Gauntlet Barrel Tune

$110.00

This service is for all Umarex Gauntlets regardless of generation or caliber. Including all .177, .22, .25 and .30 caliber versions.

Service to increase the airflow of the air rifle to allow for better power, performance, and efficiency. Barrel transfer port increased, Barrel leade is properly set & polished, Bore is lapped and polished, and the crown is machined and polished.

Categories: ,

Description

The service executes the following:

  • We increase the transfer port not to exceed 80% of the bore diameter. (Better air transfer and power generation)
  • Properly set the barrels leade/chamber depth and polish. (Smoother chambering of projectiles)
  • Recrown and polish. (More stable delivery of projectiles compared to a damaged crown)
  • Clean and lap bore. (Smoother projectile travel down the barrel)

Please use the notes area here to provide what PCP, Caliber, and as much detail as you can why you feel the barrel is in need of service.

Please ship us only the barrel from the PCP.  Be sure to uniquely mark your barrel so that when the incoming inspection report and photos are shown the marking can also be seen.

One way to achieve this is to clean the outside of the barrel with brake cleaner or carb cleaner, dry the spot, and either scribe the barrel with the last four of the serial number or wrap the now cleaned area of the barrel with tape that is wrapped but stuck to itself with the PCP’s serial number and customer email address.

The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

When you place the order for the above-described service, you will receive an order received notification. Shortly after that, you will receive a second notification with details associated with packaging and shipping them in for service.

Once the order is received, a follow-up email will be provided and depending on the service request will contain detailed shipping instructions which will include shipping addresses and label information information.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need calculated and communicated to you prior to the order shipping back.

This balance will need to be paid before the shipping of the order.

The below video shows what we do to the chambering area of the barrel to correct the hard loading issue that happens when the leade is too steep or sharp.

Reviews

There are no reviews yet.

Be the first to review “Gauntlet Barrel Tune”

You may also like…

  • $625.00
    Hajimoto Tune My Gauntlet G1 or G2
    $625.00

    We completely tune your supplied Gauntlet 1 or 2 which includes everything listed in the section below.

    The service includes a very detailed and time-consuming incoming inspection report that includes photos and other relevant information that detail the condition of the airgun and all of its pieces and parts. This report is provided to you and you must be reviewed and authorized in order for the work to continue.

    Ordering procedures:

    • Add all services and items to your cart.
    • Be sure to use the notes section to communicate any known issues or special instructions.
    • Check out.

    Shortly after the order is received,  you will receive an email notification containing shipping information that will include labeling and packaging requirements.

    To better understand how the Gauntlet is transformed from a static you get what you get type of airgun, into an adjustable power and tunable PCP, take a look at this video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition in order to get it to fly at the best rate of travel for that particular ammunition.
    HOW TO ADJUST POWER WITH STK

    We will build your order based on the information provided from the questionnaire as well as any specific requests, and before the airgun ships, any credits or additional charges will be settled.

    Select options

Related products

  • G30 Barrel Shorten and Recrown
    $110.00

    For G30 and G30SL

    G30 Barrel Shorten and Recrown
    $110.00

    Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

    The service executes the following:

    • Reduce barrel length by 2.5″ to remove the choke.
    • Recrown barrel.
    • We provide a new shorter replacement barrel shroud.

    This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

    Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
    This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

    The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

    Any outstanding balance must be paid before we ship out the service order.

    Select options
  • Sale!
    Gauntlet 30 SERVICE Builder
    $30 to $1000
    Gauntlet 30 SERVICE Builder
    $30 to $1000

     

    Hajimoto Productions Gauntlet .30 Service Selector/Builder

    Important Information:
    This builder is used for G30 OWNERS who understand that they will be sending in their G30 to have modifications performed. If you are looking to purchase any of the parts listed below, you will want to leave SERVICE and use the SEARCH for the PART you want. 

    So you didn’t know we offered turnkey G30 packages? So you already own a G30 and wish you could get were able to have some of the service modifications that are available on some of our Airgun Packages? Well, we got you covered with this G30 specific Service Builder.

    This menu system allows you to select what you want or what you don’t want and when you’re done you have a complete turnkey service request for your Gauntlet .30 Caliber!

     

    • The Gauntlet 30 Caliber
      Shortly after your order is received, we will respond with the shipping information as well as what your shipping label needs to contain.

    The shipping you pay at checkout is only a placeholder and the actual shipping fees associated with this order will be adjusted so that you only pay what is required once we receive your package and calculate the actual size and weight of your package. In some cases, you will be required to pay more and in others, you will receive a refund.

    Please note that this service is exempt from any discount campaigns.

     

     

    Select options
  • $45.00

    Regulator Service or Pressure Change

    Regulator Service or Pressure Change
    $45.00

    This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

    Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

    Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

    When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

    This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

    Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.