Additional information
| Weight | 16 oz |
|---|---|
| Dimensions | 5.5 × 4 × 2 in |
N2 Fill Station
$54.99
N2 NitroAir Fill Station for 32g Nitrogen Cartridges
Don’t let the lack of a convenient high pressure air supply keep you from shooting! The Umarex N2 Fill Station is the easy, compact, and convenient solution to filling afield, at home, or in place of an equipment failure. Simply stock up some Umarex NitroAir® 32 gram cartridges, our N2 Fill Station and use when you are ready. The N2 Fill Station accepts standard PCP male Foster fittings, either direct to the rifle, or with the appropriate hose.
You must be logged in to post a review.
You may also like…
-
$27.99N2 Two Pack
Umarex NitroAir® Prefilled Nitrogen Cartridges (2pk)
$27.99Select optionsNitroAir® is the first pre-filled cartridge loaded with compressed nitrogen gas for use with N2-designated airguns.
Umarex NitroAir N2 Cartridge, 2 Pack
- Compatible with Umarex Komplete rifles
- Recyclable/disposable
- Approxamately 45 shots per cartridge
- Nitrogen filled
- 2 pack
Related products
-
$350.00Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$350.00Select options This product has multiple variants. The options may be chosen on the product pageIntroducing a Hajimoto Productions Exclusive offer!
DISCONTINUED: NO LONGER OFFERING THIS ITEM (22ci ALUMINUM TANK)
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSIIf you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.
A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
-
Sold out!
$65.00Reg Pressure Tester
HubenPower Regulator Tester
$65.00Read more
High quality HubenPower reg tester.
Features
- Micro threaded activation knob.
- Built in quick action pressure relief knob.
- High pressure gauge to 6000 psi.
Don’t guess what the output of your regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.
Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.
-
$12.00for .177, .22 and .25 NOT .30
Umarex Gauntlet Aluminum Air Stripper
$12.00Select options
This part is for the Umarex Gauntlet 1 or 2 in .177, .22, or .25 Calibers.
Part does not fit Gauntlet .30 caliber
This part is designed and manufactured by DonnyFL
Reviews
There are no reviews yet.