Optics, Camera, Scopes & Mounts

$99.00
Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$99.00
Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
$99.00
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
Select options
$110.00
MDSR1 Micro Dot Sight with Riser
Axeon Optics
$110.00
Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

Features:
- 1X Magnification
- 20mm Objective
- Red Dot LED Reticle
- .50 MOA Adjustment Size
- Adjustable Windage and Elevation
Select options
Sold out!
$112.00
EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4
GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
$112.00
Lens fits the GoPro 2, 3 and 4.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Read more
Sale!
Original price was: $130.00.Current price is: $120.00.
EagleVision 1/1.8″ 12MM LENS
GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
Original price was: $130.00.Current price is: $120.00.
Lens fits the GoPro 5, 6 and 7.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

Just click HERE to be redirected to this product on his website.
Be sure to tell Bob that Hajimoto sent ya ?
Select options
Sold out!
$134.00
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Select options
Sold out!
$150.00
EagleVision 1/1.8″ 12MM LENS
GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$150.00

Lens fits the GoPro 9, 10, 11 and 12.

GoPro 9, 10, 11, and 12 cannot be used on the scope cam without changing the lens.
In order to use this product as intended, you MUST watch the below video on how to change the lens.
Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.

Your camera will be out of warranty if you remove the lens.

DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.

The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. You will need a T4 screwdriver or T4 screwdriver bit to do the installation.

This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.

We are not responsible for any damage you may cause to your camera when doing the lens swap.

Lens swap video

Read more
Sale!
Original price was: $245.00.Current price is: $185.00.
Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
Original price was: $245.00.Current price is: $185.00.
Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*

Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!

Description:
Brand Name: Hawkeye Series
Name: Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: Yes
Features:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,support WiFi + BT 3.0 Remote control.
– Support external microphone, Bluetooth connection remote control (not included).

Package Includes:

1 x Camera

1 x Waterproof Case

1 x Waterproof Case Front Cover Case

1 x Bicycle Stand 1 x J Base 4 x Strap

1 x Plastic Tie

1 x Long Connector with Screws

1 x Short Connector with Screws

1 x 1/4 inch Adapters Set

2 x Mounting Base

2 x Adhesive Tape

1 x Metal Cable Tie

1 x Cleaning Cloth

1 x Lens Protection Frame

1 x Lens Protective Cover

1 x Microphone

1x English User Manual

All/any warranties are manufacturer-provided.

English Manual,
Click Here

*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Select options
Sale!
$230.00 – $385.00
Hajimoto Side Shot for Firefly 8SE 90 Degrees
$230.00 – $385.00

Hajimoto Side Shot for Firefly 8SE 90 Degrees

The Side Shot Firefly setup all done for you! Hajimoto professionally modified and installed a Firefly 8SE case so all you need to do is install your scope clamp drop in your Firefly 8SE 9o degree distortionless camera and go. You can also go with the complete turnkey solution which includes the Firefly Camera as well!

Installation video from Jeremiah @ Bullfrog Airguns check his YouTube Channel out, a very cool air gunner.

Select options
Sale!
Original price was: $240.00.Current price is: $230.00.
NEW MODEL
WestHunter WHT 4-16×44 FFP Scope
Original price was: $240.00.Current price is: $230.00.
The WHT Tactical First Focal Plane 4-16×44 Rifle Scope

Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Sun Shade
- Front and rear flip up lens covers
- Large Magnification Wheel (Removable)
Optional adjustable height scope rings are available

Features
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
- This optic has passed very strict WestHunter performance testing.
Specifications listed below
Select options
$239.00
GoPro 2-3-4 scope cam
Side Shot for GoPro 2-3-4
$239.00

Side Shot for GoPro 2-3 or4

The world famous Side Shot scope camera system but designed to support your GoPro!

The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

Select options
Sale!
Original price was: $325.00.Current price is: $260.00.
NEW MODEL
WestHunter WHT 6-24×44 FFP Scope
Original price was: $325.00.Current price is: $260.00.
The WHT Tactical First Focal Plane 6-24×44 Rifle Scope

Do not confuse this optic with the less robust Westhunter HD 6-24×50 Scope

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Honeycomb sunshade/diffuser
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- Shorter, lighter and brighter than the previous HD model.
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior WHT image clarity makes this a slam dunk when it comes to value for the dollar.
Specifications listed below
Select options
$279.00
GoPro Side Shot 5-6-7
Side Shot for GoPro 5-6-7
$279.00

Side Shot for GoPro 5-6 or 7

The world famous Side Shot scope camera system but designed to support your GoPro!

The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

Select options
$289.00 – $390.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for GP 5,6,7 Hero Black
$289.00 – $390.00
A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x 2B-USH which includes:
  Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
  34 mm to 30 mm Ring Adaptor
  34 mm to 25 mm Ring Adaptor
- 1 x 2B-UCH which includes:
  2 x Aluminium Bars (17 mm long)
  1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
  2 x Ball Screws
  2 x Ball Grab Screws
- 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

Here is another video that shows the Eaglevision Scope Cam USH system being installed.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
$294.00 – $405.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for GP 9,10,11,12 Hero Black
$294.00 – $405.00
A very high-quality scope camera unit made to support the GoPro 9, 10, 11. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x GOPRO Housing 9, 10 ,11 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10 and 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x 2B-USH which includes:
  Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
  34 mm to 30 mm Ring Adaptor
  34 mm to 25 mm Ring Adaptor
- 1 x 2B-UCH which includes:
  2 x Aluminium Bars (17 mm long)
  1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
  2 x Ball Screws
  2 x Ball Grab Screws
- 1 x GOPRO Housing 9,10,11, 12 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10, 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case The new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a great video from Eaglevision Cam demonstrating how to replace the lens on your GoPro 9-11 or 12 Camera

Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
$299.00 – $495.00
Two Bar or Collet Holder Versions
Eaglevision Scope Cam for Firefly 8SE 90°
$299.00 – $495.00
Hawkeye FireFly 8SE 90° Nondistortion Camera is optional. Some images show the camera case with the optional open door installed. This is not an included option.

