Accessories

  • Avenger Bottle Conversion - Barrel BandAvenger Bottle Conversion – Barrel Band
    $35.00

    Air Venturi Avenger Bottle Conversion Barrel Band

    Avenger Bottle Conversion – Barrel Band
    $35.00
    Available in two sizes:
    • Small 59-61.5mm Diameter CF Tank (Typically fits 0.35L (350cc), 0.36L (360cc), 0.42L (420cc), 0.45L (450cc), 0.50L (500cc), & 0.70L (700cc) cylinders)
    • Large 62-63mm Diameter CF Tank (Typically fits: 0.38L (380cc), 0.48L (480cc) & 0.58L (580cc) Cylinders)

     ** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **

    The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

    This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.

    Select options This product has multiple variants. The options may be chosen on the product page
  • HP MROD Exp MagHP MROD Exp Mag
    $35.00

    The MROD, Expanded Magazine

    HP MROD Exp Mag
    $35.00

    Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    New magnetic lid. This magazine fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it.

    Features

    • Redesigned magnetic lid design available for .177, .22, and in .25 calibers now.
    • Drop in loading.
    • Easy partial fill design.
    • .177 – 21 shots, an increase of 110% over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .22 = 17 shots, an increase of 70% more shots over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .25 = 14 shots which is an increase of  almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options This product has multiple variants. The options may be chosen on the product page
  • Hajimoto's Airacuda, Expanded MagazineHajimoto’s Airacuda, Expanded Magazine
    Price range: $35.00 through $40.00

    Airacuda & Airacuda Max .22/.25

    Hajimoto’s Airacuda, Expanded Magazine
    Price range: $35.00 through $40.00

    Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
    • The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
    • Available in right-side loading for the .22 caliber soon to come for the .25 cal.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options This product has multiple variants. The options may be chosen on the product page
  • Sale!
    BUCK-RAIL 1/2 X 20 SUPPRESSORBUCK-RAIL 1/2 X 20 SUPPRESSOR
    Price range: $35.00 through $40.00

    Buck Rail Suppressor

    BUCK-RAIL 1/2 X 20 SUPPRESSOR
    Price range: $35.00 through $40.00

    Genuine Buck-Rail Product

    • Designed to be compatible with 1/2-20 UNF male threads
    • Stocked in 177/22, .25, and .30 Caliber Variants
    • 3D printed in Polycarbonate plastic in the US by a veteran-owned business
    • Utilizes high quality EZ Lok steel inserts for extra durable threads
    • 7 cone-shaped interior baffle design with large muzzle exit expansion chamber
    • Dramatically reduces the report without diminishing accuracy or muzzle velocity

    Note: Photos that show a part installed are for reference only. The product shown does not include the airgun or the adapter. This listing is for the suppressor only.

    Select options This product has multiple variants. The options may be chosen on the product page
  • UMAREX N2 REGULATOR/ADAPTERUMAREX N2 REGULATOR/ADAPTER
    $39.99

    N2 Adapter to 5/8″ Thread Like Gauntlet

    UMAREX N2 REGULATOR/ADAPTER
    $39.99

    The Umarex NitroAir system is an idea the sport shooting world has been waiting for.

    The Umarex NitroAir system is an idea the sport shooting world has been waiting for. PCP airgunning is the best way to shoot a pellet rifle, but without a way to fill it, they can be useless. Even the best airgun compressors can fail and usually at the worst possible time. What if you had a way to bypass the downtime for a quick fix? With the N2 Adapter, you can easily thread on a NitroAir cartridge for use with your Gauntlet or similar air rilfe. Handy as a backup or for small game hunts in the field. Without a pump, without a compressor, you are back in the game. The Umarex Airguns N2 Adapter has M16x1.5 threads on the nitrogen end and 5/8-18 on the regulator end.

    Select options
  • Umarex Gauntlet 1/2 x 20 adapter #A23Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    For the Gauntlet 1 or 2

    Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    This part is designed and manufactured by DonnyFL

    Select options
  • Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00

    Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

    This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

    If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

    This part is designed and manufactured by DonnyFL

    Select options
  • Hatsan Blitz M18X1 Adapter A117Hatsan Blitz M18X1 Adapter A117
    $40.00
    Hatsan Blitz M18X1 Adapter A117
    $40.00

    This part is designed and manufactured by DonnyFL

    This adapter allows you to screw on an airgun suppressor with M18x1 threads.

    Select options
  • Sold out!
    Benjamin Akela/Kratos 1/2 x 20 Adapter A8
    $40.00

    1/2 x 20 UNF Adapter for Akela/Kratos

    Benjamin Akela/Kratos 1/2 x 20 Adapter A8
    $40.00

    Fits the Benjamin Akela and Kratos PCP’s

    This part is designed and manufactured by DonnyFL

    Read more
  • Sold out!
    HP Strip Stak Pak for Akela/KratosHP Strip Stak Pak for Akela/Kratos
    $40.00

    Akela/Kratos Strip Stak Pak

    HP Strip Stak Pak for Akela/Kratos
    $40.00

    INCLUDES NEW ENHANCED AIR STRIPPER DESIGN
    For .177 and .22 Caliber Only

    Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
    A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle.

    The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
    The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.     

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Read more
  • Benjamin 1/2 x 20 adapter #A7Benjamin 1/2 x 20 adapter #A7
    $40.00

    Marauder, Armada and Fortitude

    Benjamin 1/2 x 20 adapter #A7
    $40.00

    This part is designed and manufactured by DonnyFL

    Select options
  • Sold out!
    Umarex Hammer M18x1 Shroud Adapter A60
    $40.00

    Hammer Adapter

    Umarex Hammer M18x1 Shroud Adapter A60
    $40.00

    This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

    This adapter does not fit on the Umarex Hammer Carbine.

    Read more

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.