Optics, Camera, Scopes & Mounts

Scopes, scope cameras, scope rings and mounts, bubble levels and focus wheels.

Scopes, scope cameras, scope rings and mounts, bubble levels and focus wheels.

Scopes, scope cameras, scope rings and mounts, bubble levels and focus wheels.

  • Sold out!
    Picatinny Rail Anti-cant level
    Original price was: $11.00.Current price is: $7.50.

    clamps onto 20mm Pic Rail

    Picatinny Rail Anti-cant level
    Original price was: $11.00.Current price is: $7.50.

    Bubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount

    Read more
  • Battery for Firefly 8SE Camera
    $12.00
    Battery for Firefly 8SE Camera
    $12.00
    Description:
    1.This Li-ion Battery is designed for the Hawkeye Firefly 8S 8SE Camera

     

     

     

    Select options
  • Sale!
    Open Door for Firefly 8SE Case
    Original price was: $18.00.Current price is: $12.50.
    Open Door for Firefly 8SE Case
    Original price was: $18.00.Current price is: $12.50.
    Description:
    This skeletonized rear door allows you to use your touch screen without opening the case.

    Direct replacement no modifications required.

    It is recommended that you remove the white silicone gasket on the door so it is easier to close and does not impart too much stress on the hinges or the latch assembly. After all, we are not trying to achieve a waterproof assembly anyway.

    *Firefly camera is not included and is shown for reference.

     

     

    Select options
  • $13.00

    Fits Notos / HajiNotos

    NOTOS FIBER OPTIC SIGHTS
    $13.00

    The Umarex Notos was designed to be flexible to your shooting needs. The Notos has plenty of accessory rail on the top side of the rifle allowing shooters to install the optic of their choice or, a set of fixed sights. The high-contrast Fiber Optic elements pick up plenty of available light for quick accurate shooting in all lighting conditions. These Fiber Optic sights can be installed in just minutes.

    Umarex Notos Fiber Optic Sights

    • Front and Rear Fiber Optic Sights
    • Compatible with Umarex Notos PCP Airgun

    NOT COMPATIBLE WITH HAJIMOTO MAGAZINE FOR THE NOTOS

    Select options
  • Aluminum Latch for Firefly Case
    $14.00
    Aluminum Latch for Firefly Case
    $14.00

    Aluminum Latch Buckle for camera case

    Description:
    A direct replacement camera case latch buckle but made from aluminum.

    This is my aluminum CNC’d camera case latch replacement. Eventually, the lightweight plastic latch that comes on the Firefly Camera case fails and that means your camera is not held in place and you are not able to record your shots through your scope camera assembly. This part requires your original wire hinge piece which typically never breaks.

    CLEAR CAMERA CASE NOT INCLUDED. LATCH ONLY

     

     

     

    Select options
  • Sold out!
    Eaglevision Rubber Eye Piece
    $14.00

    Replacement eye cup for SC-40

    Eaglevision Rubber Eye Piece
    $14.00
    Zero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.
    Read more
  • Battery Charger for Firefly 8SE
    $14.50 – $34.00
    Battery Charger for Firefly 8SE
    $14.50 – $34.00
    Description:
    Dual Battery Quick Charger for Firefly 8SE Camera Batteries.

    Available in 3 configurations with or without extra camera batteries.

    Use a 5V 2A output USB port to charge 2 batteries.

     

     

     

    Select options
  • $15.00

    Scope bubble level

    Anti-Cant Bubble Level
    $15.00
    Select options
  • $20.00 – $27.00

    Eaglevision

    Eaglevision Tube Adapter Rings
    $20.00 – $27.00

    This is high quality 30mm to 1″ or 34mm to 30mm scope tube adaptors, made of aluminium.

    Designed To Works With All Eaglevision Scope Mounts.

