Additional information
| Weight | 60 oz |
|---|---|
| Dimensions | 24 × 12 × 4 in |
$75.00
Notos Internal Porting
This service provides increased airflow and efficiency of the internal pathways, resulting in more power capability.
This is what we do to our Haji-Notos/Notos G2 Custom Builds, but you can have the same service performed on your Notos as well. We increase the internal transfer ports, which results in greater airflow and more power. This service also includes a trigger sear face polish to make the trigger feel much smoother.
Ship us your complete Notos/Notos G2, or just the action with the stock and barrel removed, and we’ll perform the service.
If you want to minimize shipping costs and you elect to ship just the action, follow the instructions below.
If you are shipping your complete Notos, ignore the instructions below and use your original Notos Box to ship your Notos.
Your barrel is easily removed by removing the 2.5mm pan-head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm pan-head screw is removed, there is a 2mm set screw below it that holds the barrel in the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.
Shipping
Shortly after you place your order for the service, we send you a notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information to ship us your barrel/action/PCP for modification.
Please keep in mind that if you have multiple services executed, you will be better served using our Builder service option, because it groups the services, resulting in only one shipping cost.
| Weight | 60 oz |
|---|---|
| Dimensions | 24 × 12 × 4 in |
You must be logged in to post a review.
Barrel Service Notos/Notos G2
Notos/Notos G2 Barrel Service
This is what we do to our Haji-Notos/Notos G2 Custom Builds. but you can have the same service performed on your Notos/Notos G2 barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.Â
Notos G2 Important note: The barrel conversion will not allow you to use your stock pressure tube. You will need to bottle convert your Notos G2.
You ship us your Notos/Notos G2 Barrel and we execute the following:
Notos Barrel Removal
Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below (or 2 2.5mm screws for the Notos G2) it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.
Shipping
When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information and service order number required for you to ship us your barrel for modification.
Huben Power Dream-Notos/Notos G2 TK with 0.30L, 0.36L, 0.50L CF Tank
Fits the Umarex Notos and the Notos G2
Genuine Huben Power Dream-Notos TK mounted on a .30L (300cc) 0.36L (360CC) or .50L (500cc)
A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.
FEATURES
While not 100% required, a barrel band is strongly recommended to carry the weight of the plenum, regulator, and cylinder assembly. This eliminates placing all of the lateral load on a small mechanical connection at the plenum to action interface.
See details below
Haji-Notos Mag 11 rounds
This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.
Please note that our design loads from the right.
Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.
The Haji-Notos magazine is compatible with a red-dot or optic, but it does not work with Umarex fixed fiber optic sights. Please note that the actual finish may differ from that shown in the photos.
LOADING THE NOTOS MAGAZINE
Reg Pressure Tester
High quality HubenPower reg tester.
Features
Don’t guess what the output of your regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.
Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.

Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
for .177, .22 and .25 NOT .30

Part fits Gauntlet 1 or Gauntlet 2 .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber
Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.
If Your Gauntlet is:
Copyright All rights reserved Hajimoto Productions LLC 2026
Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.All products offered on our website are intended for airgun use only. Federal law prohibits using a product in any way not consistent with its intended use. It is the purchaser's responsibility to know and comply with all applicable state, county, and local laws and ordinances. Dismiss
Reviews
There are no reviews yet.