Category: News

HP Magazines 2.0

by Hajimoto

Hello guys and gals we are excited to introduce a completely redesigned HP magazine that allows for easier loading and simpler operation.

The new HP Mag 2.0 will eventually replace the previous no-lid design in all calibers such as .177, .22, .25, and .30 in both the expanded and the mini versions. The new design utilizes strong neodymium magnets that allow full access to the magazine loading slot. This means no more fighting to drop pellets/slugs into a limited window or opening during loading.

The magnets force the lid to align in one direction. They are also so strong that they typically spin the lid so it aligns almost automatically!

Just like the original magazines, these HP 2.0 designs are platform-specific which means we spent many hours tweaking and adjusting fit and operation to each specific PCP. This means you will have a well-fitting close-tolerance part that is durable and looks great for thousands of shots.

The first few HP 2.0 designs to be released are the .22 Gauntlet Expanded, .22 Notos, .22 Origin Expanded, .22 Avenger Expanded, and .22 Benjamin Marauder.

Get yours HERE!

Continue Reading

Umarex G30 SL

by Hajimoto

As you guys may remember, we stopped installing our Side Lever in the G30 but were not able to tell you why. Well, we can tell you why now!

Introducing the Umarex Gauntlet 30 SL! That's right the G30 now is available with Side Lever cocking. Once all the Stock Bolt Action G30's in the warehouses are gone, you will only be able to snag the G30SL.

We have both in stock and in all of the configurations you would expect including our G30 Builder which allows you to select the options you want to create your own package.

Just to be clear we do still offer our Sidelever option on all G1 .177/.22/.25 or G2 .22/25 Calibers. Just go to AIRGUN SERVICES or click HERE to be brought directly to the Service.

Continue Reading

PowerFlex Combo

by Hajimoto

Christmas Deal!

Get your G2 or G30 outfitted with our PowerFlex Combo. This como allows you to adjust your operating pressure on the fly, without the need to degas or go internal to the PCP to adjust. The carbon fiber tank provides 370cc / 22.5ci of volume and shaves off 1/2 a pound in weight. As you can see, the tank length is far more appealing and balanced.

Being able to adjust your operating pressure means you can dial your Gauntlet in to get the most out of the ammo you are shooting. We even made a video showing how simple it is to install yourself.

Get yours today!

Continue Reading

Email Scams that appear as HajimotoProductions

by Hajimoto

There are email scams being sent to our customers that tell the user that their password is soon to expire. It gives the option to continue to use the old password or to update your existing one. Please be advised that your password here at HajimotoProductions.com does not expire.

What good security protocol notifies an end user that their password is soon to expire and then gives them the option to still use it??? That in itself should be a red flag if you receive such an email.

If you have received the above-described email and possibly clicked on the "Use Old Password" box, let us know as you may have provided the scammers with information for them to hack your account with us.

First, make your way to our site by manually typing HajimotoProductions.com in your browser so you know your going where you are supposed to go and change your password manually. If are not able to log in to your account or not able to change your password, contact us.

Continue Reading

Sidelever Free Install Ending Soon

by Hajimoto

Wuzz Gowin Owin Peeple?

As you all know back in February of 2023 we shared in an ARTICLE here at Hajimoto Productions, where we were regarding our non-destructive modification that adds a sidelever to the Umarex Gauntlet 1, Gauntlet 2, or the Gauntlet 30 caliber variants for $150 USD

We explain in the ARTICLE why we were not able to offer the sidelever as a stand-alone part and to be fair to all involved, we opted to continue to offer the sidelever as a service for the same price of $150 USD.

On July 22, 2023, will be 5 months that we have installed hundreds of our sidelever for the standalone price.

This blog post is to announce that starting on July 23, 2023, we will no longer be installing the sidelever labor free. We will be charging $220 USD for our sidelever installed in your Gauntlet 1, Gauntlet 2, or Gauntlet 30 caliber.

Thank you for your support.

Hajimoto

Continue Reading

Service Not Stand Alone

by Hajimoto

Wuzz Gowin Owin Peeple!

It’s time for another update for the Hajimoto Productions Sidelever for the Umarex Gauntlet. As you all should know by now all the delays associated with the side lever due to supply chain and out-of-specification items that are covered in detail in previous blog entries so we will not relive that here.

As I explained in our last update, we are past that and have started building the G30s that we had received orders for in the first release announcement which was before we realized we had an out-of-specification issue that needed to be resolved.

We have built and shipped over 30-something G30 builds with the side lever and opened up phase 1A which was to start accepting build orders once again for the G30s which have the side lever option.

We also shipped out several Hajimoto Side Lever assemblies to trusted known air gunners to get feedback on the ease of installation and any improvements that may need to be considered.

The feedback we received from these test installers let us know that there are too many manufacturing variables in all of the Gauntlet versions that exist. These Gauntlets have over seven different machining differences that are impossible to identify until the PCP is a part. This is a manufacturing revision or product evolution variable that makes it all but impossible for us to ship a single product that can accommodate all seven possible variations.

There will not be an installation fee associated with the service, we will simply charge for the lever assembly. We will offer this for sometime to allow those of you that were waiting in the wings for the part. 

I know some of you will be bummed and we would rather have you bummed than frustrated with a stripped bolt handle fastener or being unable to remove the cocking handle at all. If either of these conditions happens, it requires shipping the action to us which is more time and specialized tools to correct.