    Select options
  • OrionCam Scope Eyepiece Adapter
    $20.00

    Extra Scope Eyepiece Adapter For the OrionCam

    OrionCam Scope Eyepiece Adapter
    $20.00

    Additional OrionCam Scope Eyepiece Adapter so you can use your OrionCam on other rifle scopes. This part is specifically made for your optic and insures that your scope’s ocular opening is perfectly aligned with the OrionCam system.

    Use the notes area to communicate what scope you have. Please be sure to give the complete scope part number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

    We have designs for most rifle scopes but if the scope you have is one that we don’t have a design for, we will ask you for some dimensional information and we will build it custom and add it to our database.

    Select options
  • Waterproof Case for Firefly 8SE 90 Degrees
    $24.00
    Waterproof Case for Firefly 8SE 90 Degrees
    $24.00
    Clear waterproof camera Case for the Hawkeye Firefly 8SE version camera.

     

     

     

    Select options
  • Sold out!
    $25.00

    One Pair Dovetail to Picatinny Adapters

    Eaglevision Picatinny to Dovetail
    $25.00

    These are 26mm long by 11mm Dovetail to Picatinny Adaptors
    Made from aluminum

    Package includes:

    • 2x 26mm adapter
    • 2x allen key
    • 4x top grab screws (2 different lengths)
    • 4x spare ending grab screws
    Read more
  • Sale!
    WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
    Original price was: $45.00.Current price is: $30.00.
    WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
    Original price was: $45.00.Current price is: $30.00.

    Westhunter Adjustable height scope rings

    • Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
    • The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
    • The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
    • Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
    • The finishing touch to the dovetail rail and optic combination.
    • Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.

    Specifications listed below

    Select options
  • OrionCam Clamps
    $30.00

    Extra Clamps For the OrionCam

    OrionCam Clamps
    $30.00

    Additional OrionCam Scope Clamps so you can use your OrionCam on other rifles without removing the clamp from your scope.

    Select options
  • GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
    $46.00

    EagleVision 1/2.3″ 12MM LENS GoPro 2, 3 and 4

    GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
    $46.00

    This Lens fits the GoPro 2, 3 and 4

    This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

    You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

    Item includes:

    • Free case.
    • GoPro fitting Lens

    I also stock the 1/1.8″ version which is a much better lens that allows more light to the camera for brighter images.

    Please note:
    The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

    Select options
  • Eaglevision Twobar or Clamps (Scope Cam)
    $48.00 – $96.00

    Two Bar System or Extra Clamps

    Eaglevision Twobar or Clamps (Scope Cam)
    $48.00 – $96.00

    These parts are for you if:

    • You already have an Eaglevision Scope Camera System and want to convert it to the new Two Bar Configuration
    • You need additional clamps to eliminate the need to constantly swap a clamp to another scope.

    This is high quality 30mm to 25mm (1″) or 34mm to 30mm scope tube adaptors, made of aluminum.

    Here is a top-quality installation video from AirBuks.

    Be sure to go by his YouTube channel and watch some of his awesome air gunning content.

    Designed To Work With All Eaglevision Scope Mounts.

     

    Select options
  • Firefly 8SE to Eaglevision Scope Cam
    $50.00

    Eaglevison Firefly Camera Carrier

    Firefly 8SE to Eaglevision Scope Cam
    $50.00

    For the user that has an Eaglevision Scope Cam Setup and would like to use a FireFly with it. Some images show the camera case with the optional open door installed. This is not an included option.

    Select options
  • Side Shot Scope Clamps
    $59.99
    Side Shot Scope Clamps
    $59.99

    The clamps come in 1″, 30mm and 34mm to fit your scope tube. They allow you to mount have multiple clamps already installed on your rifles so all you need to do is slide on the Side-Shot, tighten the thumbscrews and record!

    These parts are 100% American-made, precision CNC’d parts! These clamps are precision machined, sent in to be anodized, and then back for assembly.

    Solid, Secure and its stainless steel parts keep it from rusting.

    Select options
  • $60.00

    GOPRO Camera Housing

    Eaglevision GOPRO Camera Housing
    $60.00

    EV GoPro Camera Housings.

