Price range: $110.00 through $175.00PCP Air Compressor Filter 4500psi Oil Water Separator
Price range: $110.00 through $175.00Select optionsA quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.
Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.
Made from high-quality aircraft aluminum and is rated for safe use.
Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.
Available with a 47″ high-quality stainless steel fitting hose to allow for convenient filling of your PCP.
- Sale!
Price range: $125.00 through $130.00300CC 4.5K PSI M18 Threaded CF Tank
0.30L M18 Thread Carbon Fiber Tank
Price range: $125.00 through $130.00Select optionsFeatures
- Lightweight High Pressure Carbon fiber Cylinder
- 300cc/0.30L capacity
- Available in Gloss Or Matte
- 251mm x 55mm
- M18 Threaded
Shown Below On the HajiNotos
- Sale!
Original price was: $150.00.$130.00Current price is: $130.00.User adjustable M18 regulator
Huben Power Black Hawk Pro
Original price was: $150.00.$130.00Current price is: $130.00.Select options
The Huben Power Black Hawk Pro is a very stable, high-flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to what is required for the application. The quality of materials and craftsmanship is top-tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.
FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Streamline and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high-pressure gauge input.
- Regulating output pressure range 500psi~3600psi
- Comes with a standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may randomly be green or black.
- The regulator has a high airflow rate, is lightweight, easily operational, re-buildable, and designed for use with HPA/CO2.
SKOUT USERS*
This regulator does not have a pin on the top of the regulator. This means EPOCH owners are ok, but EVO cannot use this regulator. - $144.95
Ninja X Reg Custom Output Regulator up to 3100psi
Ninja High Pressure 5/8″-18UNF Custom Output Regulator
$144.95Select options
This is a genuine Ninja Paintball High Pressue X reg in 5/8″-18UNF thread that can be used on 3000PSI or 4500PSI.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.
You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/
This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP regulator output pressures in increments of 100PSI. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance.
- Sale!
Price range: $150.00 through $160.00360CC 4.5K PSI M18 Threaded CF Tank
0.36L M18 Thread Carbon Fiber Tank
Price range: $150.00 through $160.00Select optionsFeatures
- Lightweight High Pressure Carbon fiber Cylinder
- 360cc/0.36L capacity
- Available in Gloss Or Matte
- 9″ x 2.4″ (228mm x 61.5mm)
- M18 Threaded
Shown Below On the HajiNotos
- Sold out!Price range: $154.95 through $155.00
Ninja High Pressure Metric M18 Custom Output
Price range: $154.95 through $155.00Select optionsDISCONTINUED SEE OUR BLACK HAWK PRO LISTING
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.
You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/
The ball and spring are provided but removed from the regulator.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
$160.00UX/Ninja X-Reg ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with UX/Ninja X Reg
$160.00Select options
This is a genuine Ninja Paintball High Pressue X Reg in 5/8″-18UNF thread on a 3K PSI Bottle.
This is an aluminum 22ci (360cc) bottle that holds 3000PSI including a Ninja X-Regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.
PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI RegulatorStock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 RegulatorThis setup is for the original Umarex Gauntlet 1 with the Black stock.
NINJA REGULATORS ARE MADE IN THE USA!- Sale!Original price was: $175.00.$160.00Current price is: $160.00.
Used as the Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.$160.00Current price is: $160.00.Select options
Genuine Huben Power Regulator with Power Plenum
This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.
FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
- Sold out!Original price was: $210.00.$169.00Current price is: $169.00.
G1 Regulator, 22ci Tank and Barrel Band
Gauntlet 1 Power Bundle
Original price was: $210.00.$169.00Current price is: $169.00.Select options
Our Gauntlet 1 Power Bundle! For the Umarex Gauntlet 1 in .177, .22 or .25 Calibers (Bundle is not for the Gauntlet 2)
The Bundle Consists of the following:
- Brand New Ninja Regulator (1100psi, 1300psi, 1900psi, or 2100psi)
- Brand New 22ci 3000psi Aluminum Tank for 70% more air volume!
- Our HP Barrel Band with Picatinny Rail for Flashlight or Bipod.
All for the cost of a regulator alone!
PCP/CALIBER STOCK PRESSURE BOOSTED PRESSURE G1 .177 1100PSI 1300PSI G1 .22 1100PSI 1300PSI G1 .25 1900PSI 2100PSI - Sale!Price range: $175.00 through $424.00
With or Without Cylinder
Doux Avenger Bottle Adapter
Price range: $175.00 through $424.00Select options
Convert your Air Venturi Avenger into a bottle PCP!
Does not fit the Avenge-X- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa
Installation video below:
- Sold out!
$200.00Tank Valve ST0031
Saber Tactical Tank Valve
$200.00Read more
Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze
- $220.00
370cc/.37L CE 5/8″ Threaded
370cc/.37L/22.5ci Carbon Fiber 4500PSI Tank
$220.00Select optionsIntroducing a Hajimoto Productions Exclusive offer!
- Shaves almost a full pound of weight off your G2 or G30.
- 22.5ci/370cc/.37L CE Certified CF Tank.
- 5/8”-18UNF Threaded so Stock Gauntlet Regulators will thread directly to this bottle.
Installs on the Gauntlet 2 with minor tank shroud modifications, and the bottle shroud slides right over the carbon fiber cylinder.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This is a 22.5ci / 370cc carbon fiber 4500psi max fill cylinder.
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
