EagleVision 1/1.8″ 12MM LENS
$160.00
Lens fits the GoPro 9, 10, 11,12 and 13.
GoPro 9, 10, 11, 12, and 13 cannot be used on the scope cam without changing the lens.
In order to use this product as intended, you MUST watch the below video on how to change the lens.
Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.
Your camera will be out of warranty if you remove the lens.
DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.
The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. T4 screwdriver included.
This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.
We are not responsible for any damage you may cause to your camera when doing the lens swap.
Lens swap video
[youtube https://www.youtube.com/watch?v=kyO6ENcNhb4]
9 in stock
Additional information
| Weight | 2 oz |
|---|---|
| Dimensions | 3 × 3.5 × 1.25 in |
You must be logged in to post a review.
Related products
-
Price range: $15.00 through $70.00Bipod and Picatinny Rail
Price range: $15.00 through $70.00Select options This product has multiple variants. The options may be chosen on the product page
Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
-
$40.00For the Gauntlet 1 or 2
Umarex Gauntlet 1/2 x 20 adapter #A23
$40.00Select options
This part is designed and manufactured by DonnyFL
-
Price range: $11.00 through $20.00For G1 G2 & G30 Variants
Umarex Gauntlet Tune O-ring Kit
Price range: $11.00 through $20.00Select options This product has multiple variants. The options may be chosen on the product pageHajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes two of my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
Reviews
There are no reviews yet.