Uncategorized

$20.00
HP Baffle Stack For Umarex Gauntlet
Rated 5.00 out of 5
$20.00

Part fits either the original Gauntlet or the Gauntlet 2

THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

Select options
$21.95
Ninja Regulator Rebuild Kit Part #NINJARBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #NINJARBK – Rebuild Kit for Ninja NON Pro Regulators.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
Ninja PRO V2 Regulator Rebuild Kit Part #PRORBK
$21.95

Ninja Paintball Tank Regulator Replacement Part #PRORBK – This Rebuild Kit for Ninja Pro V2 Regulators ONLY.

Like the one below:

This rebuild kit is not for the Umarex Gauntlet Stock Regulator.

User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

Select options
$21.95
3/4″ Black face 3000PSI gauge
3000PSI 1/8″ NPT Pressure Gauge
$21.95
- 1/8″ NPT THREAD
- 3000PSI DIAL MAX
Select options
$21.95
Mini 5000PSI face
Ninja Black Mini Gauge
$21.95

Ninja Paintballs mini pressure gauge.

Face is black and the dial reads to 5000PSI

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
$24.95 – $30.00
Ninja Paintball X Reg Rebuild Kit #NINJARBKX
$24.95 – $30.00

Ninja Paintball Tank Regulator Replacement Part #X_REG_RBLDKT – This Rebuild Kit for Ninja X Regulators ONLY.
Like the one below:

Other variants are for the Gauntlet 2 in .22 caliber, .25 caliber, and .30 caliber. Be sure to select the proper kit type. User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

There is a Flex Reg option but it requires photos so we can be sure what variant you have.

Select options
$28.00
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5
$28.00

Part fits either the original Gauntlet or the Gauntlet 2

You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$30.00 – $35.00
Fits Gauntlet 1, 2 even the .30 Cal
HP Barrel Band For Umarex Gauntlet
Rated 5.00 out of 5
$30.00 – $35.00

Available in the classic Picatinny rail version or the 15mm thick rail less version.

Fits both the original Gauntlet as well as the Gauntlet 2 including the G30 or G30SL!

Select options
$30.00
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00

This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

Select options
Sale!
Original price was: $45.00.Current price is: $30.00.
WestHunter Adjustable Height Picatinny/Dovetail Scope Rings
Original price was: $45.00.Current price is: $30.00.
Westhunter Adjustable height scope rings
- Westhunter adjustable scope rings use a double fastener configuration at the bottom for maximized clamping force resulting in more stability of the optical system.
- The Picatinny style will only work with Picatinny rails—will not work with Weaver rails. Quick installation and disassembly can be achieved by hand. The adjustable height design of Picatinny scope rings allows the shooter to find the most suitable and comfortable height of scope, position the center of the riflescope tube at a height of 32mm(1.26″) to 38mm(1.5″) from the base, fits 1 inch and 30mm tube optics
- The Dovetail style fits 11mm dovetail rail, net weight 153g(5.4oz). The adjustable height design of Dovetail scope rings allows the hunter to find the most suitable and comfortable height of scope, center height 36mm(1.42″) to 42mm(1.65″), fits 1 inch and 30mm tube optics with up to an 80mm outer objective diameter.
- Precision CNC machined from 6061 T6 aircraft-grade aluminum and finished in a hard anodizing for a superior appearance.
- The finishing touch to the dovetail rail and optic combination.
- Adjustable Series rings combine rock-solid reliability and strength with high-quality precision machining to ensure ultimate accuracy and consistency.
Specifications listed below
Select options

BACK FROM RMAC

PLEASE BE PATIENT WITH US

AS WE GET CAUGHT UP