$289.00–$390.00Price range: $289.00 through $390.00
A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.
Collet Clamp System includes:
1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
1 x 2B-USH which includes:
Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
34 mm to 30 mm Ring Adaptor
34 mm to 25 mm Ring Adaptor
1 x 2B-UCH which includes:
2 x Aluminium Bars (17 mm long)
1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
2 x Ball Screws
2 x Ball Grab Screws
1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.
Here is another video that shows the Eaglevision Scope Cam USH system being installed.
Please be sure to visit his awesome YouTube channel for some really great airgunning content.
Here are some valuable tips to help you record the best quality video:
1. Use a good scope with decent lens clarity and a larger objective to gather maximum light.
2. Use a high-quality camera for recording;
any action camera with a minimum resolution of 1920×1080 and 120 Frames per second. For the best slow-motion capture, 240FPS is preferable.
3. Obtain a good quality fixed camera lens like the 4K 1/1.8” 12MM for the GoPro for instance.
4. Ensure that the scope and camera are set up and aligned correctly.
5. Use lower magnification with the scope, you will notice improved quality by using a fixed magnification, eg. 10×44
(Eaglevision does not recommend over x 10 magnification with the most common scopes on the market).
6. An optical zoom is preferred over digital zoom, which makes a lower image quality.
QUESTION: Hajimoto why not use a GoPro 8, 9 thru 13?
ANSWER:
Because in order to use a GP as a scope camera you need to swap out the fisheye lens with a high-quality nondistortion lens. The GP8 is not easily serviceable. As for the GP 9 thru 13, currently, we offer a version that can be found here.
Additional information
Weight
8 oz
Dimensions
8 × 6 × 2.5 in
Image Split
50% x 50%, 25% x 75%
Attachment Method
USH-46, Two Bar System
Reviews
There are no reviews yet.
Be the first to review “Eaglevision Scope Cam for GP 5,6,7 Hero Black” Cancel reply
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using GoPro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens, and because it is 12mm, you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
Custom GoPro fitting Lens
We stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.
Please note: The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC
Just click HERE to be redirected to this product on his website. Be sure to tell Bob that Hajimoto sent ya ?
The Umarex Notos was designed to be flexible to your shooting needs. The Notos has plenty of accessory rail on the top side of the rifle allowing shooters to install the optic of their choice or, a set of fixed sights. The high-contrast Fiber Optic elements pick up plenty of available light for quick accurate shooting in all lighting conditions. These Fiber Optic sights can be installed in just minutes.
Umarex Notos Fiber Optic Sights
Front and Rear Fiber Optic Sights
Compatible with Umarex Notos PCP Airgun
NOT COMPATIBLE WITH HAJIMOTO MAGAZINE FOR THE NOTOS
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).
Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Description:
A direct replacement camera case latch buckle but made from aluminum.
This is my aluminum CNC’d camera case latch replacement. Eventually, the lightweight plastic latch that comes on the Firefly Camera case fails and that means your camera is not held in place and you are not able to record your shots through your scope camera assembly. This part requires your original wire hinge piece which typically never breaks.
All products offered on our website are intended for airgun use only.
Federal law prohibits using a product in any way not consistent with its intended use.
It is the purchaser's responsibility to know and comply with all applicable state, county, and local laws and ordinances. Dismiss
Reviews
There are no reviews yet.