Super Tune Kit (STK) for Gauntlet 1 and 2

Gauntlet STK
(2 customer reviews)
Sale!

Gauntlet STK

$75.00 – $93.00

THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1) 

For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

CONTENTS:

  • Adjuster Plug Assembly.
  • Smaller, Lighter Composite Poppet.
  • Hajimoto Hammer Spring (Black Long)
  • Lighter Trigger Spring (Bright Small).
  • 5/64″ Allen Wrench For Adjusting Power.

The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

Be sure to follow my written instructions in the document below.
Use the video to install but follow these written instructions to adjust and tune the STK:

Written Detailed Tuning Instructions for the STK

More details below.
Always read the content below because any revised instructions, video, photos, or other links will be there.

Clear
SKU: HPGSTK Categories: , , , , , Tags: , , , , , , ,

Description

Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation.

Here is the installation video for the Super Tune Kit which shows the entire installation procedure.

YOU MUST FOLLOW THESE WRITTEN INSTRUCTIONS AS THEY CONTAIN THE LATEST INFORMATION:
Written Detailed Tuning Instructions for the STK

For the generation Gauntlet 1 and Gauntlet 2 (not the Gauntlet 2SL) the spacer is not reinstalled.

At minute marker 6:25 the SPACER (#25) does NOT get reinstalled. I don’t mention this in the video but I do not install it (#25) either.

If air is leaking out of the barrel as fast as you put air in the tank, here are some steps to to correct the issue.

1) Make sure the gun is on safe.

2) Cock the rifle so nothing is pushing the valve poppet open.

3) If it still leaks you may have to perform a more aggressive poppet valve burnishing technique known as the sandpaper technique as detailed in Travis’s video here:

Link to the original Gauntlet Schematic:
Umarex Gauntlet Schematic Drawing

GAUNTLET 2 POWER ADJUSTER HOLE LOCATION

Additional information

Weight 2 oz
Dimensions 3 × 2 × 1 in
Generation

Gauntlet 1, Gauntlet 2, Gauntlet 2 SL
Caliber

, ,

2 reviews for Super Tune Kit (STK) for Gauntlet 1 and 2

  1. ROBERT FUNK (verified owner) –

    100% get this for your Gauntlet .25!
    My Gauntlet .25 has a larger 22 cu. in. bottle and the reg turned up to 2100 psi.
    I installed this kit and had an issue. No fault of Hajimoto Productions. 100% my own doing. I emailed him and sent photos. He had the fix right away.
    I sent 3 mags across the chronograph after that with 25.4gr JSB Exact Kings at 895 fps or 45 ft. lbs. the spread was a whopping grand total of 5 fps!! Insane! You talk about consistency! WOW!
    If you get this kit be sure to order the O-Rink kit. I can almost guarantee you will “scalp” some O-Rings in the process. Just the this gun was made.
    It is really nice having the option of adjustability along with a much more efficient valve setup on your Gauntlet.
    Customer service Can’t be beat either! Hajimoto is a real awesome Dude!

  2. jimmygraves20 (verified owner) –

    Wow! I had no idea what this upgrade would do for me.
    I was a little disappointed after making a few changes but everything came together I started playing around with the hammer preload adjuster.
    I installed a 22 cu in bottle with a new regulator set at 2200, new rings, a high travel valve stop, and the Super Tune Kit in my Gauntlet 1 .25 cal. I started out getting around 920 fps with 33.95 JSB’s. HOWEVER, I was only getting about eight shots before it started falling off and after about 16 shots my overall pressure went below 2000 psi. It was hitting hard and pretty accurately but I got tired of filling it up. (I actually forgot about the power adjuster) I took the regulator down to 2000 and started playing around with the power adjuster. Eventually, I landed on about 805 fps and was very accurate. The most important thing that I stumbled across is that the power adjuster really helped me increase my shot count. I was getting about 25+ – 805 fps shots. Even after it dropped off my poi was still pretty good.
    Also! The gun is so smooth, it was kicking quite a bit before but now it’s perfect. I was hitting a small 1/2″ socket at 50 meters and killing my paper. It feels so good, this must be the sweet spot for my gun, everything just came together because now I could simply adjust the hammer. I didn’t know too much about tuning and harmonics so I watched a bunch if vids, now I have a little better understanding as to what I was doing.
    THIS KIT IS A GAME CHANGER! MANY MORE CONTROLLED SHOTS AND VERY SMOOTH/QUIET!!!!!!

Add a review

You may also like…

  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options
  • Umarex Gauntlet Regulator Shim Pak
    $18.50
    Umarex Gauntlet Regulator Shim Pak
    $18.50

    Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

    I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

    The shim kit contains:

    • 2 – #5 Shims.
    • 1 – #3 Shim.
    • 2 – #2 Shims.
      (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

    To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
    To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
    The included two #2 shims are for minor adjustments if you have a finicky regulator.

    DETAILED LESSON/EXAMPLE:
    Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

    Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

    You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

    If you rapid fill, there is a good chance you will pop your burst disc.

     

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options

Related products

  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options
  • Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
    Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

    Air Stripper comes with o-ring and silicone grease for installation.

     

     

    Select options
  • Sold out!
    HP Strip Stak Pak for Origin
    $47.00

    Origin .22/.25

    HP Strip Stak Pak for Origin
    $47.00

    NEW ENHANCED DESIGN

    UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Umarex Origin
    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.