-
Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00Select optionsPlease note that when you add a suppressor to this gun, it does not properly index the magazine. If you plan to single load and use a suppressor that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.
-
Sold out!
Hatsan Blitz 1/2 x 20 adapter #A84
$40.00Read moreThis part is designed and manufactured by DonnyFL
-
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00Select optionsFits the Benjamin Akela and Kratos PCP’s
This part is designed and manufactured by DonnyFL
-
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00Select optionsINCLUDES NEW ENHANCED AIR STRIPPER DESIGN
Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00Select optionsThis part is designed and manufactured by DonnyFL
-
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00Select optionsThis adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector
This adapter does not fit on the Umarex Hammer Carbine.
-
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00Select optionsHajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.
Air Stripper comes with o-ring and silicone grease for installation.
-
Hatsan QE 1/2 x 20 adapter #A24
$45.00Select optionsThis part is designed and manufactured by DonnyFL
-
Sold out!
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00Read moreSpecifically for the AV Avenger
Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.
This part is designed and manufactured by DonnyFL
-
HP Strip Stak Pak for PP750
$45.00Select optionsStrip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada -
Umarex Origin 1/2 x 20 Adapter #A70
$45.00Select optionsSpecifically for the Umarex Origin
Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.
This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
This part is designed and manufactured by DonnyFL
-
Beeman Underlever 1357 | 1358 Adapter #A86
$45.00Select optionsSpecifically for the Beeman 1357 / 1358
This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.
This part is designed and manufactured by DonnyFL