-
TIP System
Read moreThis interface to pay any outstanding service balances, odd nonlisted item purchases, or if you simply want to leave a donation, this is the place to do that.
Easy 1-2-3 process
- Please use the NOTES section to tell us what the Payment is for.
- Please include an order number if the payment is related to an existing order.
- Enter the payment amount.
- Add the transaction to the Cart.
- Click on VIEW CART to review.
- If you are satisfied with the cart contents, click on CHECKOUT.
Thank you!
-
$4.00Ninja fill port o’ring
Fill Port O’ring Fits Ninja
$4.00Select options5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators
-
Sold out!
Original price was: $11.00.$7.50Current price is: $7.50.clamps onto 20mm Pic Rail
Picatinny Rail Anti-cant level
Original price was: $11.00.$7.50Current price is: $7.50.Read moreBubble Level Fits 20mm Picatinny or Weaver Rail Riflescope Mount
-
$8.00Tank to PCP O-rings (10 Pak)
$8.00Select options10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT
-
Sale!
$10.99 – $99.99Dead Center Pellets
JTS Dead Center Pellets
$10.99 – $99.99Select options
JTS Dead Center Pellets are the result of 2 years of development resulting in a premium airgun pellet line that utilizes the latest manufacturing equipment and processes to ensure quality and consistency. JTS engineers used aerodynamic principles when designing these pellets to ensure that every shot you make is accurate.
Even the screw-off lid on the tin is designed with air gunners in mind. The pellets are packed in each tin with foam on top and on the bottom to help keep these old boys pristine when you are ready to load them.
Best shipping value is realized when you buy in four sleeve quantities.
Available in:
- .22 caliber 18.1 gr 250 pcs per tin
- .25 caliber 25.3 gr 150 pcs per tin.
View the video below to see these pellets in action from our TacVenger Bullpup bottle gun at 50 yards!
-
Sold out!
$14.00Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00Read moreZero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.
-
$14.5020oz Double wall Stainless
Hajimoto Productions Hot or Cold 20oz Tumbler
$14.50Select optionsHajimoto Merch
The tumbler capacity 600 ml/ 20 oz, the insulated cup can hold cold or hot beverages, like water, tea, milk, wine, boiled water, coffee, juice, and more.
Clever and Practical Design: the coffee tumblers are made of quality 304 stainless steel material, with a reliable double wall design to insulate the interior beverage in an ideal temperature, and the lids are made of quality ABS material, equipped with a detachable rubber ring to achieve a better sealing effect, and there is a hole on the lids for inserting straws(not included), and the push lid design prevents drinks from spilling.
Fits most cup holders.
Dimensions:
- Top Width: 3.25″
- Height: 6.65″
- Bottom width: 2.75″
-
$15.00 – $70.00Bipod and Picatinny Rail
$15.00 – $70.00Select options
Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
-
$17.00Gauntlet 1 and Gauntlet 2
Umarex Gauntlet Tune O-ring Kit
$17.00Select optionsHajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
-
Sold out!
$17.00DISCONTINUEDNinja Magna Cap Fill Nipple Cover – BLACK
$17.00Read morePatented Magnetic design Lightweight Aluminum Helps to keep the dirt out!
MADE IN THE USA!!!!
-
$18.50Umarex Gauntlet Regulator Shim Pak
$18.50Select optionsHajimoto Productions Regulator Shim Kit For Umarex Gauntlet
I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.
The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
(Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.
You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.
If you rapid fill, there is a good chance you will pop your burst disc.
BACK FROM RMAC
PLEASE BE PATIENT WITH US
AS WE GET CAUGHT UP
This will close in 20 seconds