Description
An example of what your Eaglevision Scope Camera Setup Will look like with the FireFly Adapter Installed (Shown with OPTIONAL open back door).

$50.00 – $60.00Price range: $50.00 through $60.00
For the user that has an Eaglevision Scope Cam Setup and would like to use a FireFly with it. Some images show the camera case with the optional open door installed. This is not an included option.

| Weight | 4 oz |
|---|---|
| Dimensions | 3 × 3 × 2 in |
| Rear Door | Closed Stock, Open Back Skeletonized |
You must be logged in to post a review.
Direct replacement no modifications required.
It is recommended that you remove the white silicone gasket on the door so it is easier to close and does not impart too much stress on the hinges or the latch assembly. After all, we are not trying to achieve a waterproof assembly anyway.
*Firefly camera is not included and is shown for reference.
Two Bar or Collet Holder Versions
Hawkeye FireFly 8SE 90° Nondistortion Camera is optional. Some images show the camera case with the optional open door installed. This is not an included option.
A very high-quality scope camera unit made to support the Firefly. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.
Collet Clamp System includes:
Two Bar System includes:
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system. Installation of the FireFly or GoPro is the same.
Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*
Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!
Description:
Brand Name:Â Hawkeye Series
Name:Â Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: Â *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: Yes
Features:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,
– Supports WiFi
– Support for Bluetooth connection remote control (not included).

All/any warranties are manufacturer-provided.
English Manual,
Click Here
*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Gauntlet STK
THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK
Kits available to fit Gauntlet 1, Gauntlet 2, Gauntlet 2 SL, or Gauntlet 2 Limited 22/25, variants.
The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment, opening the possibility of higher or lower foot-pounds (FPE) for whatever the user desires. Do you need only 5FPE? No problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!
Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required to know the rate of travel of the projectile. (Power examples given are the .22 caliber version Gauntlet 1)Â
For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation, as there is a difference, and improperly selected kits are not returnable.
BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET
CONTENTS:
Be sure to follow my written instructions in the document below.
Use the video to install but follow these written instructions to adjust and tune the STK:
Written Detailed Tuning Instructions for the STK
More details below.
Always read the content below because any revised instructions, video, photos, or other links will be there.
For Gauntlet .177, .22, .25 and .30 Calibers
Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.
Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell
Features
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
For the Gauntlet 1 or 2

This part is designed and manufactured by DonnyFL
Copyright All rights reserved Hajimoto Productions LLC 2026
Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.All products offered on our website are intended for airgun use only. Federal law prohibits using a product in any way not consistent with its intended use. It is the purchaser's responsibility to know and comply with all applicable state, county, and local laws and ordinances. Dismiss
Reviews
There are no reviews yet.