Additional information
| Weight | 3 oz |
|---|---|
| Dimensions | 3 × 3 × 1 in |
$19.99
Stock up and stack up these new Notos Gen 2 Magazines. These redesigned .22 caliber Notos magazines are easier to load and more than double the capacity of the original Notos mags. With 15 rounds in wheel, you can shoot longer between magazine changes and store up fewer magazines for your favorite airgun. Yes, this magazine works on both the original Umarex Notos and the Notos Gen 2.
Features
| Weight | 3 oz |
|---|---|
| Dimensions | 3 × 3 × 1 in |
You must be logged in to post a review.
Built on the Umarex Notos
The Notos is side lever repeater and one of the most affordable, accurate compact shooters on the market.
Using the available service options below, we can transform an already awesome Notos that flies JSB Hades 15.89 gr @ 744 ft/s for 24 shots to a respectable 850 ft/s with over 130 shots shooting the same Hades 15.89 gr lead pellets!
We consistently hit targets at 70-100 yards with a red dot!
Our Custom Builder Interface allows you to select the build options and parts you want, and we build it for you. This service can include a new Notos, or you can send yours in for the build. You can select a Notos of your dreams. When you receive it, all you need to do is fill, load, and enjoy!.
Huben Power Dream-Notos/Notos G2 TK with 0.30L, 0.36L, 0.50L CF Tank
Fits the Umarex Notos and the Notos G2
Genuine Huben Power Dream-Notos TK mounted on a .30L (300cc) 0.36L (360CC) or .50L (500cc)
A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.
FEATURES
While not 100% required, a barrel band is strongly recommended to carry the weight of the plenum, regulator, and cylinder assembly. This eliminates placing all of the lateral load on a small mechanical connection at the plenum to action interface.
See details below
Built on the Umarex Notos G2
The Notos G2 is side lever repeater and one of the most affordable, accurate compact shooters on the market.
Using the available service options below, we can transform an already awesome stock Notos G2 that flies JTS Dead Center 16 gr lead pellets @ 760 ft/s for 32 shots up to an amazing 880 ft/s with over 180 shots shooting the same JTS Dead Center 16 gr lead pellets!
We consistently hit targets at 70-100 yards with a red dot!
Our Custom Builder Interface allows you to select the build options and parts you want, and we build it for you. This service can include a new Notos G2, or you can send your own in for the build. You can custom select, and we will build the Notos G2 of your dreams. When you receive it, all you need to do is fill, load, and enjoy!.
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Introducing a Hajimoto Productions Exclusive offer!
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI
Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI
If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
Please note that these are services to your rifle and not just the parts. If your looking for parts only head to the PRODUCTS section of the website.
The service of installing the Super Tune Kit does not include shipping. Return shipping will be calculated and added at check out. Shipping cost will be based on a complete rifle sent to Hajimoto Productions in the original box and packing materials. Stock modification is part of the STK install which is why you need to send the entire rifle to us not just the action. If the rifle is received in something heavier than the typical 14lbs, additional shipping costs will need to be paid prior to the rifle being shipped back to the customer.
THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
Copyright All rights reserved Hajimoto Productions LLC 2026
Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.All products offered on our website are intended for airgun use only. Federal law prohibits using a product in any way not consistent with its intended use. It is the purchaser's responsibility to know and comply with all applicable state, county, and local laws and ordinances. Dismiss
Reviews
There are no reviews yet.