacVenger Kit to install on your existing Avenger.

    Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

    The Kit Starts with the Buck Rail Tactical Grip Adapter.

    then you simply add the items you want in your kit and you are all set!

    The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

    Select options
  • Sale!
    0.30L M18 Thread Carbon Fiber Tank0.30L M18 Thread Carbon Fiber Tank
    Price range: $125.00 through $130.00

    300CC 4.5K PSI M18 Threaded CF Tank

    0.30L M18 Thread Carbon Fiber Tank
    Price range: $125.00 through $130.00

    Features

    • Lightweight High Pressure Carbon fiber Cylinder
    • 300cc/0.30L capacity
    • Available in Gloss Or Matte
    • 251mm x 55mm
    • M18 Threaded

    Shown Below On the HajiNotos

    Select options This product has multiple variants. The options may be chosen on the product page
  • Tatsu 1.6 x 4.25 inchesTatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Gauntlet Short Shroud ComboGauntlet Short Shroud Combo
    Price range: $130.00 through $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    Price range: $130.00 through $215.00

    Part fits Gauntlet 1 or Gauntlet 2 .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

     

    Select options This product has multiple variants. The options may be chosen on the product page
  • Sale!
    Huben Power Black Hawk ProHuben Power Black Hawk Pro
    Original price was: $150.00.Current price is: $130.00.

    User adjustable M18 regulator

    Huben Power Black Hawk Pro
    Original price was: $150.00.Current price is: $130.00.

    The Huben Power Black Hawk Pro is a very stable, high-flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to what is required for the application. The quality of materials and craftsmanship is top-tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.

    Works with but is not limited to the following:
    Umarex Gauntlets, Skout Evo 30, Skout Evo 25, and Skout Epoch 22

    FEATURES

    • Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
    • Streamline and slim structural design
    • Thread: Bottle = M18*1.5 and PCP = G1/2-14
    • Max up to 4500psi high-pressure gauge input.
    • Regulating output pressure range 500psi~3000psi
    • Comes with a standard 8mm quick disconnect male foster fitting for filling.
    • Dust caps may be green or black at random.
    • The regulator has a high airflow rate, is lightweight, easy to operate, rebuildable, and designed for use with HPA/CO2.
    • Please note: When storing high-pressure for a long period of time, creep phenomenon (an increase in output pressure) may occur. After the creep phenomenon occurs, the original output pressure will be restored after one shot.

    SKOUT USERS*
    This regulator does not have a pin on the top of the regulator. This means EPOCH owners are ok, but EVO cannot use this regulator.

    Select options
  • 0.30L M18 Thread Carbon Fiber Tank Short
    $135.00

    300CC 4.5K PSI M18 Threaded CF Tank Short

    0.30L M18 Thread Carbon Fiber Tank Short
    $135.00

    Features

    • Lightweight High Pressure Carbon fiber Cylinder
    • 300cc/0.30L capacity
    • Matte Finish
    • 196mm x 62mm
    • M18 Threaded

     

     

    Select options
  • Gauntlet Tactical Combo BuilderGauntlet Tactical Combo Builder
    138 to 338

    Build your own Tactical Gauntlet Kit

    Gauntlet Tactical Combo Builder
    138 to 338

    Gauntlet Tactical Builder!

    If you just want the Tactical Grip Adapter Product Page, Click HERE

    You select the parts you wish to add to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

    The builder starts with the Grip Adapter, fore grip, and included pistol grip.

    Installation video is listed below

    The Video Starts with the rear trigger group screw removed. To install the M5x20 fastener shown in the video, the fastener must be removed.

    Select options
  • Ninja High Pressure 5/8"-18UNF Custom Output Regulator
    $144.95

    Ninja X Reg Custom Output Regulator up to 3100psi

    Ninja High Pressure 5/8″-18UNF Custom Output Regulator
    $144.95

    This is a genuine Ninja Paintball High Pressure X reg in 5/8″-18UNF thread that can be used on 3000PSI or 4500PSI.

    We do include the ball/pin and spring, should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off the PCP. This is a paintball thing and should not be used in HPA.

    You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

    Read more on the subject in the following ARTICLE.

    This is a direct replacement for the regulator found on the Gauntlets G1, G2, and G30 Caliber

    Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.
    Select options This product has multiple variants. The options may be chosen on the product page
  • UX/Ninja X-Reg ON 13ci 3K CylinderUX/Ninja X-Reg ON 13ci 3K Cylinder
    $145.00

    Ninja 13ci 3000PSI Air Tank with UX/Ninja X Reg

    UX/Ninja X-Reg ON 13ci 3K Cylinder
    $145.00 

    This is a fully serviceable Ninja X-Reg that was produced for UX. We build it to your selected custom output pressure and we mount it on an aluminum 13ci bottle that holds 3000PSI. 
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator
    Select options This product has multiple variants. The options may be chosen on the product page
  • Sumo 1.6 x 6.25 inches
    $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.