Additional information
| Weight | 32 oz |
|---|---|
| Dimensions | 14 × 2 × 2 in |
| NOTOS VERSION | NOTOS, NOTOS G2 |
Barrel Service Notos/Notos G2
$110.00
Notos/Notos G2 Barrel Service
This is what we do to our Haji-Notos/Notos G2 Custom Builds. but you can have the same service performed on your Notos/Notos G2 barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.Â
Notos G2 Important note: The barrel conversion will not allow you to use your stock pressure tube. You will need to bottle convert your Notos G2.
You ship us your Notos/Notos G2 Barrel and we execute the following:
- Remove the fixed molded plastic suppressor (the suppressor is destroyed in the process).
- Increase and polish the barrel transfer port.
- Two new barrel o-rings are provided.
- Clean up and polish the barrel crown.
- 1/2 x 20 UNF Threaded Adapter Included.
- Barrel Shroud End Cap and Barrel Guide Included.
- Thoroughly clean and silicone barrel bore.
Notos Barrel Removal
Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below (or 2 2.5mm screws for the Notos G2) it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.
Shipping
When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your barrel for modification.
You must be logged in to post a review.
Related products
-
$150.00Sumo 1.6 x 6.25 inches
$150.00Select options This product has multiple variants. The options may be chosen on the product pageTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
$28.00HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
$28.00Select options This product has multiple variants. The options may be chosen on the product pagePart fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
-
Price range: $130.00 through $215.00for .177, .22 and .25 NOT .30
Gauntlet Short Shroud Combo
Price range: $130.00 through $215.00Select options This product has multiple variants. The options may be chosen on the product pagePart fits Gauntlet 1 or Gauntlet 2 .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber
Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.If Your Gauntlet is:
- .177 Get a .177/.22 Supressor
- .22 Get a .22/.25 Supressor
- .25 Get a .25/.30 Supressor
Reviews
There are no reviews yet.