$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.
This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.
You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
Ninja M18*1.5 Threaded High Pressure Regulator
Made for 4500PSI Metric M18*1.5 threaded bottles.
American made Ninja Regulator.
Custom output pressure for your
needs.
We build the regulator to any custom
output pressure in 100 PSI increments.
| Weight | 9 oz |
|---|---|
| Dimensions | 5 × 2.5 × 2.5 in |
| Regulator Output | 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, CUSTOM |
You must be logged in to post a review.
As the name implies, this is the Ultimate Gauntlet 2 build.
The Gold, Platinum and Ultimate Packages are the only builds where data trends are supplied with your build. You received detailed data sheets with a matrix to show exactly how your rifle performed and what adjustment limits you can perform in easy to follow terms. Different ammo weights are charts as well as actual shot results of your rifle as it was tuned to achieve maximum accuracy.
You get optic, 22.5ci 4500PSI carbon fiber tank, externally adjustable regulator, hammer preload adjustment, Two stage trigger, DonnyFL Sumo suppressor, bipod, 300BAR portable compressor for air independence and so much more!
Important note: Our Sidelever cocking system requires the shooter to hold the Sidelever rearward during magazine changes
We supply you with a Umarex Gauntlet 2 completely tuned and every option available to go out and blasticate!
See way down below for a detailed description and breakdown of what is included.
Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet. Please use the notes section to communicate any special requests like trigger preferences or if you’re buying a scope and want a specific zero distance.
Lastly, if an item you want is out of stock and therefore your unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.
When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Commonly asked questions once the Tuned Gauntlet is received:
Question: How do I change the power?
Answer: Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STK
Question: How do I tune using the STK?
Answer: For written instructions on how to adjust the Super Tune Kit, click the below link.
WRITTEN STK ADJUSTMENT INSTRUCTIONS
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
Tatsu 1.6 x 4.25 inches
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
Gauntlet 1 and Gauntlet 2
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
Reviews
There are no reviews yet.