Description
Features:
- 5000psi Working Pressure
- 1/8 NPT Female Threads
- Durable for scuba-fill station and Remote Hose.
- All-Black Tactical look
- Made in the USA
NINJAMQD
$15.95
The Ninja QD Quick Disconnect Female Coupler 1/8 NPT provides a fast, simple, and leak-free connection and disconnection point for pressurized air lines, typically in High-Pressure Air (HPA) systems for paintball.
• Quick and Easy Operation: Allows users to connect and disconnect air hoses or remote lines by hand without the need for tools. This is especially useful for quickly swapping components like different guns using one air system, or removing a remote line from an HPA tank.
• Secure, Leak-Free Seal: When connected with a compatible male plug, the fitting uses a ball-latching mechanism and internal O-rings to form a secure, high-pressure seal, preventing air leaks during operation.
• Durability: The coupler is made of durable materials with a black coating and withstands high pressures, commonly rated for up to 5000 psi.
• Standard Compatibility: The 1/8 NPT (National Pipe Taper) female thread allows it to adapt to a wide range of components that have a male 1/8 NPT thread, such as remote lines or fill station adapters.
3 in stock
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 2 × 1 × 1 in |
You must be logged in to post a review.
Related products
-
$21.95Mini 5000PSI face
Ninja Black Mini Gauge
$21.95Select options
Ninja Paintballs mini pressure gauge.
Face is black and the dial reads to 5000PSI
Color-coded areas on the pressure gauge dial do not necessarily correspond to the safe operating pressure range of the device on which the gauge is installed. The user must observe the device’s specified maximum pressure limits.
-
Price range: $110.00 through $175.00PCP Air Compressor Filter 4500psi Oil Water Separator
Price range: $110.00 through $175.00Select options This product has multiple variants. The options may be chosen on the product pageA quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.
Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.
Made from high-quality aircraft aluminum and is rated for safe use.
Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.
Available with a 47″ high-quality stainless steel fitting hose to allow for convenient filling of your PCP.
-
Price range: $310.00 through $325.00Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
Price range: $310.00 through $325.00Select options This product has multiple variants. The options may be chosen on the product pageIntroducing a Hajimoto Productions Exclusive offer!
13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSIInstalls on the Gauntlet with minor tank shroud modifications.
A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
Reviews
There are no reviews yet.