Umarex Parts/Mods

[wcas-search-form]
  • HP Strip Stak Pak for Akela/Kratos
    $40.00

    Akela/Kratos Strip Stak Pak

    HP Strip Stak Pak for Akela/Kratos
    $40.00

    INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

    Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
    A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
    The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.     

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • $40.00

    Hammer Adapter

    Umarex Hammer M18x1 Shroud Adapter A60
    $40.00

    This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

    This adapter does not fit on the Umarex Hammer Carbine.

    Select options
  • Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
    An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

    BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
    Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

    Air Stripper comes with o-ring and silicone grease for installation.

     

     

    Select options
  • $45.00

    Regulator Service or Pressure Change

    Regulator Service or Pressure Change
    $45.00

    This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

    Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

    Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

    When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

    This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

    Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

     

    Select options
  • Umarex Origin 1/2 x 20 Adapter #A70
    $45.00
    Umarex Origin 1/2 x 20 Adapter #A70
    $45.00

    Specifically for the Umarex Origin

    Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

    This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.

    This part is designed and manufactured by DonnyFL

    Select options
  • HP Strip Stak Pak for Origin
    $47.00

    Origin .22/.25

    HP Strip Stak Pak for Origin
    $47.00

    NEW ENHANCED DESIGN

    UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Umarex Origin
    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options
  • HubenPower Regulator Tester
    $50.00

    Reg Pressure Tester

    HubenPower Regulator Tester
    $50.00

    High quality HubenPower reg tester.

    Features

    • Micro threaded activation knob.
    • Built in quick action pressure relief knob.
    • High pressure gauge to 6000 psi.

    Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.

     

    Select options
  • $50.00$60.00
    Gauntlet Bottle Shroud Mod
    $50.00$60.00

    This service is to modify the bottle shroud to allow the proper fit for the Power Flex Combo carbon fiber tank and flex regulator:

    The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your forestock or bottle shroud be sure to keep the screws, star washers, and sling stud as I will not need those. If you have any type of rail installed for a bipod it needs to be removed prior to shipping me the bottle shroud.

    If you select the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

    Cerakote or color change is not included photo is from the 2021 Hajimoto Edition for illustration purposes.

    Select options
  • Gauntlet Barrel Chambering Correction
    $50.00

    For G30, G30SL or Any Gen Gauntlet

    Gauntlet Barrel Chambering Correction
    $50.00

    Service to correct the Gauntlet series of PCP’s. Calibers include .177, .22, 25, 30, or the 30SL, hard chambering of slugs issues.

    Select options
  • G Barrel Transfer Port Work
    $50.00

    For all G barrels in all calibers

    G Barrel Transfer Port Work
    $50.00

    Service to improve the barrels transfer port by enlarging and polishing the inlet. All calibers benefit from this service when trying to achieve maximum power and efficiency from your build.

    Select options
  • $55.00
    Trigger work
    $55.00

    The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your trigger group, you simply decock and degas the Gauntlet, remove it from the stock, and remove the two fasteners that hold the group to the bottom of the pressure tube.

    If you elect the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

    Select options
  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options