    • Camera Case model for GoPro 5-6-7
    • Camera Case for 9-10-11-12

     

    Select options
  • Axeon Optics
    $60.00

    7XRGB20 Tri-Color Dot Sight

    Axeon Optics
    $60.00
    Select options
  • Sold out!
    Eaglevision USH-46 Collet
    Original price was: $82.00.Current price is: $68.00.

    Collet system goes over diopter

    Eaglevision USH-46 Collet
    Original price was: $82.00.Current price is: $68.00.

    The USH-46 is designed to hold all the scopes with or without threads on eye relief and will connect to the Eaglevision scope camera mounting system.

    This unit can be connected to 99% of the scopes with a dimension of 40mm to 46.5mm and it will find the center automatically while you are tightening it.

    Read more
  • FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00
    FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00

    FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

    You will want these rings if you are planning on using my Expanded Magazine.

    Select options
  • Sold out!
    Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision INS Mount

    Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spears screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Read more
  • Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
    $99.00

    Eaglevision IPS Mount

    Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spare screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Select options
  • Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
    $99.00

    Eaglevision IPS Mount

    Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spare screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Select options
  • Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
    $99.00

    Eaglevision INS Mount

    Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spears screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Select options
  • Axeon Optics
    $110.00

    MDSR1 Micro Dot Sight with Riser

    Axeon Optics
    $110.00

    Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

    Features:

    • 1X Magnification
    • 20mm Objective
    • Red Dot LED Reticle
    • .50 MOA Adjustment Size
    • Adjustable Windage and Elevation

    Select options
  • Sold out!
    GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
    $112.00

    EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4

    GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
    $112.00

    Lens fits the GoPro 2, 3 and 4.

    This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

    You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

    Item includes:

    • Free case.
    • GoPro fitting Lens

    I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.

    Please note:
    The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

     

     

     

    Read more
  • Sale!
    GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    Original price was: $130.00.Current price is: $120.00.

    EagleVision 1/1.8″ 12MM LENS

    GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    Original price was: $130.00.Current price is: $120.00.

    Lens fits the GoPro 5, 6 and 7.

    This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

    You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

    Item includes:

    • Free case.
    • GoPro fitting Lens

    I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

    Please note:
    The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

    If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

    Just click HERE to be redirected to this product on his website.
    Be sure to tell Bob that Hajimoto sent ya ?

    Select options
  • Sold out!
    Eaglevision Side-Cam SPLITTER ONLY
    $134.00

    SC-40 ONLY not a full kit

    Eaglevision Side-Cam SPLITTER ONLY
    $134.00
    Please note:
    This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)
    Select options
  • Sold out!
    GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    $150.00

    EagleVision 1/1.8″ 12MM LENS

    GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    $150.00

    Lens fits the GoPro 9, 10, 11 and 12.

    GoPro 9, 10, 11, and 12 cannot be used on the scope cam without changing the lens.
    In order to use this product as intended, you MUST watch the below video on how to change the lens.
    Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.

    Your camera will be out of warranty if you remove the lens.

    DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.

    The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. You will need a T4 screwdriver or T4 screwdriver bit to do the installation.

    This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.

    We are not responsible for any damage you may cause to your camera when doing the lens swap.

    Lens swap video

    Read more
  • Sale!
    Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
    Original price was: $245.00.Current price is: $185.00.
    Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
    Original price was: $245.00.Current price is: $185.00.

    Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*

    Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!

    Description:
    Brand Name: Hawkeye Series
    Name: Firefly Item Name: 8SE
    Version: 90 degrees Distortionless version
    Chipset: Ambarella A12S75
    Type: Sports Camera
    Type of Camera: 4K
    Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
    Maximum Size of Micro SD card Supported: 128G (not included)
    Wi-Fi +BT 3.0 Remote Control: Yes
    LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
    Camera Size: 59×41×21mm
    Weight: 70g
    Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
    Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
    Compressed Format: H.264
    Video/photo Format:   *.MP4 / *.JPG
    Distortionless Version Diaphrag: F/2.8, 11 glass
    Working Voltage: 5V
    Power Supply: 1A
    Photo Resolution: 16M/14M/12M/8.3M/5M/3M
    AV Output Format USB Port: PAL/NTSC
    HD Output: Yes
    WIFI: Yes

    Features:
    – Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
    – 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
    – 1200mAh 3.85V high-voltage high-capacity battery, more durable.
    – Gyro 2.0 image stabilization,support WiFi + BT 3.0 Remote control.
    – Support external microphone, Bluetooth connection remote control (not included).

