FX No Limit Scope Rings 1″, 30mm and 34mm

FX No Limit Scope Rings 1", 30mm and 34mm
FX No Limit Scope Rings 1", 30mm and 34mm - Image 2
FX No Limit Scope Rings 1", 30mm and 34mm - Image 3
FX No Limit Scope Rings 1", 30mm and 34mm - Image 4
FX No Limit Scope Rings 1", 30mm and 34mm - Image 5
FX No Limit Scope Rings 1", 30mm and 34mm - Image 6
FX No Limit Scope Rings 1", 30mm and 34mm - Image 7
FX No Limit Scope Rings 1", 30mm and 34mm - Image 8
FX No Limit Scope Rings 1", 30mm and 34mm - Image 9

Price range: $79.00 through $99.00

FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

You will want these rings if you are planning on using my Expanded Magazine.

SKU: HPAFXNL30 Categories: , , , ,

Description

The FX No Limit scope mount has so many more benefits than the average user can appreciate. They are available in Dovetail which is a perfect match for the Gauntlet.

Some of the major benefits are:
* They allow you to optically center your scope and only use the turrets to fine adjust to the POI.
* They allow you to mount any sized objective lens you want.
* They give you the ability to eliminate any barrel droop scenarios that you may have on an airgun as you are able to independently raise or lower either mount.
* Last and not least, these mounts allow to gain substantial minutes of angle for long-range shooting without exposing your scopes elevation turret adjustment to its maximum.

Additional information

Weight 7 oz
Dimensions 8 × 4 × 1 in
Tube/Rail Option

34mm/Dovetail, 34mm/Picatinny, 30mm/Dovetail, 30mm/Picatinny, 1"/Dovetail, 1"/Picatinny

Reviews

There are no reviews yet.

Be the first to review “FX No Limit Scope Rings 1″, 30mm and 34mm”

Related products

  • HP Strip Stak Pak for PP750HP Strip Stak Pak for PP750
    $45.00
    HP Strip Stak Pak for PP750
    $45.00

    Strip Stak Pak for the Artemis PP750
    A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
    Air Stripper comes with o-ring and silicone grease for installation.  Not available for Canada

    Select options This product has multiple variants. The options may be chosen on the product page
  • HP Baffle Stack For Umarex Gauntlet
    $20.00
    HP Baffle Stack For Umarex Gauntlet
    $20.00

    Part fits either the original Gauntlet or the Gauntlet 2

    THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Umarex Gauntlet Tune O-ring Kit -NO-RINGUmarex Gauntlet Tune O-ring Kit -NO-RING
    Price range: $15.00 through $26.00

    For G1 G2 & G30 Variants

    Umarex Gauntlet Tune O-ring Kit -NO-RING
    Price range: $15.00 through $26.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes two of my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options This product has multiple variants. The options may be chosen on the product page

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.