Optics, Camera, Scopes & Mounts

Scopes, scope cameras, scope rings and mounts, bubble levels and focus wheels.

Sold out!
Original price was: $11.00.Current price is: $7.50.
clamps onto 20mm Pic Rail
Picatinny Rail Anti-cant level
Original price was: $11.00.Current price is: $7.50.

Bubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount

Read more
$12.00
Battery for Firefly 8SE Camera
$12.00

Description:
1.This Li-ion Battery is designed for the Hawkeye Firefly 8S 8SE Camera

Select options
Sale!
Original price was: $18.00.Current price is: $12.50.
Open Door for Firefly 8SE Case
Original price was: $18.00.Current price is: $12.50.

Description:
This skeletonized rear door allows you to use your touch screen without opening the case.

Direct replacement no modifications required.

It is recommended that you remove the white silicone gasket on the door so it is easier to close and does not impart too much stress on the hinges or the latch assembly. After all, we are not trying to achieve a waterproof assembly anyway.

*Firefly camera is not included and is shown for reference.

Select options
$13.00
Fits Notos / HajiNotos
NOTOS FIBER OPTIC SIGHTS
$13.00
The Umarex Notos was designed to be flexible to your shooting needs. The Notos has plenty of accessory rail on the top side of the rifle allowing shooters to install the optic of their choice or, a set of fixed sights. The high-contrast Fiber Optic elements pick up plenty of available light for quick accurate shooting in all lighting conditions. These Fiber Optic sights can be installed in just minutes.
Umarex Notos Fiber Optic Sights

Front and Rear Fiber Optic Sights

Compatible with Umarex Notos PCP Airgun

NOT COMPATIBLE WITH HAJIMOTO MAGAZINE FOR THE NOTOS
Select options
$14.00
Aluminum Latch for Firefly Case
$14.00

Aluminum Latch Buckle for camera case

Description:
A direct replacement camera case latch buckle but made from aluminum.

This is my aluminum CNC’d camera case latch replacement. Eventually, the lightweight plastic latch that comes on the Firefly Camera case fails and that means your camera is not held in place and you are not able to record your shots through your scope camera assembly. This part requires your original wire hinge piece which typically never breaks.

CLEAR CAMERA CASE NOT INCLUDED. LATCH ONLY

Select options
Sold out!
$14.00
Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00

Zero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.

Read more
$14.50 – $34.00
Battery Charger for Firefly 8SE
$14.50 – $34.00

Description:
Dual Battery Quick Charger for Firefly 8SE Camera Batteries.

Available in 3 configurations with or without extra camera batteries.

Use a 5V 2A output USB port to charge 2 batteries.

Select options
$15.00
Scope bubble level
Anti-Cant Bubble Level
$15.00
Select options
$20.00 – $27.00
Eaglevision
Eaglevision Tube Adapter Rings
$20.00 – $27.00

This is high quality 30mm to 1″ or 34mm to 30mm scope tube adaptors, made of aluminium.

Designed To Works With All Eaglevision Scope Mounts.

Select options
$20.00
Extra Scope Eyepiece Adapter For the OrionCam
OrionCam Scope Eyepiece Adapter
$20.00

Additional OrionCam Scope Eyepiece Adapter so you can use your OrionCam on other rifle scopes. This part is specifically made for your optic and insures that your scope’s ocular opening is perfectly aligned with the OrionCam system.

Use the notes area to communicate what scope you have. Please be sure to give the complete scope part number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

We have designs for most rifle scopes but if the scope you have is one that we don’t have a design for, we will ask you for some dimensional information and we will build it custom and add it to our database.

Select options
$24.00
Waterproof Case for Firefly 8SE 90 Degrees
$24.00

Clear waterproof camera Case for the Hawkeye Firefly 8SE version camera.

Select options
Sold out!
$25.00
One Pair Dovetail to Picatinny Adapters
Eaglevision Picatinny to Dovetail
$25.00
These are 26mm long by 11mm Dovetail to Picatinny Adaptors
Made from aluminum

Package includes:
- 2x 26mm adapter
- 2x allen key
- 4x top grab screws (2 different lengths)
- 4x spare ending grab screws
Read more
Sale!
Original price was: $45.00.Current price is: $30.00.
WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
Original price was: $45.00.Current price is: $30.00.
Westhunter Adjustable height scope rings
- Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
- The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
- The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
- Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
- The finishing touch to the dovetail rail and optic combination.
- Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.
Specifications listed below
Select options
$30.00
Extra Clamps For the OrionCam
OrionCam Clamps
$30.00

Additional OrionCam Scope Clamps so you can use your OrionCam on other rifles without removing the clamp from your scope.

Select options
$46.00
EagleVision 1/2.3″ 12MM LENS GoPro 2, 3 and 4
GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
$46.00
This Lens fits the GoPro 2, 3 and 4

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/1.8″ version which is a much better lens that allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Select options
$48.00 – $96.00
Two Bar System or Extra Clamps
Eaglevision Twobar or Clamps (Scope Cam)
$48.00 – $96.00
These parts are for you if:
- You already have an Eaglevision Scope Camera System and want to convert it to the new Two Bar Configuration
- You need additional clamps to eliminate the need to constantly swap a clamp to another scope.
This is high quality 30mm to 25mm (1″) or 34mm to 30mm scope tube adaptors, made of aluminum.

Here is a top-quality installation video from AirBuks.

Be sure to go by his YouTube channel and watch some of his awesome air gunning content.

Designed To Work With All Eaglevision Scope Mounts.
Select options
$50.00
Eaglevison Firefly Camera Carrier
Firefly 8SE to Eaglevision Scope Cam
$50.00

For the user that has an Eaglevision Scope Cam Setup and would like to use a FireFly with it. Some images show the camera case with the optional open door installed. This is not an included option.

Select options
$59.99
Side Shot Scope Clamps
$59.99

The clamps come in 1″, 30mm and 34mm to fit your scope tube. They allow you to mount have multiple clamps already installed on your rifles so all you need to do is slide on the Side-Shot, tighten the thumbscrews and record!

These parts are 100% American-made, precision CNC’d parts! These clamps are precision machined, sent in to be anodized, and then back for assembly.

Solid, Secure and its stainless steel parts keep it from rusting.

Select options
$60.00
GOPRO Camera Housing
Eaglevision GOPRO Camera Housing
$60.00
EV GoPro Camera Housings.
- Camera Case model for GoPro 5-6-7
- Camera Case for 9-10-11-12
Select options
$60.00
7XRGB20 Tri-Color Dot Sight
Axeon Optics
$60.00
Select options
Sold out!
Original price was: $82.00.Current price is: $68.00.
Collet system goes over diopter
Eaglevision USH-46 Collet
Original price was: $82.00.Current price is: $68.00.

The USH-46 is designed to hold all the scopes with or without threads on eye relief and will connect to the Eaglevision scope camera mounting system.

This unit can be connected to 99% of the scopes with a dimension of 40mm to 46.5mm and it will find the center automatically while you are tightening it.

Read more
$79.00 – $99.00
FX No Limit Scope Rings 1″, 30mm and 34mm
$79.00 – $99.00

FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

You will want these rings if you are planning on using my Expanded Magazine.

Select options
Sold out!
$99.00
Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Read more
$99.00
Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options