NateChrony V2

Chronograph by Nate
Sale!

Chronograph by Nate

$125.00 – $130.00

The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles. It is accurate, affordable, super easy to use, and best of all – no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.
Using your mobile phone as the screen and battery, means you get the best display on the market and never get surprised by a flat battery in your Chronograph.

The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, and has four additional save slots – all of which retain the data when power is lost. You can configure pellet weight, display hold time, and adjust the NateChrony readings to match another Chronograph.

 

Specifications

Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
Resolution: <0.1fps shot to shot at 1,000fps
Air powered guns only
CO2 power can cause vapour, not recommended
Maximum caliber: ~45-50 cal (depending on power)
Maximum power: 150 fpe

Clear
SKU: HPNTCHNY Categories: , , , , , , Tags: , , , ,

Description

Requirements:

You'll need this stuff to use the NateChrony – typically if you have a mobile phone you're set!

  • If using a mobile phone/tablet, it should be less than 5 years old & up to date
  • Working knowledge of your device, including browser and internet technologies
  • Working knowledge of any additional security software installed on your device
  • A 5v standard USB power source
  • A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
  • A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
  • You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readout

Included with the NateChrony:

The Chronograph: The thing you pop on the end & shoot through
Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connector
The Software: Either the standard software, or the Airsoft version of software
Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
Safety Carabiner: Allows you to secure the chrony for added safety or convenience
Soft Case: A carrying pouch to put it in
Test Pellet: A plastic pellet for the drop test
Phillips Driver: A phillips driver for the adapter grub screw.

SET UP VIDEO

Additional information

Weight 6 oz
Dimensions 5.5 × 3.25 × 1.5 in
ALUMINUM FINISH

BLACK, STONE, GOLD

Reviews

There are no reviews yet.

Be the first to review “NateChrony V2”

Related products

  • Sold out!
    $60.00
    DISCONTINUED
    HP Strip Stak Pak for Evanix Air Speed
    $60.00

    Evanix Air Speed Air Stripper and Baffle Stack _
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • HP Strip Stak Pak for Avenger
    $47.00

    Air Stripper, Tension Spring and Baffle Stack

    HP Strip Stak Pak for Avenger
    $47.00

    UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Avenger

    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options
  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.