Eaglevision Scope Cam for GP 9,10,11,12 Hero Black
Two Bar or Collet Holder Versions
Two Bar or Collet Holder Versions
$294.00–$405.00Price range: $294.00 through $405.00
A very high-quality scope camera unit made to support the GoPro 9, 10, 11. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.
Collet Clamp System includes:
1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
1 x GOPRO Housing 9, 10 ,11 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10 and 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
1 x 2B-USH which includes: Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws 34 mm to 30 mm Ring Adaptor 34 mm to 25 mm Ring Adaptor
1 x 2B-UCH which includes: 2 x Aluminium Bars (17 mm long) 1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key 2 x Ball Screws 2 x Ball Grab Screws
1 x GOPRO Housing 9,10,11, 12 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10, 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. The lens is not part of this kit. Do not use with stock lens. Here is a link to the lens if you need one EAGLEVISION LENS KIT
1 x case The new waterproof case will allow you to store your camera mounting system tidy and safe.
1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a great video from Eaglevision Cam demonstrating how to replace the lens on your GoPro 9-11 or 12 Camera
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.
Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Here are some valuable tips to help you record the best quality video: 1. Use a good scope with decent lens clarity and a larger objective to gather maximum light. 2. Use a high-quality camera for recording; any action camera with a minimum resolution of 1920×1080 and 120 Frames per second. For the best slow-motion capture, 240FPS is preferable. 3. Obtain a good quality fixed camera lens like our 4K 1/1.8” 12MM for the GoPro. 4. Ensure that the scope and camera are set up and aligned correctly. 5. Use lower magnification with the scope, you will notice improved quality by using a fixed magnification, eg. 10×44 (Eaglevision does not recommend over x 10 magnification with the most common scopes on the market). 6. An optical zoom is preferred over digital zoom, which makes a lower image quality.
Additional information
Weight
16 oz
Dimensions
8 × 6 × 2.5 in
Image Split
50% x 50%, 25% x 75%
Attachment Method
USH-46, Two Bar System
Reviews
There are no reviews yet.
Be the first to review “Eaglevision Scope Cam for GP 9,10,11,12 Hero Black” Cancel reply
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using GoPro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens, and because it is 12mm, you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
Custom GoPro fitting Lens
We stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.
Please note: The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC
Just click HERE to be redirected to this product on his website. Be sure to tell Bob that Hajimoto sent ya ?
Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service
The service executes the following:
Reduce barrel length by 2.5″ to remove the choke.
Recrown barrel.
We provide a new shorter replacement barrel shroud.
This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.
Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.
The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.
Any outstanding balance must be paid before we ship out the service order.
The PatchWorm Pocket Field Kit (PFK) is made entirely of durable nylon and is designed to pull a clean patch with every stroke. It’s a far more refined alternative to pulling a dirty snake through your barrel…
This universal cleaning kit is so compact, it fits comfortably in a shirt pocket. Standard rifle rods are 36″ long from tip to head (not including the extra “tail” for easy extraction should the rod get stuck for any reason) and will clean up to 28″ barrels.
The rifle version has 8 color-coded cleaning heads:
.20 cal (green) – permanently attached .22 cal (white) .243 – .284 cal (black) .308 – .348 cal (red) .355 – .40 cal (purple) .41 – .45 cal (orange) .50 – .54 cal (blue) 12 gauge (yellow)
The PFK comes with dozens of wet (with Ballistol Sportsman’s Oil) and dry patches (7/8″ diameter), suitable for all bore sizes through .35 caliber. Larger 1 1/4″ diameter patches are available separately for the larger calibers. Reusable flip-lid containers are included for convenient storage.
Fouling is most easily removed while the barrel is still warm. Slide on a cleaning head, pierce 1 wet patch, feed into the chamber, and pull straight from the muzzle. Flip patch, pull again, remove the wet patch. Pierce 1 dry patch, repeat. Where a range of calibers is specified for a cleaning head, a second patch can be added (stacked on top of the first) for the larger caliber to achieve a tight finishing stroke.
All products offered on our website are intended for airgun use only.
Federal law prohibits using a product in any way not consistent with its intended use.
It is the purchaser's responsibility to know and comply with all applicable state, county, and local laws and ordinances. Dismiss
Reviews
There are no reviews yet.