Parts

Price range: $22.00 through $23.00
Ninja Reg Rebuild Kit
Ninja X and Flex Reg Rebuild Kit
Price range: $22.00 through $23.00
This Kit Contains All Of The Most Consumable Parts in a Ninja X Reg, Ninja ProV2, and Flex Variants
The Small section of the piston is 7.90mm in diameter.
- 1 – User-selectable Burst Disk (1.8k, 3k, 5k, 7.5k
  
  2 – Upper Small Piston O-Ring (Small Piston Kit)
  
  2 – Upper Large Piston O-Ring (Large Piston Kit)
  
  1 – Small Lower Large Piston O-Ring
  
  2 – Regulator Bonnet O-Rings
  
  1 – Fill port o-ring
  
  1 – Piston Lower Ball Seat
It is strongly recommended that you open your egulator to determine which piston size you have. Below is a photo of both common Ninja Piston sizes side by side.
Select options This product has multiple variants. The options may be chosen on the product page
$23.00
AR Pistol Grip
Magpul Beaver Tail Grip
$23.00

A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

Material: Dupont Zytel 30% glass filled nylon

Made in the USA

Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 5000psi WHITE
24MM Mini Gauge 5K (WHITE)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 5000psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 3500psi COLOR
24MM Mini Gauge 3.5K (COLOR)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 3500psi PCP gauge.

Fits Ninja Paintball Regulators

Color-coded areas on the pressure gauge dial do not necessarily correspond to the safe operating pressure range of the device on which the gauge is installed. The user must observe the device’s specified maximum pressure limits.

Select options
Sold out!
Original price was: $45.00.Current price is: $24.00.
8mm Threaded 6000psi mini gauge
24MM Mini Gauge 6K
Original price was: $45.00.Current price is: $24.00.

Small 8mm threaded 6000psi PCP gauge.

Fits Avenger PCP

Color-coded areas on the pressure gauge dial do not necessarily correspond to the safe operating pressure range of the device on which the gauge is installed. The user must observe the device’s specified maximum pressure limits.

Read more
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
Sale!
Price range: $25.00 through $35.00
Includes G1, G2, G30, G2SL, & G30SL variants
HP Barrel Band For Umarex Gauntlet
Rated 4.67 out of 5
Price range: $25.00 through $35.00

Available in the classic Picatinny rail version or the 15mm thick rail less version.

Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Price range: $25.00 through $35.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Stock Barrel)
Price range: $25.00 through $35.00
** THIS BARREL BAND IS FOR THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE – CLICK HERE IF YOU HAVE THE HAJIMOTO MODIFIED BARREL**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with stock barrel suppressor installed.
Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Price range: $25.00 through $30.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Modded Barrel)
Price range: $25.00 through $30.00
** THIS BARREL BAND IS FOR THE HAJIMOTO MODIFIED BARREL – CLICK HERE IF YOU HAVE THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE. CLICK HERE IF YOU HAVE THE FX BARREL WITH 22MM SHROUD INSTALLED**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with a Hajimoto modified barrel installed.
Select options This product has multiple variants. The options may be chosen on the product page
$27.00
5 Piece Stak Pak W/Spring
Barra 1100z Stak Pak W/Spring
$27.00

Only fits the 19.25″ barrel length version. Middle to late 2023 produced 1100Z barrels were increased in length to 22.25″ eliminating the free space that used to allow a spring and baffles to fit.

Help quiet down your Barra 1100z with our custom-fit HP 5-piece Baffle Stak and tension spring. There are two different-sized baffles to help eliminate patterned harmonics in the air stream.

Select options
$27.95
UX 6000PSI GAUGE
Umarex 6K Gauge
$27.95

This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

This gauge will not fit the Ninja Paintball Version Regulator, nor does it fit the Notos

Color-coded areas on the pressure gauge dial do not necessarily correspond to the safe operating pressure range of the device on which the gauge is installed. The user must observe the device’s specified maximum pressure limits.

Select options
$28.00
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5
$28.00

Part fits either the original Gauntlet or the Gauntlet 2

You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

Air Stripper comes with o-ring and silicone grease for installation.

Select options This product has multiple variants. The options may be chosen on the product page