    Package Includes:
    • 1 x Camera
    • 1 x Waterproof Case
    • 1 x Waterproof Case Front Cover Case
    • 1 x Bicycle Stand 1 x J Base 4 x Strap
    • 1 x Plastic Tie
    • 1 x Long Connector with Screws
    • 1 x Short Connector with Screws
    • 1 x 1/4 inch Adapters Set
    • 2 x Mounting Base
    • 2 x Adhesive Tape
    • 1 x Metal Cable Tie
    • 1 x Cleaning Cloth
    • 1 x Lens Protection Frame
    • 1 x Lens Protective Cover
    • 1 x Microphone
    • 1x English User Manual

    All/any warranties are manufacturer-provided.

    English Manual,
    Click Here

    *Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.

    Select options
  • Sale!
    Hajimoto Side Shot for Firefly 8SE 90 Degrees
    $230.00 – $385.00
    Hajimoto Side Shot for Firefly 8SE 90 Degrees
    $230.00 – $385.00
    Hajimoto Side Shot for Firefly 8SE 90 Degrees

    The Side Shot Firefly setup all done for you! Hajimoto professionally modified and installed a Firefly 8SE case so all you need to do is install your scope clamp drop in your Firefly 8SE 9o degree distortionless camera and go. You can also go with the complete turnkey solution which includes the Firefly Camera as well!

    Installation video from Jeremiah @ Bullfrog Airguns check his YouTube Channel out, a very cool air gunner.

    Select options
  • Sale!
    WestHunter WHT 4-16×44 FFP Scope
    Original price was: $240.00.Current price is: $230.00.
    NEW MODEL
    WestHunter WHT 4-16×44 FFP Scope
    Original price was: $240.00.Current price is: $230.00.

    The WHT Tactical First Focal Plane 4-16×44 Rifle Scope

    Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model

    Package includes:

    • Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
    • Scope
    • Sun Shade
    • Front and rear flip up lens covers
    • Large Magnification Wheel (Removable)

    Optional adjustable height scope rings are available

    Features

    • Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
    • Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
    • Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
    • Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
    • This optic has passed very strict WestHunter performance testing.

     

    Specifications listed below
    Select options
  • Side Shot for GoPro 2-3-4
    $239.00

    GoPro 2-3-4 scope cam

    Side Shot for GoPro 2-3-4
    $239.00
    Side Shot for GoPro 2-3 or4

    The world famous Side Shot scope camera system but designed to support your GoPro!

    The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

    Select options
  • Sale!
    WestHunter WHT 6-24×44 FFP Scope
    Original price was: $325.00.Current price is: $260.00.
    NEW MODEL
    WestHunter WHT 6-24×44 FFP Scope
    Original price was: $325.00.Current price is: $260.00.

    The WHT Tactical First Focal Plane 6-24×44 Rifle Scope

    Do not confuse this optic with the less robust Westhunter HD 6-24×50 Scope

    Package includes:

    • Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
    • Scope
    • Honeycomb sunshade/diffuser
    • Front and rear flip-up lens covers
    • Illuminated reticle battery
    • Lens Cloth

    Features

    • Shorter, lighter and brighter than the previous HD model.
    • First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
    • Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
    • Illuminated etched reticle with six levels of brightness.
    • Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
    • Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
    • Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
    • Superior WHT image clarity makes this a slam dunk when it comes to value for the dollar.

