Accessories

Sold out!
$173.00 – $175.00
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00

Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

Stock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

This setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!

NINJA REGULATORS ARE MADE IN THE USA!

Select options
$179.00
Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
$179.00

Introducing a Hajimoto Productions Exclusive offer!

13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSI

Installs on the Gauntlet with minor tank shroud modifications.

A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sold out!
Original price was: $245.00.Current price is: $185.00.
Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
Original price was: $245.00.Current price is: $185.00.
Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*

Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!

Description:
Brand Name: Hawkeye Series
Name: Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: Yes
Features:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,
– Supports WiFi
– Support for Bluetooth connection remote control (not included).

Package Includes:

1 x Camera

1 x Waterproof Case

1 x Waterproof Case Front Cover Case

1 x Bicycle Stand 1 x J Base 4 x Strap

1 x Plastic Tie

1 x Long Connector with Screws

1 x Short Connector with Screws

1 x 1/4 inch Adapters Set

2 x Mounting Base

2 x Adhesive Tape

1 x Metal Cable Tie

1 x Cleaning Cloth

1 x Lens Protection Frame

1 x Lens Protective Cover

1 x Microphone

1x English User Manual

All/any warranties are manufacturer-provided.

English Manual,
Click Here

*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Read more
Sale!
Original price was: $220.00.Current price is: $195.00.
Installation of our Sidelever on G2 or G1
Gauntlet Sidelever Install
Original price was: $220.00.Current price is: $195.00.

This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

See below for detailed shipping instructions and preparation videos.

Select options
$200.00
Tank Valve ST0031
Saber Tactical Tank Valve
$200.00

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze

Select options
$205.00
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$205.00

Introducing a Hajimoto Productions Exclusive offer!

22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI

If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sold out!
$210.00
370cc/.37L CE 5/8″ Threaded
22.5ci Carbon Fiber 4500PSI Tank
$210.00
Introducing a Hajimoto Productions Exclusive offer!
- Shaves a pound of weight off your G2 or G30.
- 22.5ci/370cc/.37L CE Certified CF Tank.
- 5/8”-18UNF Threaded so Stock Gauntlet Regulators will thread directly to this bottle.
  
  Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This is a 22.5ci / 370cc carbon fiber 4500psi max fill cylinder.

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
Read more
Sale!
$220.00 – $230.00
0.5L/500cc CE Certified CF Tank
0.50L Carbon Fiber Tank 4500PSI
$220.00 – $230.00

Half a liter of air, right here!

0.5L/500cc CE Certified CF Tank
Tank weight is 19.4 oz
Perfect fit for your custom build.

M18x1.5 Threaded

This is the same bottle we use on the TacVenger builds we offer.

Select options
Sale!
$230.00 – $385.00
Hajimoto Side Shot for Firefly 8SE 90 Degrees
$230.00 – $385.00

Hajimoto Side Shot for Firefly 8SE 90 Degrees

The Side Shot Firefly setup all done for you! Hajimoto professionally modified and installed a Firefly 8SE case so all you need to do is install your scope clamp drop in your Firefly 8SE 9o degree distortionless camera and go. You can also go with the complete turnkey solution which includes the Firefly Camera as well!

Installation video from Jeremiah @ Bullfrog Airguns check his YouTube Channel out, a very cool air gunner.

Select options
Sale!
Original price was: $240.00.Current price is: $230.00.
NEW MODEL
WestHunter WHT 4-16×44 FFP Scope
Original price was: $240.00.Current price is: $230.00.
The WHT Tactical First Focal Plane 4-16×44 Rifle Scope

Lighter, shorter, clearer glass and greater turret ranges of 60MOA over the previous HD 4-16×44 model

Package includes:
- Choice of Fixed Scope Rings (Picatinny/Weaver or Dovetail/High/Low) Use the NOTES section to communicate Picatinny/Dovetail/High or Low rings
- Scope
- Sun Shade
- Front and rear flip up lens covers
- Large Magnification Wheel (Removable)
Optional adjustable height scope rings are available

Features
- Click value for Elevation/Windage is 1/10 MIL, excellent shockproof performance, handles recoil of a .300 Win Magnum.
- Fully multi-coated high transmission glass increases light transmission, providing sharp, bright images.
- Featuring capped quick-reset turrets with stretch lockdown, no tool adjustable with MIL crisp audible clicks that allow quick reset to zero after sighting in.
- Made of anodized 6061 aircraft-grade aluminum alloy, sealed nitrogen-charged tube, shockproof, waterproof, and fogproof.
- This optic has passed very strict WestHunter performance testing.
Specifications listed below
Select options
$239.00
GoPro 2-3-4 scope cam
Side Shot for GoPro 2-3-4
$239.00

Side Shot for GoPro 2-3 or4

The world famous Side Shot scope camera system but designed to support your GoPro!

The GoPro’s stock fish lens will need to be replaced with a good high quality 90° lens like the Eaglevison 4K 1/1.8″ 12mm lens we stock

Select options
Sold out!
Original price was: $279.00.Current price is: $249.00.
FX Pocket Chronograph Mini V2
Original price was: $279.00.Current price is: $249.00.

FX Pocket Chronograph v2

The original FX Chronograph changed airguns by providing the
most important tool a modern shooter must have, in a compact, portable unit. Now FX Airguns is pleased to introduce the even smaller and improved FX Pocket Chronograph v2.

The v2 Pocket Chronograph is more pocket sized than ever at just
under the size of a 2” cube. It now has an internal battery that is recharged through an included USB-C cord. Multiple mounts are also included that allow the shooter to attach the chronograph to their rifle in multiple ways.

The chronograph itself can be used for more than just airguns. Any
projectile traveling under 1250 FPS can be accurately measured. This includes subsonic rifles, pistols, CO2 air rifles, paintball, and more. Since the unit uses radar technology, the Pocket Chronograph can be used in any weather condition without external accessories.

The setup is the same as the older version. To learn how to use it, follow the link here to watch the tutorial video.

All/any warranties are manufacturer provided.

Read more

Hajimoto Side Shot for Firefly 8SE 90 Degrees

Specifications listed below

Side Shot for GoPro 2-3 or4