Description
Features:
- 5000psi Working Pressure
- 1/8 NPT Female Threads
- Durable for scuba-fill station and Remote Hose.
- All-Black Tactical look
- Made in the USA
NINJAMQD
$15.95
The Ninja QD Quick Disconnect Female Coupler 1/8 NPT provides a fast, simple, and leak-free connection and disconnection point for pressurized air lines, typically in High-Pressure Air (HPA) systems for paintball.
• Quick and Easy Operation: Allows users to connect and disconnect air hoses or remote lines by hand without the need for tools. This is especially useful for quickly swapping components like different guns using one air system, or removing a remote line from an HPA tank.
• Secure, Leak-Free Seal: When connected with a compatible male plug, the fitting uses a ball-latching mechanism and internal O-rings to form a secure, high-pressure seal, preventing air leaks during operation.
• Durability: The coupler is made of durable materials with a black coating and withstands high pressures, commonly rated for up to 5000 psi.
• Standard Compatibility: The 1/8 NPT (National Pipe Taper) female thread allows it to adapt to a wide range of components that have a male 1/8 NPT thread, such as remote lines or fill station adapters.
3 in stock
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 2 × 1 × 1 in |
You must be logged in to post a review.
Related products
-
$45.00Regulator Service or Pressure Change
Regulator Service or Pressure Change
$45.00Select optionsThis is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.
Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units, and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output, and so forth.
I wrote an article on the regulator change back in 2019, read all about HERE
Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.
When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.
This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.
Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.
-
Sold out!
$21.953/4″ Black face 3000PSI gauge
3000PSI 1/8″ NPT Pressure Gauge
$21.95Read more- 1/8″ NPT THREAD
- 3000PSI DIAL MAX
-
$18.50Umarex Gauntlet Regulator Shim Pak
$18.50Select optionsHajimoto Productions Regulator Shim Kit For Umarex Gauntlet
I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.
The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
(Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.
You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.
If you rapid fill, there is a good chance you will pop your burst disc.
Reviews
There are no reviews yet.