$380.00
ALL NEW!
Works with all versions of the Umarex Gauntlet 1, 2, 30 Cal, Bolt action or SL variants*!
500cc/.5L CE Certified CF Tank
Shaves off 1/2 a pound of weight on the Gauntlet 2/Gaunlet 30, compared to the stock aluminum tank and regulator configuration.
Includes the UX/Ninja X-Regulator.
The CF Tank is CE Certified, made to ISO 11119-3 standard. The cylinder has a seamless aluminum alloy 6061 liner wound with high-strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 500cc and is gorgeous on the Gauntlet series of PCP.
Operating Pressure Recommendations
Gauntlet 1:
.177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
.25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2300PSI.
Gauntlet 2/SL:
.22 Stock operating pressure 1900PSI Max Recommended pressure is 2150PSI.
.25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2400PSI.
Gauntlet 30/30SL:
.30 Stock operating pressure 2800PSI Max Recommended pressure is 3100PSI.
NINJA REGULATORS ARE MADE IN THE USA!
*Tank shroud must be removed and left off to use this setup.
Direct replacement for the aluminum tank and regulator that comes on the Gauntlet 1, 2, G30, SL, or Bolt.
The custom unit can be ordered with any custom regulator output pressure in 100-PSI increments.
NOTE: The regulator output will be +/- 50 PSI of the requested output.
| Weight | 32 oz |
|---|---|
| Dimensions | 15 × 2.25 × 2.25 in |
| Regulator Output | 1100 PSI, 1200 PSI, 1300 PSI, 1400 PSI, 1500 PSI, 1600 PSI, 1700 PSI, 1800 PSI, 1900 PSI, 2000 PSI, 2100 PSI, 2200 PSI, 2300 PSI, 2400 PSI, 2500 PSI, 2600 PSI, 2700 PSI, 2800 PSI, 2900 PSI, 3000 PSI, 3100 PSI |
You must be logged in to post a review.
Gauntlet Gen: G30/G30SL/G2SL22/G2SL25 500cc CF Tank, Type: With Rail
Gauntlet Gen: G30/G30SL/G2SL22/G2SL25 500cc CF Tank, Type: Without Rail
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
Intended for higher power builds
This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.
The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same
Part fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
Reviews
There are no reviews yet.