Regulators & Tanks

All things high pressure. Regulators, tanks, and bottles.

All things high pressure. Regulators, tanks, and bottles.

All things high pressure. Regulators, tanks, and bottles.

  • Fill Port O’ring Fits Ninja
    $4.00

    Ninja fill port o’ring

    Fill Port O’ring Fits Ninja
    $4.00

    5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators

    Select options
  • Tank to PCP O-rings (10 Pak)
    $8.00
    Tank to PCP O-rings (10 Pak)
    $8.00

    10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT

    Select options
  • Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
    $9.95

    Burst Disk Two Pack

    Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
    $9.95

    • 1.8k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
    • 3k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
    • 5k burst disk is used as the high-pressure burst disk on 3k tanks
    • 7.5k burst disk is used as the high-pressure burst disk on 4.5k tanks

    Actual burst disk finish may be Black, or Bright depending on availability. The Flex Reg Above is an example of 5K and 7.4K Burst Disks.

     

    The Flex Reg Above is an example of 5K and 7.5K Burst Disks.

    Select options
  • Sold out!
    Ninja Magna Cap Fill Nipple Cover – BLACK
    $17.00
    DISCONTINUED
    Ninja Magna Cap Fill Nipple Cover – BLACK
    $17.00

    Patented Magnetic design Lightweight Aluminum Helps to keep the dirt out!

    MADE IN THE USA!!!!

    Read more
  • Umarex Gauntlet Regulator Shim Pak
    $18.50
    Umarex Gauntlet Regulator Shim Pak
    $18.50

    Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

    I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

    The shim kit contains:

    • 2 – #5 Shims.
    • 1 – #3 Shim.
    • 2 – #2 Shims.
      (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

    To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
    To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
    The included two #2 shims are for minor adjustments if you have a finicky regulator.

    DETAILED LESSON/EXAMPLE:
    Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

    Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

    You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

    If you rapid fill, there is a good chance you will pop your burst disc.

     

    Select options
  • $21.95
    Ninja Regulator Rebuild Kit Part #NINJARBK
    $21.95

    Ninja Paintball Tank Regulator Replacement Part #NINJARBK – Rebuild Kit for Ninja NON Pro Regulators.

    User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

    Select options
  • $21.95
    Ninja PRO V2 Regulator Rebuild Kit Part #PRORBK
    $21.95

    Ninja Paintball Tank Regulator Replacement Part #PRORBK – This Rebuild Kit for Ninja Pro V2 Regulators ONLY.

    Like the one below:


    This rebuild kit is not for the Umarex Gauntlet Stock Regulator.

    User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

    Select options
  • 3000PSI 1/8″ NPT Pressure Gauge
    $21.95

    3/4″ Black face 3000PSI gauge

    3000PSI 1/8″ NPT Pressure Gauge
    $21.95
    • 1/8″ NPT THREAD
    • 3000PSI DIAL MAX
    Select options
  • Ninja Black Mini Gauge
    $21.95

    Mini 5000PSI face

    Ninja Black Mini Gauge
    $21.95

    Ninja Paintballs mini pressure gauge.

    Face is black and the dial reads to 5000PSI

     

    Select options
  • Ninja Paintball Universal Fill Adapter
    $21.95

    Ninja UFA

    Ninja Paintball Universal Fill Adapter
    $21.95

    The Ninja UFA (Universal Fill Adapter) is for Remote Coils, CO2 Fill Stations, Regulator testers, and more!

    This unit also allows you to release air from any paintball tank safely for travel, maintenance, and testing. The Ninja UFA is what Hajimoto Productions uses in its complete Paintball Regulator Tester and comes with a large-faced gauge for easy reading.

    Select options