Regulators & Tanks - Hajimoto Productions LLC

Sold out!
$21.95
Ninja SCA
Ninja Paintball Slide Check Assembly
$21.95

The Ninja Slide Check Assembly (SCA) is for Remote Coils, CO2 Fill Stations, Regulator testers, and more!

The SCA lets you instantly stop the pressure through your remote line or tester, degassing it so you can quickly and safely disconnect from tanks or PCP’s.

The Ninja SCA is what Hajimoto Productions uses in its fully assembled and tested Paintball Regulator Tester and comes with a large-faced gauge for easy reading.

Read more
$21.95
UX 6000PSI GAUGE
Umarex 6K Gauge
$21.95

This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

This gauge will not fit the Ninja Paintball Version

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 5000psi WHITE
24MM Mini Gauge 5K (WHITE)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 5000psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 3500psi COLOR
24MM Mini Gauge 3.5K (COLOR)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 3500psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $45.00.Current price is: $24.00.
8mm Threaded 6000psi mini gauge
24MM Mini Gauge 6K
Original price was: $45.00.Current price is: $24.00.

Small 8mm threaded 6000psi PCP gauge.

Fits Avenger PCP

Select options
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
$24.95 – $30.00
Ninja Paintball X Reg Rebuild Kit #NINJARBKX
$24.95 – $30.00

Ninja Paintball Tank Regulator Replacement Part #X_REG_RBLDKT – This Rebuild Kit for Ninja X Regulators ONLY.
Like the one below:

Other variants are for the Gauntlet 2 in .22 caliber, .25 caliber, and .30 caliber. Be sure to select the proper kit type. User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)

There is a Flex Reg option but it requires photos so we can be sure what variant you have.

Select options
$30.00
Oil Water Separator Cartiridge
$30.00

Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.

Select options
$30.00
From 7/8″-14 to M18x1.5
Saber Tactical Tank Valve adapter
$30.00

This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks.

Select options
$45.00
Regulator Service or Pressure Change
Regulator Service or Pressure Change
$45.00

This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

Select options
Sale!
Original price was: $60.00.Current price is: $49.00.
M8, M10, and 1/8″ Threaded Digital Gauge
28mm Digital Pressure Gauge
Original price was: $60.00.Current price is: $49.00.
- 28MM Diameter
- M8, M10, or 1/8″ Threaded versions available
- Display in PSI
- Auto Shut off in 30 secs
- Digital Display 1% Accuracy
- Black Rubber Protective Sleeve
- Working pressure 0-4500psi
- Weight 32g
- Gauge body is made from high-grade brass
Select options