Accessories

Sold out!
$40.00
NateChrony SmartTarget
NateChrony SmartTarget Accessories
$40.00

Accessories

The NateChrony SmartTarget has 6 outputs – 1 for addressable LEDs, and 5 programmable outputs. These accessories connect to these outputs to indicate hit detection, shot placement, and can drive external equipment via relay boards.

Short Range LED Kit – Cross

The short range kit features 5 LEDs in a cross shape, with spacing of 50mm. This makes it convenient and compact for shorter ranges, typically 50-100m. It connects directly to the SmartTarget outputs via a supplied 1m cable.
The middle LED will show green on a center hit, red on the outer LEDs when struck at the outer edges, and orange on the outer LEDs when struck between the center and outer edges.
The cross can be mounted to a surface behind the target (to avoid spalling) via tape, bands or zip ties.

Long Range LED Kit – 4+2 LEDs

The long range kit features 4 LED modules (and 2 spare), which are connected to either the 4-connector board or can be daisy-chained to each other, via the supplied 30cm cables and connectors. This allows spacing between LEDs of up to 60cm, ideal for easy recognition at long ranges.
All four LEDs will display green on a center hit, show red when struck at the outer edge, and orange when struck between the center and outer edge.
The LEDs are supplied with quality 3M double sided tape, and are stuck to the rear surface of the target, or another surface behind the target face.

Long Range LED Kit – 10+2 LEDs

This kit is the same style as the 4+2 above, but with more LEDs and larger 10x connector board. This allows for larger and creative designs, with different LED colours and behaviours, such as a doe or buck with highlighted antlers and eyes.

DIY LED Kit – 10+2 LEDs

The ultimate in flexibility – we provide the LED boards and snap connector blocks, you then wire and connect them in any style you want. This is perfect for target makers or people that want to do customise their targets, and really transform a boring target into a fully interactive one.
LEDs will need wires soldered to the boards, however the supplied snap connectors make interconnecting and LED replacements quick and easy. You will also need to mount them using tape, or they can be drilled and screwed into place.

Informational videos below.

Read more
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport polymer air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also includes variable baffle chambers to help reduce both noise and turbulence in the airflow. The result is a more laminar air stream, which reduces projectile instability and, as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is no room for the baffles in the DonnyFL Short Shroud.

Polymer Air Stripper comes with o-ring and silicone grease for installation.

Select options This product has multiple variants. The options may be chosen on the product page
$45.00
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00

Specifically for the AV Avenger

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This part is designed and manufactured by DonnyFL

Select options
$45.00
HP Strip Stak Pak for PP750
$45.00

Strip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada

Select options This product has multiple variants. The options may be chosen on the product page
Sold out!
$45.00
Beeman Underlever 1357 | 1358 Adapter #A86
$45.00

Specifically for the Beeman 1357 / 1358

This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.

This part is designed and manufactured by DonnyFL

Read more
$45.00
Bipod Picatinny
ATLAS LIKE Bipod
$45.00

Atlas Like Bipod

Select options
$45.00
Hatsan QE Big Bore .357/.457 M18x1 Adapter A54 #A54
$45.00

This part is designed and manufactured by DonnyFL

Select options
Sold out!
Original price was: $65.00.Current price is: $45.00.
AR Stock Folder
Side Folding Stock Adapter
Original price was: $65.00.Current price is: $45.00.
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.

FEATURES
- Aerospace grade aluminum. Matte Black Anodized finish.
- Modifiable for pass-through for hammer adjusters.
- Designed to fold to the left but can be made to fold right as well.
- Locks in the open and closed positions*.
- Compatible with AR15 and AR308 extension tubes.
- Works perfectly for the HajiNotos and Tactical Gauntlet Kits.
(* The hinge does have a certain amount of play when locked in either position.)
Read more
$46.00
EagleVision 1/2.3″ 12MM LENS GoPro 2, 3 and 4
GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
$46.00
This Lens fits the GoPro 2, 3 and 4

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/1.8″ version which is a much better lens that allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Select options
$46.00
Notos Full O-ring Kit
Notos Complete O-Ring Kit
$46.00
UMAREX NOTOS FULL ORING KIT 24 PIECE SET
- Complete aftermarket O-ring set for the Notos or Notos G2.
- Includes internal O-rings.
- Includes both internal and external barrel orings.
- Includes silicone grease.
- Enough to replace every O-ring twice.
- Fresh inventory.
- High-quality Dura 70 & Dura 90 where applicable.
Schematic below of all the O-rings contained in this kit
Select options This product has multiple variants. The options may be chosen on the product page
$47.00
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00

UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Avenger

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options This product has multiple variants. The options may be chosen on the product page
$47.00
Origin .22/.25
HP Strip Stak Pak for Origin
Rated 4.33 out of 5
$47.00

NEW ENHANCED DESIGN

UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options This product has multiple variants. The options may be chosen on the product page

UMAREX NOTOS FULL ORING KIT 24 PIECE SET