    Specifications listed below

    Select options
  • Side Shot for GoPro 5-6-7
    $279.00

    GoPro Side Shot 5-6-7

    Side Shot for GoPro 5-6-7
    $279.00
    Side Shot for GoPro 5-6 or 7

    The world famous Side Shot scope camera system but designed to support your GoPro!

    The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

    Select options
  • Eaglevision Scope Cam for GP 5,6,7 Hero Black
    $289.00 – $390.00

    Two Bar or Collet Holder Versions

    Eaglevision Scope Cam for GP 5,6,7 Hero Black
    $289.00 – $390.00

    A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

    Collet Clamp System includes:

    • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
    • 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
    • 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
    • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
    • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

    Two Bar System includes:

    • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
    • 1 x 2B-USH which includes:
      Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
      34 mm to 30 mm Ring Adaptor
      34 mm to 25 mm Ring Adaptor
    • 1 x 2B-UCH which includes:
      2 x Aluminium Bars (17 mm long)
      1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
      2 x Ball Screws
      2 x Ball Grab Screws
    • 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
    • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
    • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

    Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

    Here is another video that shows the Eaglevision Scope Cam USH system being installed.

    Please be sure to visit his awesome YouTube channel for some really great airgunning content.

    Select options
  • Eaglevision Scope Cam for GP 9,10,11,12 Hero Black
    $294.00 – $405.00

    Two Bar or Collet Holder Versions

    Eaglevision Scope Cam for GP 9,10,11,12 Hero Black
    $294.00 – $405.00

    A very high-quality scope camera unit made to support the GoPro 9, 10, 11. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

    Collet Clamp System includes:

    • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
    • 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
    • 1 x GOPRO Housing 9, 10 ,11 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10 and 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
    • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
    • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

    Two Bar System includes:

    • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
    • 1 x 2B-USH which includes:
      Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
      34 mm to 30 mm Ring Adaptor
      34 mm to 25 mm Ring Adaptor
    • 1 x 2B-UCH which includes:
      2 x Aluminium Bars (17 mm long)
      1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
      2 x Ball Screws
      2 x Ball Grab Screws
    • 1 x GOPRO Housing 9,10,11, 12 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10, 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
    • 1 x case The new waterproof case will allow you to store your camera mounting system tidy and safe.
    • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

    Here is a great video from Eaglevision Cam demonstrating how to replace the lens on your GoPro 9-11 or 12 Camera

    Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

    Please be sure to visit his awesome YouTube channel for some really great airgunning content.

    Select options
  • Eaglevision Scope Cam for Firefly 8SE 90°
    $299.00 – $495.00

    Two Bar or Collet Holder Versions

    Eaglevision Scope Cam for Firefly 8SE 90°
    $299.00 – $495.00


    Hawkeye FireFly 8SE 90° Nondistortion Camera is optional. Some images show the camera case with the optional open door installed. This is not an included option.

    A very high-quality scope camera unit made to support the Firefly. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

    Collet Clamp System includes:

    • 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
    • 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
    • 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
    • 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.

    Two Bar System includes:

    • 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
    • 1 x 2B-USH.
    • 1 x 2B-UCH.
    • 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
    • 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.

    Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system. Installation of the FireFly or GoPro is the same.

    Please be sure to visit his awesome YouTube channel for some really great airgunning content.

    Select options
  • OrionCam & Video Camera Bundle
    $305.00 – $375.00

    OrionCam with Firefly 8SE 90°

    OrionCam & Video Camera Bundle
    $305.00 – $375.00

    The OrionCam is the result of years of frustration caused by fighting with systems for alignment, image clarity, ease of attachment, and cost. While there are many options on the market for scope camera capture, they all suffered from at least one of these variables. Image clarity is the most important as it communicates what happened in just a fragment of real-time. The clearer the image the more review value the video has. May it be projectile in flight characteristics or hunting shot placement instances, if you can’t see it clearly, you’re forced to do what you have always done until now and that is to rely on your memory.

    The Optional Deluxe package includes: 1 Extra Camera Battery, Two Slot Battery Fast Charger, Open back Camera Case door, 32GB Fast Write SD Memory Card, Assembled Modified Camera Case to OrionCam Adapter. Literally everything you need in one package.