A very high-quality scope camera unit made to support the Firefly. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:
- 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
- 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.
Two Bar System includes:
- 1 x Side Camera Unit that splits the image for recording. Two Choices split degree.
- 1 x 2B-USH.
- 1 x 2B-UCH.
- 1 x Firefly 8SE case + MUN-1 It allows you to connect the Firefly 8SE. The Firefly 8SE setup has a non distortion lens so, unlike the GoPro setup, no lens swap is required!
- 1 x storage case the new waterproof case will allow you to store your camera mounting system tidy and safe.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system. Installation of the FireFly or GoPro is the same.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Select options
$305.00 – $375.00
OrionCam with Firefly 8SE 90°
OrionCam & Video Camera Bundle
$305.00 – $375.00
The OrionCam is the result of years of frustration caused by fighting with systems for alignment, image clarity, ease of attachment, and cost. While there are many options on the market for scope camera capture, they all suffered from at least one of these variables. Image clarity is the most important as it communicates what happened in just a fragment of real-time. The clearer the image the more review value the video has. May it be projectile in flight characteristics or hunting shot placement instances, if you can’t see it clearly, you’re forced to do what you have always done until now and that is to rely on your memory.

The Optional Deluxe package includes: 1 Extra Camera Battery, Two Slot Battery Fast Charger, Open back Camera Case door, 32GB Fast Write SD Memory Card, Assembled Modified Camera Case to OrionCam Adapter. Literally everything you need in one package.

Camera Mount means your scope camera latch will be at the top and your Camera will be on the left of your scope or the right of your scope.
- Image quality is achieved through the use of high-quality German glass as the image splitter.
- The OrionCam is constructed from ABS and PETG Polymers.
- Easy to take on and off and guaranteed concentricity with alignment rings designed specifically for your scope.
- The design supports the use of either the Firefly or GoPro with the proper camera adapter.
- Scope clamps are available in popular scope tube sizes of 1”, 30mm, 34mm, 35mm, or 40mm, or any custom size up to 46mm.
- The advantage of the OrionCam is the ability for the system to be custom tailored for your specific optic.
Use the notes area to communicate what scope you have. Please be sure to give the complete scope part number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

** See Below Video of an OrionCam being installed **
Select options
Sale!
Original price was: $440.00.Current price is: $351.00.
TD 5-30X56 FFP 34mm W/Zero Stop
WestHunter TD 5-30X56 SFIR FFP Scope
Original price was: $440.00.Current price is: $351.00.
The Westhunter TD 5-30X56 SFIR FFP

Package includes:
- Scope
- 1 set of 34mm Picatinny Scope Rings
- Sunshade
- Large focus wheel.
- Front and rear flip-up lens covers
- Illuminated reticle battery
- Lens Cloth
Features
- First Focal Plane means reticle and target grow equally in magnification making holder calculations simple.
- Massive 30x Magnification
- Incredibly large 56mm objective lens
- As close as 10 yards on the focus
- Zero Stop Turret.
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Illuminated etched reticle with six levels of brightness.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fog proof.
- Superior TD image clarity makes this a slam dunk when it comes to value for the dollar.
Here is a link to instructions for the ZERO STOP FEATURE

Specifications listed below
Select options
Sale!
Original price was: $629.00.Current price is: $495.00.
ORIONCAM2 Xs BUNDLE Firefly Xs with 4K 12mm Lens
OrionCam2 Xs Bundle
Original price was: $629.00.Current price is: $495.00.
Introducing the technological step in scope cam evolution, the OrionCam2 with Firefly Xs 4K 12mm 1.8 lens! We’ve done all the work for you here.

The OrionCam2 Xs: Firefly Xs with Custom 4K 12mm Lens Installed, Assembled Modified Camera Case to OrionCam AdapterTwo Camera Batteries, Two Slot Battery Fast Charger, Open back Camera Case door, 64GB Fast Write SD Memory Card, and Multi-Port Media Reader (USB-C, USB-A, USB-Micro, Lightning)!.

In the options, the “Camera Mount” option means your camera will be on the left of your scope or the right of your scope. This allows the start button and case latch to be on the top. Another way to think about this is you want the camera on the same side of scope as the eye you use so the camera case is not hitting your nose
- The OrionCam2 uses high-quality German glass as the image splitter, far superior image clarity.
- The OrionCam2 is constructed from ABS and PETG Polymers which are rugged and lightweight.
- Easy to take on and off and guaranteed concentricity with alignment rings designed specifically for your scope.
- The Firefly Xs with 12mm lens means great full frame 4K video @ 60FPS or 2.7@60FPS, 1080@180FPS or 720@240FPS.
- Amazing video clarity from the new Xs sensor.
- Scope clamps are available in popular scope tube sizes of 1”, 30mm, 34mm, 35mm, or 40mm, or any custom size up to 46mm.
- One of the main advantages of the OrionCam2 other than top-of-the-line image clarity, is the ability for the system to be custom tailored for your specific optic.
Use the notes area to communicate what scope you have. Please be sure to give the complete scope model number including the tube size EXAMPLE: Hawke Sidewinder 30 SF 6-24×56

** See Below Video of an OrionCam being installed **
Select options