There will be some of you that have the tooling and ability to attack this installation but most of you will not and it is that majority that is something we are willing to risk our reputation on.

The next hurdle is shipping costs. We suggest that the action be taken out of the stock. The bottle and barrel be removed for shipping. This will substantially reduce shipping costs and it gives us only the part we need to do the installation.

Based on the dimensions of the Umarex Gauntlet action minus the stock and the barrel, a USPS Medium Flate Rate Box Side Loading with a cost of $17.10 would be the most cost-effective option.

The other option is to ship the entire rifle and we will do the installation, but shipping the entire rifle will triple shipping costs and may put the total cost out of reach.

It is never easy to share bad news but like I have said previously, us receiving news that you are frustrated and want to toss your PCP out the window because you are not able to execute the installation as easily as our install video shows is a far worse scenario for us.

We are currently working on adding the Sidelever installation service to the SERVICES list and will announce when it will be available.

UPDATE: The Service is now LIVE!

Humbly

Team Hajimoto Productions

Continue Reading

Gauntlet Sidelever Update #4

by Hajimoto

As was forecasted in our previous NEWS post, we should have had the remanufactured parts in our hand by January 11, 2023, and would have if not for the fact that all U.S. domestic flights were grounded due to a complete failure of a key FAA safety system.

Once the delayed delivery of the parts was received, we built three side lever assemblies and confirmed that the reworked parts were within the specification and we could start filling our build orders.

As was explained in previous updates, we will be rolling the side lever systems out in phases. There will be three (3) Phases each Phase will consist of a Build Stage (A) and a Kit Offering stage (B). These Phases and associated Stages will be announced right here in the NEWS Blog for reference and information.

Phasing

Phase 1A – We’re going to attack all Gauntlet .30 caliber builds first. This means we have and will continue to fill all the G30 orders we received when we first announced the availability of the side lever system. There were 21 of you that stuck it out and by the time you are reading this, most will have your G30 build with the side lever installed and on its way to you. Thank you for your patience and support as we worked through this manufacturing delay.
Phase 1B – Once we have all build requests complete, we will make the .30 Caliber Side Lever System available as a do-it-yourself installation kit.

Phase 2A – We will be offering Gauntlet 2 .22/.25 build packages that include the side lever system.
Phase 2B – Once we have our Gauntlet 2 .22/.25 builds underway and manageable, we will roll out the do-it-yourself installation kit.

Phase 3A – Shortly after the DYI kits for the G2’s are released we will start accepting build packages for the Gauntlet 1.
Phase 3B – Once we have our Gauntlet 1 .22/.25 builds underway and manageable, we will roll out the do-it-yourself installation kit.

Video Production

We will be producing video instructions for the do-it-yourself kits which will show up on the product page so you have a very detailed and clear step-by-step installation guide to follow.

Previously Published Information

If you have any questions about pricing and so forth, please refer to the previous NEWS posts on this subject as it was shared in those articles.

Thank you again for your patience and support.

Hajimoto

Continue Reading

Sidelever Saga

by Hajimoto

Hello folks,

 This is the latest information regarding the Hajimoto Side Lever production saga. As I explained in my previous articles on this topic, the machinist manufactured one of the components out of spec which made the entire assembly unusable. So we had to wait for the one component to be remade and then refinished so we could complete the assembly and build the parts.

This couldn’t have happened at the worst time of the year it was the perfect storm for delays. The country is dealing with supply chain issues and raw material shortages and it is the busiest time of the year because of the holidays that happen at the end of the year.

Understandably the anodizing outfit (which is a separate firm) had a full production schedule without a single day of room to try and squeeze this rework in. Because of this delay, we stopped taking any additional build orders for the builds that offer the Hajimoto Side Lever until we have the parts in hand.

We recently had a conference call with the machine shop and the anodizing company to discuss where we are with the completion of these parts. If the last 3 years have taught us anything it is “if it can happen, it will happen”, so in keeping with this trend the parts are said to be a couple of weeks out from shipping.

That would put the parts in our hands on January 11, 2023. This is what we are shooting for and we will plan accordingly. The rollout will still be what was previously shared.

  1. .30 caliber builds will be first, then levers offered separately.
  2. Generation 1 .177, .22, and .25 builds first then user installable side levers separately.
  3. Generation 2 .22 and .25 builds first then user installable side levers separately.

As a reminder, we will be producing and sharing a detailed installation video of the Hajimoto Side Lever System on all variants of Gauntlet so you will have a step-by-step easy-to-follow video if you want to install it yourself. We just recommend that you own a strong quality 2.5mm allen wrench that is at least 4” in length and preferably has a T handle for torque. Please do not skimp here, you need a professional-grade tool else you run the risk of stripping the hex-headed retention screw in the cocking bolt.

The reason for the phasing of release is so we have a manageable rollout and it allows us to produce video instruction on the actual parts that you will be receiving rather than try to edit in any changes after the fact. You guys know how it works, nothing dies on the internet.

To all of you that are patient (or not so patiently) waiting, we appreciate you. So in closing, while things like this manufacturing/production delay cause us angst and frustration, this time of year reminds us that those around us matter more than the things around us.

The new year is upon us and I would like each of you to take a deep breath in and exhale all the difficult 2022 air, angst, frustration, and disappointment so we can focus on what is to come and be grateful we are here to anticipate what it has to offer.

We wish you all happy holidays and a Happy New Year.

Hajimoto

Continue Reading

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.