Parts

$21.95
Ninja UFA
Ninja Paintball Universal Fill Adapter
$21.95

The Ninja UFA (Universal Fill Adapter) is for Remote Coils, CO2 Fill Stations, Regulator testers, and more!

This unit also allows you to release air from any paintball tank safely for travel, maintenance, and testing. The Ninja UFA is what Hajimoto Productions uses in its complete Paintball Regulator Tester and comes with a large-faced gauge for easy reading.

Select options
Sold out!
$21.95
Ninja SCA
Ninja Paintball Slide Check Assembly
$21.95

The Ninja Slide Check Assembly (SCA) is for Remote Coils, CO2 Fill Stations, Regulator testers, and more!

The SCA lets you instantly stop the pressure through your remote line or tester, degassing it so you can quickly and safely disconnect from tanks or PCP’s.

The Ninja SCA is what Hajimoto Productions uses in its fully assembled and tested Paintball Regulator Tester and comes with a large-faced gauge for easy reading.

Read more
$21.95
UX 6000PSI GAUGE
Umarex 6K Gauge
$21.95

This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

This gauge will not fit the Ninja Paintball Version

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
Sold out!
$23.00
AR Pistol Grip
Magpul Beaver Tail Grip
$23.00

A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

Material: Dupont Zytel 30% glass filled nylon

Made in the USA

Read more
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 5000psi WHITE
24MM Mini Gauge 5K (WHITE)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 5000psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $40.00.Current price is: $23.00.
1/8″ NPT Thread 3500psi COLOR
24MM Mini Gauge 3.5K (COLOR)
Original price was: $40.00.Current price is: $23.00.

Small 1/8″ threaded 3500psi PCP gauge.

Fits Ninja Paintball Regulators

Select options
Sale!
Original price was: $45.00.Current price is: $24.00.
8mm Threaded 6000psi mini gauge
24MM Mini Gauge 6K
Original price was: $45.00.Current price is: $24.00.

Small 8mm threaded 6000psi PCP gauge.

Fits Avenger PCP

Select options
$24.95
Flex reg white face gauge
Ninja 4K White Face Gauge
$24.95
- 1/8″ NPT THREAD
- 4000PSI DIAL MAX
Select options
Sale!
$25.00 – $35.00
Includes G1, G2, G30, G2SL, & G30SL variants
HP Barrel Band For Umarex Gauntlet
Rated 4.67 out of 5
$25.00 – $35.00

Available in the classic Picatinny rail version or the 15mm thick rail less version.

Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!

Select options
Sale!
$25.00 – $30.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Stock Barrel)
$25.00 – $30.00
** THIS BARREL BAND IS FOR THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE – CLICK HERE IF YOU HAVE THE HAJIMOTO MODIFIED BARREL**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with stock barrel suppressor installed.
Select options
Sale!
$25.00 – $30.00
With and Without Rail 300cc or 360cc bottle
Notos Bottle Converted – Barrel Band (Modded Barrel)
$25.00 – $30.00
** THIS BARREL BAND IS FOR THE HAJIMOTO MODIFIED BARREL – CLICK HERE IF YOU HAVE THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE**

Available in two sizes and with or without Picatinny rail:
- 300cc/0.3L version
- 360cc/036L version
- Adds the necessary support and rigidity of the long bottle conversion assembly.
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK installed with our 300cc or 360cc carbon fiber bottle with a Hajimoto modified barrel installed.
Select options
$27.00
5 Piece Stak Pak W/Spring
Barra 1100z Stak Pak W/Spring
$27.00

Only fits the 19.25″ barrel length version. Middle to late 2023 produced 1100Z barrels were increased in length to 22.25″ eliminating the free space that used to allow a spring and baffles to fit.

Help quiet down your Barra 1100z with our custom-fit HP 5-piece Baffle Stak and tension spring. There are two different-sized baffles to help eliminate patterned harmonics in the air stream.

Select options
$28.00
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5
$28.00

Part fits either the original Gauntlet or the Gauntlet 2

You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$28.00
Adjustable Butt Stock
Butt Stock
$28.00

Buttstock Assembly, 6 Position, Mil Spec, Carbine, Black

Select options
$30.00
Intended for higher power builds
High Travel Valve Stop For Umarex Gauntlet 1 or 2
$30.00

This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

Select options
$30.00
Tube and Nut
Buffer Tube with Castle nut
$30.00

Made in the USA Mil Spec buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock

Select options
$30.00
Oil Water Separator Cartiridge
$30.00

Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.

Select options
$30.00
From 7/8″-14 to M18x1.5
Saber Tactical Tank Valve adapter
$30.00

This adapter allows you to convert the threads on our tank valve from 7/8-14 to M18x1.5. The M18x1.5 is common on carbon fiber gun tanks.

Select options
$30.00
Haji-Notos Mag 11 rounds
Notos Expanded Magazine
$30.00

Introducing the Haji-Notos 11 Shot Expanded Magazine!

This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

Please note that our design loads from the right.

Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

The Haji-Notos magazine works with a red-dot or optic but does not work with Umarex fixed fiber optic sights.

LOADING THE NOTOS MAGAZINE

Select options
$30.00
Small 13ci (213cc) 3000psi
13ci 3K PSI TANK
$30.00

A 3000psi 13ci (213cc) aluminum paintball style tank.
This is an industry standard 5/8″- 18 threaded bottle with a flat bottom.

This is the same bottle installed on the Original Gauntlet 1 in .177, .22 or .25 caliber PCP as shown below.

Airgun is not included

Select options
$33.00
Gauntlet Mini Magazine
HP Gauntlet Mini Mag
$33.00
Introducing the HP Mini Magazine.

The old lidless design is being phased out. As inventory is exhausted, we will switch to the new magnetic lid style, as shown for the .177 and.22 caliber versions.

Fits all generations of Gauntlet

New Magnetic Lid Design! Smooth and reliable magazine that is shorter to allow a fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 caliber. It extends your capabilities by increasing the number of shots before requiring a reload.

The stands only 40.90mm (1.610″)

This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

Features
- An easy to load.
- Easy partial fill design.
- .177 = 16 shots.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ )
Select options
$33.00
Benjamin Marauder Mini Magazine
HP MROD Mini Mag
$33.00
Introducing the HP Mini Magazine.

The same reliable design as our expanded magazine but is slightly shorter to allow the magazine to fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Benjamin Marauder in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots between reloads. The magazine’s operation is smoother and offers a more reliable chambering of rounds.

WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

The stands only 40.90mm (1.610″ a little less than 5/8″)

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

Features
- Easy-to-load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = Holds 13 shots (Stock Mag Holds 10 Shots)
- .25 = Holds 11 shots (Stock Mag Holds 8 Shots)
- The magazine height is 40.90mm (1.610″ a little less than 1-5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$33.00
Avenger/Origin Mini Magazine
HP Avenger Mini Mag
$33.00
Introducing the HP Mini Magazine.

The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

The stands only 40.90mm (1.610″ a little less than 5/8″)

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ a little less than 5/8″)
- Mags also fit the Avenger Bullpup II
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options