Accessories

  • Hajimoto’s Beeman 1358 Mini Magazine
    $33.00 – $35.00

    Beeman 1358 Mini Magazine

    Hajimoto’s Beeman 1358 Mini Magazine
    $33.00 – $35.00
    Introducing the HP Mini Magazine.

    New magnetic lid design! This magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    Removeable magnetic lid allows you to drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .177 = 18 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sold out!
    Avenger Shroud Adapter
    $33.95
    Avenger Shroud Adapter
    $33.95

    The Newer Avengers use a threaded plastic shroud adapter which the shroud screws onto. The stock plastic mount is weak and prone to breaking if over tightened which means you cannot tighten it down adequately. This can lead to the shroud being able to move around a bit which will affect accuracy. This high-quality adapter will fix those issues and create a more consistent shooting airgun. Or just replace a broken or damaged shroud mount.

    The AE Swede adapter is CNC machined from 7075 high-strength aluminum part and utilizes two set screws. You can clock the piece however you want and do not need the stock barrel detents to lock in place. This helps when holes have been drilled in the shroud at the rear for extra sound deadening ability.

    Read more
  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [â–‘â–‘] <â–‘] <â–‘â–‘] <â–‘â–‘] <â–‘] <â–‘] <â–‘â–‘] <â–‘â–‘] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sale!
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.

    Stak Pak for Hatsan QE shrouds (.357, .457, or QE screwed in place open sights Not Included)

    Unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the first full-sized baffle and then arrange the stack as shown in the packaging.

    A ten-piece kit that directly replaces the two hair curler style baffles inside any Hatsan with a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove noise and turbulence in the air stream. The baffle stack rides on a high-tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357, .457, and models with the fixed sight on the QE swell that are screwed into an internal ring.

    The result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.

    If your QE shroud has a fixed sight that is screwed to a ring that is inside the QE swell section of the shroud, you cannot use the HP STAK PAK.

    Installation video is listed in the DESCRIPTION section below

     

    Select options
  • RTI Priest 2 Shroud Extender #A66
    $35.00

    RTI Priest 2 Shroud Extender #A66

    RTI Priest 2 Shroud Extender #A66
    $35.00

    If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so.

    Features:

    • 6061 T6 aluminum
    • Knurled cap
    • Matte black anodize
    Select options
  • Sold out!
    $35.00
    DonnyFL KOI/Tanto Endcaps
    $35.00

    KOI and Tanto End caps in 1/2 x 20 threads

    Select options
  • HP Avenger Exp Mag
    $35.00 – $40.00

    Fits both Avenger and Origin

    HP Avenger Exp Mag
    $35.00 – $40.00

    New redesigned HP 2.0 magnetic lid design is available for the .22 and .25 Caliber!

    Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177,  .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • New magnetic lid design available for .22.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of all calibers is 50.25MM (1.978″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Avenger Bottle Conversion – Barrel Band
    $35.00

    Air Venturi Avenger Bottle Conversion Barrel Band

    Avenger Bottle Conversion – Barrel Band
    $35.00
    Available in two sizes:
    • Small 59-61.5mm Diameter CF Tank (Typically fits 0.35L (350cc), 0.36L (360cc), 0.42L (420cc), 0.45L (450cc), 0.50L (500cc), & 0.70L (700cc) cylinders)
    • Large 62-63mm Diameter CF Tank (Typically fits: 0.38L (380cc), 0.48L (480cc) & 0.58L (580cc) Cylinders)

     ** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **

    The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

    This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.

    Select options
  • HP MROD Exp Mag
    $35.00

    The MROD, Expanded Magazine

    HP MROD Exp Mag
    $35.00

    Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    New magnetic lid. This magazine fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it.

    Features

    • Redesigned magnetic lid design available for .177, .22, and in .25 calibers now.
    • Drop in loading.
    • Easy partial fill design.
    • .177 – 21 shots, an increase of 110% over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .22 = 17 shots, an increase of 70% more shots over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .25 = 14 shots which is an increase of  almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Airacuda & Airacuda Max .22/.25

    Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
    • The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
    • Available in right-side loading for the .22 caliber soon to come for the .25 cal.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sale!
    BUCK-RAIL 1/2 X 20 SUPPRESSOR
    $35.00 – $40.00

    Buck Rail Suppressor

    BUCK-RAIL 1/2 X 20 SUPPRESSOR
    $35.00 – $40.00

    Genuine Buck-Rail Product

    • Designed to be compatible with 1/2-20 UNF male threads
    • Stocked in 177/22 caliber
    • 3d printed in Polycarbonate plastic in the US by a veteran-owned business
    • Utilizes high quality EZ Lok steel inserts for extra durable threads
    • 7 cone-shaped interior baffle design with large muzzle exit expansion chamber
    • Dramatically reduces the report without diminishing accuracy or muzzle velocity

    Note: Photos that show a part installed are for reference only. The product shown does not include the airgun or the adapter. This listing is for the suppressor only.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.