Umarex Parts/Mods

[wcas-search-form]
  • Sold out!
    FX/DonnyFL 1.36 x 5 inchesFX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Tatsu 1.6 x 4.25 inchesTatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Gauntlet Short Shroud ComboGauntlet Short Shroud Combo
    Price range: $130.00 through $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    Price range: $130.00 through $215.00

    Part fits Gauntlet 1 or Gauntlet 2 .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

     

    Select options This product has multiple variants. The options may be chosen on the product page
  • Gauntlet Tactical Combo BuilderGauntlet Tactical Combo Builder
    138 to 338

    Build your own Tactical Gauntlet Kit

    Gauntlet Tactical Combo Builder
    138 to 338

    Gauntlet Tactical Builder!

    If you just want the Tactical Grip Adapter Product Page, Click HERE

    You select the parts you wish to add to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

    The builder starts with the Grip Adapter, fore grip, and included pistol grip.

    Installation video is listed below

    The Video Starts with the rear trigger group screw removed. To install the M5x20 fastener shown in the video, the fastener must be removed.

    Select options
  • UX/Ninja X-Reg ON 13ci 3K CylinderUX/Ninja X-Reg ON 13ci 3K Cylinder
    $145.00

    Ninja 13ci 3000PSI Air Tank with UX/Ninja X Reg

    UX/Ninja X-Reg ON 13ci 3K Cylinder
    $145.00 

    This is a fully serviceable Ninja X-Reg that was produced for UX. We build it to your selected custom output pressure and we mount it on an aluminum 13ci bottle that holds 3000PSI. 
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator
    Select options This product has multiple variants. The options may be chosen on the product page
  • Sumo 1.6 x 6.25 inches
    $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options This product has multiple variants. The options may be chosen on the product page
  • HubenPower Zelos RegulatorHubenPower Zelos Regulator
    Price range: $150.00 through $410.00

    Umarex Zelos Regulator by HubenPower

    HubenPower Zelos Regulator
    Price range: $150.00 through $410.00

    • For Umarex Zelos
    • Can be installed in 300bar/4500psi tank，Provides pressure reduction function for Umarex Zelos’ 300bar tank, reducing the 300bar/4500psi tank pressure to below 250bar/3625psi
    • Installs directly without modification
    • Rotary joint design, easy to adjust the position of the pressure gauge and fill nipple.
    • Stainless steel material, strong and durable
    • The factory set output pressure is approximately 22~24Mpa (3190~3480psi). This is not the final shooting pressure, Do not adjust!. （Do not turn the bottom adjustment knob if you are not sure what you are doing.）
    • Umarex Zelos has an internal regulator. When you need to adjust the pressure for actual shooting, adjust the internal Zelos original regulator.
    • Please do not adjust the output pressure of this product to more than 250bar (3625 psi)
    • Comes equipped with a standard 8mm quick-disconnect male foster fitting adapter for filling.
    • The regulator has a high air flow rate, is lightweight, easy to operate, and rebuildable.
    • Compatible with Air/CO2.

    If you are just purchasing the valve alone, you still need to select a tank finish option for the sale to process.

     

    Select options This product has multiple variants. The options may be chosen on the product page
  • Sale!
    Huben Power - Dream-Notos/Notos G2 TKHuben Power – Dream-Notos/Notos G2 TK
    Original price was: $175.00.Current price is: $160.00.

    Used as the Haji-Notos/Notos G2 Power Plant

    Huben Power – Dream-Notos/Notos G2 TK
    Original price was: $175.00.Current price is: $160.00.

    For the Umarex Notos and Notos G2
    Genuine Huben Power Regulator with Power Plenum

    This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos/Notos G2 to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

    FEATURES

    • Externally adjustable Regulator Output 500psi~3600psi
    • Ultra-stable output pressure
    • Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
    • Standard 8mm quick disconnect male foster fitting adapter for filling.
    • Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
    • Tank Threads : M18*1.5
    • Power Increase on the fly but decrease requires degassing the plenum.

    ** BE SURE TO READ DETAILS BELOW **

    Select options
  • Sold out!
    Ninja 22ci 3000PSI Air Tank with UX/Ninja X RegNinja 22ci 3000PSI Air Tank with UX/Ninja X Reg
    $170.00

    UX/Ninja X-Reg ON 22ci 3K Cylinder

    Ninja 22ci 3000PSI Air Tank with UX/Ninja X Reg
    $170.00

    DISCONTINUED: NO LONGER OFFERING THIS ITEM

    This is a genuine Ninja Paintball High Pressue X Reg in 5/8″-18UNF thread on a 3K PSI Bottle.

    This is an aluminum 22ci (360cc) bottle that holds 3000PSI including a Ninja X-Regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

    PRESSURE – STOCK AND RECOMMENDED
    Stock .177/.22 | 22ci/3000/1100PSI Regulator
    Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

    Stock .25 | 22ci/3000/1900PSI Regulator
    Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

    This setup is for the original Umarex Gauntlet 1 with the Black stock.


    NINJA REGULATORS ARE MADE IN THE USA!

    Select options This product has multiple variants. The options may be chosen on the product page
  • Sold out!
    Fat Boy 2 x 4.25 inchesFat Boy 2 x 4.25 inches
    $175.00

    2 x 4.25 inches Fatboy 2.0

    Fat Boy 2 x 4.25 inches
    $175.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    2 x 4.25 inches Fatboy 2.0

    Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.

    Features:

    • Compatible with .177 to .30 calibers 
    • Includes 3 interchangeable air strippers
    • Redesigned 1/2 x 20 rear cap for easy gripping
    • Can be used with the 6.25 inch extender for more hush power
    • Measure 4.25 inches long by 2 inches in diameter
    • Weighs only 6.7 oz
    Read more
  • Sold out!
    Shogun 1.6 x 8 inchesShogun 1.6 x 8 inches
    $185.00
    Shogun 1.6 x 8 inches
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Ronin 2 x 6.25 inchRonin 2 x 6.25 inch
    $185.00
    Ronin 2 x 6.25 inch
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.

    The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.

    We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.

    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
    The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs

    If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.

    Select options This product has multiple variants. The options may be chosen on the product page

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.