Notos Full O-ring Kit
$46.00
UMAREX NOTOS FULL ORING KIT 24 PIECE SETÂ Â
                    Â
- Complete aftermarket O-ring set for the Notos or Notos G2.
- Includes internal O-rings.
- Includes both internal and external barrel orings.
- Includes silicone grease.
- Enough to replace every O-ring twice.
- Fresh inventory.
- High-quality Dura 70 & Dura 90 where applicable.
Schematic below of all the O-rings contained in this kit
Additional information
| Weight | 3 oz |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| NOTOS GENERATION | NOTOS, NOTOS G2 |
You must be logged in to post a review.
You may also like…
-
Sale!
Huben Power Dream-Notos/Notos G2 TK with 0.30L, 0.36L, 0.50L CF Tank
Haji-Notos/Notos G2 Power Plant Combo
$265.00 – $365.00Price range: $265.00 through $365.00Select options This product has multiple variants. The options may be chosen on the product pageFits the Umarex Notos and the Notos G2
Genuine Huben Power Dream-Notos TK mounted on a .30L (300cc) 0.36L (360CC) or .50L (500cc)A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.
FEATURES
- Includes ) 0.3L Long, 0.3L Short, 0.36L, or 0.50L 4500psi Carbon Fiber Bottle in Gloss or Matte Black.
- Optional Barrel Band support to provide structural support for the Power Plant.
- Optional Barrel Band fitment available for Stock with OEM suppressor, Hajimoto Notos Modified, or FX Barrel configurations.
- Extremely stable externally adjustable regulator, Output 500psi~3600psi
- Provides over 130 shots.
- Ultra-stable output pressure
- Power Plenum with rotating joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male Foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Power increase is achieved on the fly, but power decrease requires degassing the plenum/PCP.
While not 100% required, a barrel band is strongly recommended to carry the weight of the plenum, regulator, and cylinder assembly. This eliminates placing all of the lateral load on a small mechanical connection at the plenum to action interface.
See details below
-
Sale!
With and Without Rail 300cc, 360cc, 500cc bottle
Notos/Notos G2 Bottle Converted – Barrel Band (Stock Barrel)
$25.00 – $35.00Price range: $25.00 through $35.00Select options This product has multiple variants. The options may be chosen on the product page ** THIS BARREL BAND IS FOR THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE – CLICK HERE IF YOU HAVE THE HAJIMOTO MODIFIED BARREL**


Available in multiple sizes and with or without Picatinny rail (Notos G2 available with rail only):
- 300cc/0.3L Long version
- 300cc/0.3L Short version
- 360cc/036L version
- 500cc/0.5L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from PETG for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.
This Barrel band is specifically designed for a Umarex Notos or the Notos G2 with our HubenPower Dream TKÂ installed with our 300cc, 360cc, or 500cc carbon fiber bottle with stock barrel suppressor installed.
Related products
-
Fits the G1, G2/G2SL or G30/G30SL
Real 2 Stage Trigger for the Gauntlet
Rated 5.00 out of 5$110.00Select optionsFull-fledged 2-stage trigger for the Umarex Gauntlet 1, 2, G30, bolt or sidelever variants. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
- The Trigger Is Stainless Steel 17-4 Through Hardened
- The Trigger Shoe Is Aluminum 6061-T6
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger. -
Hajimoto Tune My Gauntlet G1 or G2
$625.00Select options This product has multiple variants. The options may be chosen on the product pageWe completely tune your supplied Gauntlet 1 or 2 Bolt or SL Version, which includes everything listed in the section below.
The service includes a very detailed, time-consuming incoming inspection report with photos and other relevant information detailing the condition of the airgun and all of its parts. This report is provided to you, and it must be reviewed and authorized for the work to continue.
Ordering procedures:
- Add all services and items to your cart.
- Be sure to use the notes section to communicate any known issues or special instructions.
- Check out.
Shortly after the order is received, you will receive an email notification containing shipping information that will include labeling and packaging requirements.
To better understand how the Gauntlet is transformed from a static you get what you get type of airgun into an adjustable-power and tunable PCP, take a look at this video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition to get it to fly at the best rate of travel for that particular ammunition.
HOW TO ADJUST POWER WITH STKWe will build your order based on the information provided from the questionnaire as well as any specific requests, and before the airgun ships, any credits or additional charges will be settled.
-
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00Select options This product has multiple variants. The options may be chosen on the product pageThis part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.
The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same













Reviews
There are no reviews yet.