    Camera Mount means your scope camera latch will be at the top and your Camera will be on the left of your scope or the right of your scope.

    • Image quality is achieved through the use of high-quality German glass as the image splitter.
    • The OrionCam is constructed from ABS and PETG Polymers.
    • Easy to take on and off and guaranteed concentricity with alignment rings designed specifically for your scope.
    • The design supports the use of either the Firefly or GoPro with the proper camera adapter.
    • Scope clamps are available in popular scope tube sizes of 1”, 30mm, 34mm, 35mm, or 40mm, or any custom size up to 46mm.
    • The advantage of the OrionCam is the ability for the system to be custom tailored for your specific optic.

    Use the notes area to communicate what scope you have. Please be sure to give the complete scope part number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

     ** See Below Video of an OrionCam being installed **

    Select options
  • Sale!
    WestHunter TD 5-30X56 SFIR FFP Scope
    Original price was: $440.00.Current price is: $351.00.

    TD 5-30X56 FFP 34mm W/Zero Stop

    WestHunter TD 5-30X56 SFIR FFP Scope
    Original price was: $440.00.Current price is: $351.00.

    The Westhunter TD 5-30X56 SFIR FFP

    Package includes:

    • Scope
    • 1 set of 34mm Picatinny Scope Rings
    • Sunshade
    • Large focus wheel.
    • Front and rear flip-up lens covers
    • Illuminated reticle battery
    • Lens Cloth

    Features

    • First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
    • Massive 30x Magnification
    • Incredibly large 56mm objective lens
    • As close as 10 yards on the focus
    • Zero Stop Turret.
    • Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
    • Illuminated etched reticle with six levels of brightness.
    • Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
    • Featuring quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
    • Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
    • Superior TD image clarity makes this a slam dunk when it comes to value for the dollar.

    Here is a link to instructions for the ZERO STOP FEATURE

    Specifications listed below

    Select options
  • Sale!
    OrionCam2 Xs Bundle
    Original price was: $629.00.Current price is: $495.00.

    ORIONCAM2 Xs BUNDLE Firefly Xs with 4K 12mm Lens

    OrionCam2 Xs Bundle
    Original price was: $629.00.Current price is: $495.00.

    Introducing the technological step in scope cam evolution, the OrionCam2 with Firefly Xs 4K 12mm 1.8 lens! We’ve done all the work for you here.

    The OrionCam2 Xs: Firefly Xs with Custom 4K 12mm Lens Installed, Assembled Modified Camera Case to OrionCam AdapterTwo Camera Batteries, Two Slot Battery Fast Charger, Open back Camera Case door, 64GB Fast Write SD Memory Card, and Multi-Port Media Reader (USB-C, USB-A, USB-Micro, Lightning)!.

    In the options, the “Camera Mount” option means your camera will be on the left of your scope or the right of your scope. This allows the start button and case latch to be on the top. Another way to think about this is you want the camera on the same side of scope as the eye you use so the camera case is not hitting your nose

    • The OrionCam2 uses high-quality German glass as the image splitter, far superior image clarity.
    • The OrionCam2 is constructed from ABS and PETG Polymers which are rugged and lightweight.
    • Easy to take on and off and guaranteed concentricity with alignment rings designed specifically for your scope.
    • The Firefly Xs with 12mm lens means great full frame 4K video @ 60FPS or 2.7@60FPS, 1080@180FPS or 720@240FPS.
    • Amazing video clarity from the new Xs sensor.
    • Scope clamps are available in popular scope tube sizes of 1”, 30mm, 34mm, 35mm, or 40mm, or any custom size up to 46mm.
    • One of the main advantages of the OrionCam2 other than top-of-the-line image clarity, is the ability for the system to be custom tailored for your specific optic.

    Use the notes area to communicate what scope you have. Please be sure to give the complete scope model number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

     ** See Below Video of an OrionCam being installed **

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.