Parts

  • Butt Stock
    $28.00

    Adjustable Butt Stock

    Butt Stock
    $28.00

    Buttstock Assembly, 6 Position, Mil Spec, Carbine, Black

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options This product has multiple variants. The options may be chosen on the product page
  • Buffer Tube with Castle nutBuffer Tube with Castle nut
    $30.00

    Tube and Nut

    Buffer Tube with Castle nut
    $30.00

    Made in the USA Mil Spec buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock

    Select options
  • Sold out!
    Oil Water Separator Cartiridge
    $30.00
    Oil Water Separator Cartiridge
    $30.00

    Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.

     

    Read more
  • Sold out!
    Saber Tactical Tank Valve adapterSaber Tactical Tank Valve adapter
    $30.00

    From 7/8″-14 to M18x1.5

    Saber Tactical Tank Valve adapter
    $30.00

    This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks.

    Read more
  • Notos Expanded MagazineNotos Expanded Magazine
    $30.00

    Haji-Notos Mag 11 rounds

    Notos Expanded Magazine
    $30.00
    Introducing the Haji-Notos 11 Shot Expanded Magazine!

    This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

    Please note that our design loads from the right.

    Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

    The Haji-Notos magazine is compatible with a red-dot or optic, but it does not work with Umarex fixed fiber optic sights. Please note that the actual finish may differ from that shown in the photos.

    LOADING THE NOTOS MAGAZINE

    Select options
  • 13ci 3K PSI TANK
    $30.00

    Small 13ci (213cc) 3000psi

    13ci 3K PSI TANK
    $30.00

    A 3000psi 13ci (213cc) aluminum paintball style tank.
    This is an industry standard 5/8″- 18 threaded bottle with a flat bottom.

    This is the same bottle installed on the Original Gauntlet 1 in .177, .22 or .25 caliber PCP as shown below.

    Airgun is not included

    Select options
  • Sale!
    Notos Bottle Converted - Barrel Band (FX Barrel)Notos Bottle Converted – Barrel Band (FX Barrel)
    Price range: $30.00 through $40.00

    300 or 360cc Tank W/Rail or Without Rail

    Notos Bottle Converted – Barrel Band (FX Barrel)
    Price range: $30.00 through $40.00
     ** THIS BARREL BAND IS FOR THE FX BARREL KIT WITH 22MM SHROUD – CLICK HERE IF YOU HAVE THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE, OR CLICK HERE IF YOU HAVE A HAJIMOTO MODIFIED BARREL**
    Available with or without Picatinny rail:
    • 360cc/036L version
    • Adds the necessary support and rigidity of the long bottle conversion assembly.

    The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to sit at the end of the cylinder, as shown, and features a section of Picatinny rail on the bottom to accommodate the attachment of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod FOR standing rests.

    This Barrel band is specifically designed for an Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with an FX barrel installed.

    Select options This product has multiple variants. The options may be chosen on the product page
  • HP Gauntlet Mini MagHP Gauntlet Mini Mag
    $33.00

    Gauntlet Mini Magazine

    HP Gauntlet Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The old lidless design is being phased out. As inventory is exhausted, we will switch to the new magnetic lid style, as shown for the .177 and.22 caliber versions.

    Fits all generations of Gauntlet

    New Magnetic Lid Design! Smooth and reliable magazine that is shorter to allow a fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 caliber. It extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″)

    This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Features

    • An easy to load.
    • Easy partial fill design.
    • .177 = 16 shots.
    • .22 = 13 shots
    • .25 = 11 shots
    • The magazine height is 40.90mm (1.610″ )

     

    Select options This product has multiple variants. The options may be chosen on the product page
  • HP MROD Mini MagHP MROD Mini Mag
    $33.00

    Benjamin Marauder Mini Magazine

    HP MROD Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but is slightly shorter to allow the magazine to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Benjamin Marauder in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots between reloads. The magazine’s operation is smoother and offers a more reliable chambering of rounds.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • Easy-to-load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = Holds 13 shots (Stock Mag Holds 10 Shots)
    • .25 = Holds 11 shots (Stock Mag Holds 8 Shots)
    • The magazine height is 40.90mm (1.610″ a little less than 1-5/8″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options This product has multiple variants. The options may be chosen on the product page
  • HP Avenger Mini MagHP Avenger Mini Mag
    $33.00

    Avenger/Origin Mini Magazine

    HP Avenger Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .25 = 11 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)
    • Mags also fit the Avenger Bullpup II

    Please note that the actual finish may differ from that shown in the photos.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options This product has multiple variants. The options may be chosen on the product page
  • Hajimoto's Beeman 1358 Mini MagazineHajimoto’s Beeman 1358 Mini Magazine
    Price range: $33.00 through $35.00

    Beeman 1358 Mini Magazine

    Hajimoto’s Beeman 1358 Mini Magazine
    Price range: $33.00 through $35.00
    Introducing the HP Mini Magazine.

    New magnetic lid design! This magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    Removeable magnetic lid allows you to drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .177 = 18 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)

    Please note that the actual finish may differ from that shown in the photos.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options This product has multiple variants. The options may be chosen on the product page

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.