Moderators/Suppressor/Adapters - Hajimoto Productions LLC

$40.00
For the Gauntlet 1 or 2
Umarex Gauntlet 1/2 x 20 adapter #A23
$40.00

This part is designed and manufactured by DonnyFL

Select options
Sold out!
$40.00
Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
$40.00

Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

This part is designed and manufactured by DonnyFL

Read more
$40.00
Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00

Please note that when you add a suppressor to this gun, it does not properly index the magazine. If you plan to single load and use a suppressor that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.

Select options
$40.00
Hatsan Blitz M18X1 Adapter A117
$40.00

This part is designed and manufactured by DonnyFL

This adapter allows you to screw on an airgun suppressor with M18x1 threads.

Select options
$40.00
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00

Fits the Benjamin Akela and Kratos PCP’s

This part is designed and manufactured by DonnyFL

Select options
Sold out!
$40.00
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00

INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Read more
$40.00
Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00

This part is designed and manufactured by DonnyFL

Select options
$40.00
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

This adapter does not fit on the Umarex Hammer Carbine.

Select options
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$45.00
Hatsan QE 1/2 x 20 adapter #A24
$45.00

This part is designed and manufactured by DonnyFL

Select options
$45.00
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00

Specifically for the AV Avenger

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This part is designed and manufactured by DonnyFL

Select options
$45.00
HP Strip Stak Pak for PP750
$45.00

Strip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada

Select options