Description
FEATURES
- Lightweight aluminum design.
- Black all tactical look.
- 1/8 NPT female threads.
- Made in the U.S.A.
Ninja UFA
$28.95
The Ninja UFA (Universal Fill Adapter) is for Remote Coils, CO2 Fill Stations, Regulator testers, and more!
This unit also allows you to release air from any paintball tank safely for travel, maintenance, and testing. The Ninja UFA is what Hajimoto Productions uses in its complete Paintball Regulator Tester and comes with a large-faced gauge for easy reading.
Additional information
| Weight | 5 oz |
|---|---|
| Dimensions | 3.5 × 1 × 1 in |
You must be logged in to post a review.
Related products
-
$9.95Burst Disk Two Pack
Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
$9.95Select options This product has multiple variants. The options may be chosen on the product page
- 1.8K burst disk is used as the low-pressure burst disk on 3K and 4.5K tanks
- 3K burst disk is used as the low-pressure burst disk on 3K and 4.5K tanks
- 5K burst disk is used as the high-pressure burst disk on 3K tanks
- 7.5K burst disk is used as the high-pressure burst disk on 4.5K tanks
Actual burst disk finish may be Black, or Bright depending on availability.Â
The Flex Reg above is for illustration purposes only and is an example of 5K and 7.5K Burst Disks installed.
The Flex reg is NOT included -
$45.00Regulator Service or Pressure Change
Regulator Service or Pressure Change
$45.00Select optionsThis is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.
Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units, and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output, and so forth.
I wrote an article on the regulator change back in 2019, read all about HERE
Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.
When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.
This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.
Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.
-
Price range: $310.00 through $325.00Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
Price range: $310.00 through $325.00Select options This product has multiple variants. The options may be chosen on the product pageIntroducing a Hajimoto Productions Exclusive offer!
13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSIInstalls on the Gauntlet with minor tank shroud modifications.
A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
Reviews
There are no reviews yet.