NateChrony V2.5 and SteadyShot Versions

NateChrony V2.5 and SteadyShot Versions
NateChrony V2.5 and SteadyShot Versions
NateChrony V2.5 and SteadyShot Versions - Image 2
NateChrony V2.5 and SteadyShot Versions - Image 3
NateChrony V2.5 and SteadyShot Versions - Image 4
NateChrony V2.5 and SteadyShot Versions - Image 5
NateChrony V2.5 and SteadyShot Versions - Image 6
NateChrony V2.5 and SteadyShot Versions - Image 7

NateChrony V2.5 and SteadyShot Versions

$130.00 – $165.00

Take your training to the next level – we’ve added motion sensors to the NateChrony!

We’ve taken the best Chronograph on the market to the next level – by adding a 6-axis inertial measurement unit to it. You can now see how your muzzle is moving when you shoot – is it steady? is the movement smooth? are you consistent?

The SteadyShot also has the advanced software with new features:

  • Full automatic fire measurement, up to 1,250 shots per second.
  • Airsoft specific screens:
    fps & J, with a rate of fire for each shot
    Pre-programmed & quick change bb weights
  • Field mode – quickly check if you’re above/below 3 programmed speeds/powers
    You can see your movement on each axis via 3 separate graphs:

    • Left/Right
    • Up/Down
    • Back/Forth

You can also view your movement in a 3 dimensional line graph – showing how you moved in space.

  • All NateChrony adapters are fully compatible with the SteadyShot.

Requirements:

You’ll need this stuff to use the NateChrony – typically if you have a mobile phone you’re set!

  • If using a mobile phone/tablet, it should be less than 5 years old & up to date.
  • Working knowledge of your device, including browser and internet technologies
  • Working knowledge of any additional security software installed on your device
  • A 5v standard USB power source
  • A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
  • A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
  • You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu – Shoot, you hear the speed and power readout
    NOTE: if you have software or settings on your device that does not permit this – you  may have issues
Clear
SKU: HPNTCHNY-2.5 Categories: , , , , , , Tags: , , , , , , ,

Description

Specifications

  • Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
  • Resolution: <0.1fps shot to shot at 1,000fps
  • Weight: 60g/72g (Polymer/Aluminium)
  • Save >1,000 shots across 5 save slots
  • Max speed: 2,500fps (software limit – can be increased)
  • Full export of all raw data to CSV
  • Max rate of fire: 1,250 shots per second
  • SteadyShot capture time: 0.75-25sec (software config)
  • Air powered guns only
  • CO2 power can cause vapour, not recommended (long barrels on warm days may be ok, cold barrels on cold days will cause issues)
  • Maximum caliber: ~45-50 cal (depending on power)
  • Maximum power: 150-200 fpe

Included with the NateChrony SteadyShot:

  • The Chronograph: The thing you pop on the end & shoot through
  • Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90 degree connector
  • The Software: Standard NateChrony software
  • Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
  • Soft Case: A carrying pouch to put it in
  • Test Pellet: A plastic pellet for the drop test (inside the soft case)
  • Phillips Driver: A phillips driver for the adapter grub screw
  • Sticker: for maximum accuracy performance

Additional information

Weight 6 oz
Dimensions 6.25 × 3.25 × 2 in
FINISH MATERIAL

POLYMER, ALUMINUM
FINISH

BLACK, STONE, TIMBER
STEADYSHOT

With SS, With out SS

Reviews

There are no reviews yet.

Be the first to review “NateChrony V2.5 and SteadyShot Versions”

You may also like…

Related products

  • Shogun 1.6 x 8 inchesShogun 1.6 x 8 inches
    $185.00
    Shogun 1.6 x 8 inches
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    Select options
  • Sale!
    Super Tune Kit (STK) for Gauntlet 1 and 2Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $93.00

    Gauntlet STK

    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $93.00

    THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
    IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

    The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

    Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile. (Power examples given are the .22 caliber version Gauntlet 1) 

    For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
    BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

    CONTENTS:

    • Adjuster Plug Assembly.
    • Smaller, Lighter Composite Poppet.
    • Hajimoto Hammer Spring (Black Long)
    • Lighter Trigger Spring (Bright Small).
    • 5/64″ Allen Wrench For Adjusting Power.

    The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
    Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

    Be sure to follow my written instructions in the document below.
    Use the video to install but follow these written instructions to adjust and tune the STK:

    Written Detailed Tuning Instructions for the STK

    More details below.
    Always read the content below because any revised instructions, video, photos, or other links will be there.

    Select options
  • Flex Reg Hajimoto ConfigurationsFlex Reg Hajimoto Configurations
    $159.00 – $169.00

    5/8″-18UNF Threaded Unit

    Flex Reg Hajimoto Configurations
    $159.00 – $169.00

    Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
    Say goodbye to only one fixed output pressure!
    The user has an 800 – 900 psi adjustment swing!
    Requires minor forestock modification.
    The regulator thread is 5/8-18UNF (Bottle Thread) and Typical Paintball Threads of .825-14 NGO (PCP Thread).

    Please note the Flex regulator can be used with any Air, Co2, or Nitrogen driven air gun not just the Gauntlet,  providing it has the correct threading.

    The Ninja Flex regulator is available in any 900 psi spread to a maximum of 3100 psi output but for the Gauntlet select from the proper configuration.
    If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

    How to read the below configurations
    Example: Flex Reg .22 | 4500/1600 to 2400 psi
    Flex Reg .22 = Regulator Type for .22 caliber
    4500/ = The bottle’s maximum fill pressure
    1600 to 2400 psi = The output range of the Flex Reg

    Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex Reg .177/.22 |3000/600 to 1500PSI

    Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex Reg .25 | 3000/1500 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
    Stock .22 | 4500/1900PSI Regulator
    Flex Reg .22 | 4500/1500 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
    Stock .25 | 4500/2100PSI Regulator
    Flex Reg .25 | 4500/1500 to 2400PSI

    Flex Reg Configuration For G30 Cal
    Stock .30 | 4500/2800PSI Regulator
    Flex Reg .30 | 4500/2100 to 3100PSI

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.